I am trying to install a Github project named oTranscribe on my system, this is the first time I am installing any project from Github.
I followed the given process to install the project:-
Install Node.js and NPM
Run npm install to install dependencies
Run make build_prod to compile the dist folder.
I successfully completed the first two process, and installed make on the system and added the PATH variable as well. The problem comes when I try to run the last command i.e make build_prod; when I execute the command and press enter the command prompt does nothing and when I press enter twice it shows me the following error.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\AUDICHYA>cd C:\xampp\htdocs\oTranscribe-master
C:\xampp\htdocs\oTranscribe-master>make build_prod dist
make compile_static
make[1]: Entering directory `C:/xampp/htdocs/oTranscribe-master'
# clear out existing dist folder
process_begin: CreateProcess(NULL, # clear out existing dist folder, ...) failed
.
make (e=2): The system cannot find the file specified.
make[1]: *** [compile_static] Error 2
make[1]: Leaving directory `C:/xampp/htdocs/oTranscribe-master'
make: *** [build_prod] Error 2
C:\xampp\htdocs\oTranscribe-master>
Please let me know what should I do further?
The instructions say that you should run
make build_prod
The makefile does not define the dist target.
Related
I am attempting to update openssl to 1.1.1 on centos 7 in order to start building OpenLDAP.
After pulling the openssl installation package and unzipping it in /usr/local/src/ I ran ./config --prefix=/usr/local/ssl --openssldir=/usr/local/ssl shared zlib. This command successfully configured openssl.
I then ran the make command to build openssl and got the following error:
cc1: fatal error: apps/app_rand.d: no such file or directory
compilation terminated
make(1): *** (apps/app.rand.o) Error 1
make(1): Leaving directory '/usr/local/src/openssl-1.1.1d'
make: *** (all) Error 2
The apps directory was created and does exist, but the app_rand.d file is not present inside of the apps directory.
I have downloaded all dependencies (i believe)
I am decent in linux, I have my rhcsa, but am not familiar with manually building software libraries like openssl. I have tried to do some research online but have not come up with any solutions. Any advice would be very much appreciated!
Just received a new GTX laptop, and for whatever reason, I am simply not able to install rJava. No matter what I do with the Java and JDK installs, I get the following message. I have been uninstalling, rebooting, re-installing, Java (latest versions) and RTools, and yet, I still cannot get rJava to install.
I am using Rstudio as my gui, and I have been able to successfully install rJava on an Ubuntu machine, but for whatever reason, I cannot get this to work on my windows GPU laptop.
I realize this is a question that appears to have been answered in other threads, but I am not seeing the same situation as mine. Something is different, and I can't figure it out.
What else can I provide to help someone help me?
* installing *source* package 'rJava' ...
** package 'rJava' successfully unpacked and MD5 sums checked
** using staged installation
Generate Windows-specific files (src/jvm-w32) ...
make: Entering directory '/Users/bfcgl/AppData/Local/Temp/RtmpOcP1l8/R.INSTALLa750514e17ed/rJava/src/jvm-w32'
C:/Rtools/mingw_64/bin/dlltool --as C:/Rtools/mingw_64/bin/as --input-def jvm64.def --kill-at --dllname jvm.dll --output-lib libjvm.dll.a
C:/Rtools/mingw_64/bin/gcc -O2 -c -o findjava.o findjava.c
C:/Rtools/mingw_64/bin/gcc -s -o findjava.exe findjava.o
make: Leaving directory '/Users/bfcgl/AppData/Local/Temp/RtmpOcP1l8/R.INSTALLa750514e17ed/rJava/src/jvm-w32'
Find Java...
JAVA_HOME=C:/PROGRA~1/Java/jdk-14
=== Building JRI ===
JAVA_HOME=C:/PROGRA~1/Java/jdk-14
R_HOME=C:/PROGRA~1/R/R-36~1.3
JDK has no javah.exe - using javac -h . instead
Creating Makefiles ...
