My apostrophe-rich-text widgets give me a editor-plugin-required. {plugin: "toolbar", requiredBy: "clipboard"} error in the console. I'm trying to add 'Bold' to the toolbar and it shows up, but when I click it nothing happens.
Additionally, the node_modules folder is gone from my local application and github repo. I'm fairly new to node, so I'm not sure if that's normal, but I'm pretty sure it was there during production. I don't have any modules that extend the apostrophe-areas module, so I'm not sure where the error is coming from.
How can I get the error to go away and the toolbar to actually make changes?
Related
Many bugs and errors in 2SXC installation
Can someone please give me some help?
This is supposed to be trivially easy.
I have spent 7 hours on this and got nowhere.
In deploying the module on new DNN install :
DNN PLATFORM
v. 09.02.01 (533)
Install 2SXC into the DNN - Successful
Deploy Content Module on to empty page: Successful
Click circular icon. Popup appears requiring Auto Configure button to be clicked.
Auto-Configure Content for 2sxc 11
Dialog Text:-
Auto-Configure Content for 2sxc 11? (Yes, I do)
install recommended content package? (Yes, I do)
Popup: Do you want to install these packages? (Yes, I do)
- Default content for 2SXC11
It takes about 10 seconds per package. Don't re-load the page while it is installing.
I click OK
1 second later
Popup: An Error occurred.
An Error Occurred
Spinner rotates ad infinitum
Try the help page: It says:-
"Run Auto-Configure and confirm the "are you sure" question, then wait a few seconds. Once you see the confirmation, everything worked". (Oh, No. It certainly did not!)
Installing default content templates
An error occurred.
Looked up the Wiki
Tried to upload the Content Templates .zip file into a Content Module Admin/App. An Error Occurred on the upload. Instruction says: See below for error. (There was nothing below).
Any advice welcome!
What you describe should be really easy - I agree.
My guess is that something has gone wrong in a way that's hard to spot. Maybe an installation once got interrupted or something like that. It should be easy, so I really suggest one of the following options:
Quickly replay the same scenario with a blank DNN to experience how it should work, and to ensure that your PC isn't doing something funny (for example, the file is downloaded by the DNN server, and if your PCs firewall would prevent the IIS from getting files, this would fail).
If that worked, probably just uninstall 2sxc completely and also uninstall the DB (that doesn't happen automatically, because you may just uninstall and want to keep the data) - use https://azing.org/2sxc/l/Kf5yDYQq/uninstall-2sxc - then try again
Ask a friend to play this through once with you
We just installed 2sxc on our development site, I’m super hopeful about it working - especially its ability to generate a json / json api. But! Today I used the Evoq page settings to delete “Content” instances on a test page - after that the “Add Module” to add a new “Content” instance fails - 2sxc’s javascript fails. Mysterious why just removing then trying to add “Content” instances would break 2sxc.
In Xaml, I'm trying to make an image do something when tapped (I'm testing it on Android). The Image tag of the Button class seems to be exactly what I need, but the following code breaks my application:
<Button Clicked="OnListClicked" Image="chimp.jpg"/>
Even though it works fine when I remove the Image tag. I could probably figure out what's wrong if I had an error message, but all that is shown is:
Your app has entered a break state, but there is no code to show because all threads were executing external code (typically system or framework code).
I've had issues with my Xaml code before, and I would get the same message. I'm confused though...my Xaml isn't external, is it? It's just a Xaml file inside my shared project, like any other file.
Under Exception Settings, I have every single box checked, and I also added XamlCompilation:
[assembly: XamlCompilation(XamlCompilationOptions.Compile)]
namespace MyApp
{...
so I'm not sure what else I can do to start getting error messages. And I'm using Image in exactly the syntax described in the documentation, so I'm not sure what could be the issue with my Xaml. Anyone have any thoughts about any of this?
The reason I wasn't getting a specific error message was that I was actually navigating to the page with the errors from another page. When I set the page with errors to my root page, I started getting error messages again.
Apparently, my runtime's memory was running out before it could render the image. I had noticed before that my app was limited to five images: any images after the fifth one simply didn't show up. I've never gotten an error for it, though. Perhaps since this time it was a button, it "needs" to be displayed for normal functioning, and that's why it's throwing an error this time?
Either way, I just removed images until there were only 5, including the button image, and now it displays without issue. I'm not sure if this is expected behavior, though. I don't see why my runtime wouldn't be able to handle more than 5 images.
I am currently building a Windows Universal App and the learning curve is OK. I get a response from my webservice, parse the JSON, display info in the app, but my current issue is the following one:
I tried to display an image that I put in the Assets folder, but this doesn't seem to work.
This is my layout:
As you can see, the text "Test" is correctly displayed but not the images.
On the right side, in the explorer pannel, I cannot see the files that should be here:
WHAT I HAVE TRIED:
In my example, they are in the Assets/picto folder, but I have also tried the root directory Assets, as wal as creating Image folder at the same level.
I have definitely no idea how to add a simple picture, so any help is appreciated!
Adding items in Windows explorer to the right location doesn't add them to your solution / deployment.
You have to right-click the picto folder -> Add > -> Add existing item. Your items are not even in your solution, so they won't show up on the layout screen.
Make sure you set the correct build target for each image.
If an image shouldn't show up, even through it's in your solution, this is often the reason.
I'm implementing an AspDotNetStorefront (ASPDNSF) site for a client, they've purchased the source code and I'm just trying to do something simple like add an ID for CSS styling to the product images.
I've gone into the source and made the AspDotNetStorefrontCore.XSLTExtensionBase.LookupProductImage() method just return the string "TEST" expecting any product image to be replaced with "TEST", compiled the solution using Visual Studio's build. It builds successfully and the DLLs in the /web/bin directory now reflect modified dates the same as my build time, but the rendered page does not reflect my changes. I've reset the cache through the ASPDNSF admin page, but still no change.
Any idea what step I'm missing?
So this turned out to be me being an idiot. Many of the methods in XSLTExtensionBase have several overloads, I was just making the change in the wrong overload. Simply compiling the project is all you need to do to deploy, but you have to change the right code for it to render what you want!
Error in loading component: [jDialog]->mainPanel->titleBar
cannot create instance of <qualified classname>
The component cannot be loaded.
Error in loading layout: [JDialog]->mainPanel->[layout]
Failed to initialize layout of this container
Errors occured in loading the form data. It is not recommended to use this form now in editable mode - data that could not be loaded would be lost after saving the form. Please go through the reported errors, try to fix them if possible, and open the form again. If you choose to open the form as View Only you may see which beans are missing.
recently moved a class that was being used in several forms but all the paths in both form and java files were updated to point to the new location. Anyone know what could cause an error like this?
Things I have tried: clean + build, removeing and re-adding all library jar files, making sure the title bar and the old version in SVN were identical except for the package changes. Doing the same comparison with their respective form files.
In the View menu there is an IDE log option that allowed me to see what was happening behind the scenes to cause this error.
custom code for the text of one of the labels was throwing an exception.