Configuration done.
make -C src JRI.jar
make[1]: Entering directory '/Users/bfcgl/AppData/Local/Temp/RtmpOcP1l8/R.INSTALLa750514e17ed/rJava/jri/src'
C:/PROGRA~1/Java/jdk-14/bin/javac -h . -d . ../RList.java ../RBool.java ../RVector.java ../RMainLoopCallbacks.java ../RConsoleOutputStream.java ../Mutex.java ../Rengine.java ../REXP.java ../RFactor.java ../package-info.java
..\Rengine.java:120: error: invalid use of a restricted identifier 'yield'
while (!alive && !died) yield();
^
(to invoke a method called yield, qualify the yield with a receiver or type name)
1 error
make[1]: *** [Makefile.all:41: org/rosuda/JRI/Rengine.class] Error 1
make[1]: Leaving directory '/Users/bfcgl/AppData/Local/Temp/RtmpOcP1l8/R.INSTALLa750514e17ed/rJava/jri/src'
make: *** [Makefile.all:19: src/JRI.jar] Error 2
**** WARNING: JRI could NOT be built
Set IGNORE=1 if you want to build rJava anyway.
ERROR: configuration failed for package 'rJava'
* removing 'C:/Users/bfcgl/OneDrive/Documents/R/win-library/3.6/rJava'
Warning in install.packages :
installation of package ‘rJava’ had non-zero exit status
I had the same problem (although installing for the first time on an old laptop) and can confirm that JDK 11 solved the problem
I still looking for the same problem resolution, meanwhile, I tried with Java JDK 11 and I succeed in RStudio. If this helps, try it. I will keep searching for the answer why the new version is not working.
Regards,
I am trying to build the latest Linux kernel (GitHub) using a Oracel VM and a 18.04.1-Ubuntu image.
I installed the need packages and probably even more. Here is a part of the packages I installed:
sudo apt-get update
sudo apt-get install git fakeroot build-essential ncurses-dev xz-utils libssl-dev bc bison flex libelf-def kernel-package
The full list can be found here.
I ran the following commands in the linux folder after cloning the repository from GitHub.
$ cp /boot/config-$(uname -r) .config
$ make menuconfig
scripts/kconfig/mconf Kconfig
.config:1118:warning: symbol value 'm' invalid for NF_CT_PROTO_GRE
.config:1923:warning: symbol value 'm' invalid for NET_DEVLINK
.config:7865:warning: symbol value 'm' invalid for ASHMEM
.config:8724:warning: symbol value 'm' invalid for ANDROID_BINDER_IPC
.config:8725:warning: symbol value 'm' invalid for ANDROID_BINDERFS
*** End of the configuration.
*** Execute 'make' to start the build or try 'make help'.
I save and exited menuconfig. And finally make leads to the following error.
$ make -j2
Makefile:608: include/config/auto.conf: No such file or directory
Makefile:660: include/config/auto.conf.cmd: No such file or directory
HOSTCC scripts/kconfig/conf.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --syncconfig Kconfig
*** Error during sync of the configuration.
scripts/kconfig/Makefile:73: recipe for target 'syncconfig' failed
make[2]: *** [syncconfig] Error 1
Makefile:562: recipe for target 'syncconfig' failed
make[1]: *** [syncconfig] Error 2
Makefile:678: recipe for target 'include/config/auto.conf.cmd' failed
make: *** [include/config/auto.conf.cmd] Error 2
make: *** Deleting file 'include/config/auto.conf.cmd'
Looks like make is expecting some additional configuration files include/config/auto.conf. Does anyone have a clue for me.
Thanks!
Trying to compile kernel 5.6.3 as non-root, I ran into this exact problem.
Running the suggestion from Oandiy's comment
git clean -xdf
revealed that I had files in my source tree that were owned by root and could not be deleted. Looking in my history I found,
sudo make localmodconfig # DO NOT DO THIS
which had installed files, as root, in include/config/* and include/generated/autoconf.h.
To see if you have the same problem, run
sudo find . -uid 0
or just look at the error messages of git clean -xdf (there shouldn't be any).
After deleting all files and directories owned by root, I recovered from this deadlock with:
unset ARCH
cp .config ../config.backup # If you still have this.
git clean -xdf # No errors (this also deletes .config)
cp ../config.backup .config # Or generate a new one *).
make olddefconfig # Printed at the end: 'No change to .config'
Note that I needed to clear ARCH from my environment.
After this I went on as usual,
VERSION=5.6.3 # I have checked out tag v5.6.3 **)
FLAVOUR=lowlatlocxhci # Or whatever you want to call your kernel.
make -j8 deb-pkg LOCALVERSION=-$FLAVOUR
sudo dpkg -i ../linux-headers-$VERSION-${FLAVOUR}_$VERSION-$FLAVOUR-1_amd64.deb ../linux-image-$VERSION-${FLAVOUR}_$VERSION-${FLAVOUR}-1_amd64.deb
The last command fails to compile virtualbox kernel modules at the moment, but I don't care about those, and those errors can be ignored (as long as you don't use virtual box).
*) The .config used was prepared by booting to a kernel with everything (ie, a dist. kernel), copying its config from /boot to the source tree and running make localmodconfig after making sure all kernel modules that I needed where loaded (by running those applications that cause such modules to be loaded). And finally running make menuconfig to turn off CONFIG_DEBUG_INFO in this kernel and to turn a few things that are normally built into the kernel into modules as well (which I needed for some reason).
**) My git tree has been prepared with:
VERSION=5.6.3
FLAVOUR=lowlatlocxhci
git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-$VERSION-$FLAVOUR-$VERSION-$FLAVOUR
cd linux-$VERSION-$FLAVOUR-$VERSION-$FLAVOUR
git checkout -b test_$FLAVOUR v$VERSION
# Make manual changes here, and commit as usual.
I have been struggling in installing a CPAN module called Date::Calc on my windows machine having strawberry perl distribution(strawberry-perl-5.28.1.1-64bit). It does not give any error in any of the steps but ultimately I can't find that it has been installed. I have downloaded the module from CPAN org website and followed the steps like unzip, perl Makefile.pl, make, make test, and make installs. Please help what am I missing or where am I going wrong?
I followed following steps:
Strawberry perl(5.28.1.1-64-bit) is already installed on my machine(I installed it a month back). That is running fine.
Set PATH variable to point to perl/bin folder where the bin folder exist. First, I tried command cpan Date::Calc. It gave me errors like timeout while fetching the required files. I suspect this to be an issue with my client IT/proxy infrastructure:
C:\SummitTools6.1\CPANModules>cpan Date::Calc
Loading internal logger. Log::Log4perl recommended for better logging
CPAN: CPAN::SQLite loaded ok (v0.212)
CPAN: LWP::UserAgent loaded ok (v6.36)
Fetching with LWP:
http://cpan.strawberryperl.com/authors/01mailrc.txt.gz
LWP failed with code[500] message[Can't connect to cpan.strawberryperl.com:80 (A connection attempt
failed because the connected party did not properly respond after a period of time, or established c
onnection failed because connected host has failed to respond.)]
Warning: no success downloading 'C:\SummitTools6.1\perl\cpan\sources\authors\01mailrc.txt.gz.tmp12016'. Giving up on it.
Fetching with LWP:
http://www.cpan.org/authors/01mailrc.txt.gz
LWP failed with code[500] message[Can't connect to www.cpan.org:80 (Invalid argument)]
Warning: no success downloading 'C:\SummitTools6.1\perl\cpan\sources\authors\01mailrc.txt.gz.tmp12016'. Giving up on it.
Fetching with LWP:
http://www.cpan.org/authors/01mailrc.txt.gz
Then I tried manually downloading the tar.gz file of the module I am interested in from metacpan.org.
Copied the file to a separate location than the strawberry perl installation.
gzip zxvf Date-Calc-6.4.tar.gz
cd Date-Calc-6.4
perl Makefile.pl
make
make test
make install
All steps ran fine but what is surprising is the last three steps as they finished in split second and printed just three lines in stdout.
make[13]: Entering directory '/cygdrive/c/SummitTools6.1/CPANModules/Date-Calc-6.4'
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\SummitTools6.1\CPANModules\Date-Calc-6.4>C:\SummitTools6.1\CPANModules\Date-Calc-6.4>
Also to be noted that if I run
make >> 1.txt
in order to capture it's output in a text file, it hangs in dos shell. However, meanwhile I can open the text file which shows the same content as pasted above in italics(same as being shown in standard output on terminal earlier if I do not rerout to a text file).
As it is hung, If I interrupt Ctrl+C, it shows a couple of lines like below:
C:\SummitTools6.1\CPANModules\Bit-Vector-7.4>make
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\SummitTools6.1\CPANModules\Bit-Vector-7.4>
C:\SummitTools6.1\CPANModules\Bit-Vector-7.4>make >> 1.txt
make[1]: *** [blib\lib\Bit/.exists] Interrupt
C:\SummitTools6.1\CPANModules\Bit-Vector-7.4>Makefile:393: recipe for target 'blib\lib\Bit/.exists'
failed
make: *** [blib\lib\Bit/.exists] Interrupt
C:\SummitTools6.1\CPANModules\Bit-Vector-7.4>
As Date::Calc is dependent upon Bit::Vector module, I had to run all the same steps for Bit::Vector first followed by Date::Calc. But Got the same issues/errors/no errors for both the modules.
I was able to build the most recent version of QScintilla (2.9.1) on Ubuntu 15.10. I have tried building the same version on Windows 10 using Qt 5.6. QMake run to completion without giving errors. A call to Make gives the following error message:
make -f Makefile.Release
make[1]: Entering directory 'G:/Sources/QScintilla/QScintilla_gpl-2.9.2/Qt4Qt5'
Makefile.Release:822: *** missing separator. Stop.
make[1]: Leaving directory 'G:/Sources/QScintilla/QScintilla_gpl-2.9.2/Qt4Qt5'
makefile:34: recipe for target 'release' failed
make: *** [release] Error 2
What am I doing wrong? How can I solve it?
I ran into similar issues. I eventually got a working 'QScintilla' on my Windows 10 machine as described below.
My PC has the following specifications:
Windows 10, 64-bit OS
Anaconda package installed (Python 3.5)
PyQt5 installed (download the .exe installer from https://www.riverbankcomputing.com/software/pyqt/download5)
STEP 1:
Download the file QScintilla-2.9.2-cp35-none-win_amd64.whl from the site https://pypi.python.org/pypi/QScintilla .
Put the file in the folder:
C: \ .. \ Anaconda \ Scripts \
We will use this .whl file to do the installation of QScintilla.
_
STEP 2:
Open the Windows cmd tool with Administrator privileges! Now type the following command:
> cd "C:\..\Anaconda\Scripts"
This brings the cmd shell to the right spot. Now type the following command:
> pip3 install QScintilla
If all goes well, you get the following message:
> pip3 install QScintilla
Collecting QScintilla
Downloading QScintilla-2.9.2-cp35-none-win_amd64.whl (1.6MB)
100% |################################| 1.6MB 984kB/s
Collecting PyQt5 (from QScintilla)
Downloading PyQt5-5.6-cp35-none-win_amd64.whl (74.7MB)
100% |################################| 74.7MB 23kB/s
Collecting sip (from PyQt5->QScintilla)
Downloading sip-4.18-cp35-none-win_amd64.whl (46kB)
100% |################################| 51kB 5.7MB/s
Installing collected packages: sip, PyQt5, QScintilla
..
Successfully installed PyQt5-5.6 QScintilla-2.9.2 sip-4.18
_
STEP 3:
I did not get the message "Successfully installed" from the first shot. Instead I got the following error message:
PermissionError: [Errno 13] Permission denied: 'C:\..\anaconda\Lib\site-packages\sip.pyd'
Apparently the file sip.pyd sitting in the directory C:\..\anaconda\Lib\site-packages could not be accessed. So I opened another Windows command shell (of course again with Administrator privileges!) and typed the following command:
> icacls "C:\..\Anaconda\Lib\site-packages" /grant "Administrators":(OI)(CI)F /T
This command will give full access rights (read - modify and write) to all "Administrator" users for all the files in the site-packages folder, and all the files in its subfolders. While this command executes, you should get the following messages:
...
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\readline.cpython-35.pyc
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\simplegeneric.cpython-35.pyc
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\six.cpython-35.pyc
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\test_path.cpython-35.pyc
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\test_pycosat.cpython-35.pyc
...
Successfully processed 38589 files; Failed processing 0 files
Now you can repeat STEP 2, and it should work!