I am attempting to update openssl to 1.1.1 on centos 7 in order to start building OpenLDAP.
After pulling the openssl installation package and unzipping it in /usr/local/src/ I ran ./config --prefix=/usr/local/ssl --openssldir=/usr/local/ssl shared zlib. This command successfully configured openssl.
I then ran the make command to build openssl and got the following error:
cc1: fatal error: apps/app_rand.d: no such file or directory
compilation terminated
make(1): *** (apps/app.rand.o) Error 1
make(1): Leaving directory '/usr/local/src/openssl-1.1.1d'
make: *** (all) Error 2
The apps directory was created and does exist, but the app_rand.d file is not present inside of the apps directory.
I have downloaded all dependencies (i believe)
I am decent in linux, I have my rhcsa, but am not familiar with manually building software libraries like openssl. I have tried to do some research online but have not come up with any solutions. Any advice would be very much appreciated!
Related
I've recently replaced Win10 by Linux Debian 11.2 on my PC (hence I'm a newbee in Linux). Now, not all programs are available as deb-Files.
I tried to compile source code - here a synthesizer ams-2.2.0 - from a tar.gz files (after unzipping into a separate folder) with steps (as written in the INSTALL.TXT to this source, and obviously usual)
./configure
make
make install
I get a bunch of error messages for missing files, when running ./congigure most resolved by installation of missing packages, but at last it fails with error message:
checking for QTCore Qt5Gui Qt5Widgets >= 5.0... no
configure: error: cannot find Qt5 library >= 5.0
(hope to get all written correctly, because I can't copy from the terminal ... Ctrl-Shift-C doesn't seem to work)
I checked the installation in synaptics and found that Qt-Version is 5.12. So what's wrong here?
I'm afraid to have this error message everytime I try to compile different source codes.
You need to install libqtcore and libqtwidgets with development headers, they are in qtbase5-dev package.
sudo apt install build-essential qtbase5-dev qtchooser
I am trying to install omni compiler in order to compile XcalableMP programs on OSX. I can ./configure successfully as per the instructions but am receiving this error when I make:
../include/xmp_internal.h:19:10: fatal error: mpi.h: No such file or directory
My Open MPI is installed via homebrew and mpi.h is located through my Cellar folder. How do I go about including this header file?
can you try the following command to be sure the location of the installed openmpi is correct:
mpicc -showme
Then, are you sure the mpi path is in your path, try to set these environment variables and then try:
Note that I assume the openmpi is installed in "/home/openmpi" path for example:
export PATH=/home/opempi/bin:/home/opempi/include:$PATH
and for the runtime:
export LD_LIBRARY_PATH=/home/openmpi/lib:$LD_LIBRARY_PATH
Then try to configure and make again the omnicomppiler,
Just received a new GTX laptop, and for whatever reason, I am simply not able to install rJava. No matter what I do with the Java and JDK installs, I get the following message. I have been uninstalling, rebooting, re-installing, Java (latest versions) and RTools, and yet, I still cannot get rJava to install.
I am using Rstudio as my gui, and I have been able to successfully install rJava on an Ubuntu machine, but for whatever reason, I cannot get this to work on my windows GPU laptop.
I realize this is a question that appears to have been answered in other threads, but I am not seeing the same situation as mine. Something is different, and I can't figure it out.
What else can I provide to help someone help me?
* installing *source* package 'rJava' ...
** package 'rJava' successfully unpacked and MD5 sums checked
** using staged installation
Generate Windows-specific files (src/jvm-w32) ...
make: Entering directory '/Users/bfcgl/AppData/Local/Temp/RtmpOcP1l8/R.INSTALLa750514e17ed/rJava/src/jvm-w32'
C:/Rtools/mingw_64/bin/dlltool --as C:/Rtools/mingw_64/bin/as --input-def jvm64.def --kill-at --dllname jvm.dll --output-lib libjvm.dll.a
C:/Rtools/mingw_64/bin/gcc -O2 -c -o findjava.o findjava.c
C:/Rtools/mingw_64/bin/gcc -s -o findjava.exe findjava.o
make: Leaving directory '/Users/bfcgl/AppData/Local/Temp/RtmpOcP1l8/R.INSTALLa750514e17ed/rJava/src/jvm-w32'
Find Java...
JAVA_HOME=C:/PROGRA~1/Java/jdk-14
=== Building JRI ===
JAVA_HOME=C:/PROGRA~1/Java/jdk-14
R_HOME=C:/PROGRA~1/R/R-36~1.3
JDK has no javah.exe - using javac -h . instead
Creating Makefiles ...
Configuration done.
make -C src JRI.jar
make[1]: Entering directory '/Users/bfcgl/AppData/Local/Temp/RtmpOcP1l8/R.INSTALLa750514e17ed/rJava/jri/src'
C:/PROGRA~1/Java/jdk-14/bin/javac -h . -d . ../RList.java ../RBool.java ../RVector.java ../RMainLoopCallbacks.java ../RConsoleOutputStream.java ../Mutex.java ../Rengine.java ../REXP.java ../RFactor.java ../package-info.java
..\Rengine.java:120: error: invalid use of a restricted identifier 'yield'
while (!alive && !died) yield();
^
(to invoke a method called yield, qualify the yield with a receiver or type name)
1 error
make[1]: *** [Makefile.all:41: org/rosuda/JRI/Rengine.class] Error 1
make[1]: Leaving directory '/Users/bfcgl/AppData/Local/Temp/RtmpOcP1l8/R.INSTALLa750514e17ed/rJava/jri/src'
make: *** [Makefile.all:19: src/JRI.jar] Error 2
**** WARNING: JRI could NOT be built
Set IGNORE=1 if you want to build rJava anyway.
ERROR: configuration failed for package 'rJava'
* removing 'C:/Users/bfcgl/OneDrive/Documents/R/win-library/3.6/rJava'
Warning in install.packages :
installation of package ‘rJava’ had non-zero exit status
I had the same problem (although installing for the first time on an old laptop) and can confirm that JDK 11 solved the problem
I still looking for the same problem resolution, meanwhile, I tried with Java JDK 11 and I succeed in RStudio. If this helps, try it. I will keep searching for the answer why the new version is not working.
Regards,
When I try to create a new rails project on my PowerPC Mac OS X with ruby-2.4.2 and rails-5.1, it started to download and install various gems and during the build step of nokogiri-1.10 I got
cc1: error: unrecognized command line option "-Wno-array-bounds"
during the compilation of libxml2.9.9. I modified the
~/.chefdk/gem/ruby/2.1.0/gems/nokogiri-1.10.1/ext/nokogiri/tmp/powerpc-apple-darwin9.8.0/ports/libxml2/2.9.9/libxml2-2.9.9/Makefile
to comment out the error causing -Wno-array-bounds option and remade the project but it gave the same error again. I guess it's reverting back the original Makefile. How can I install nokogiri with a modified Makefile?
I'm trying to compile miniSAT on Kali Linux 64 bits but I keep getting the error message:
fatal error: zlib.h: no such file or directory
I have read that there might be a linking problem that makes the compiler unable to find the header files, but I'm new to Linux and do not know how to solve that.
You should install the development support files for zlib, try:
sudo apt-get install libz-dev
Other package names: zlib1g-dev.
If you've already zlib library, make sure you're compiling your code sources with -lz. See: missing zlib.h in ubuntu.
Install zlib from it's source, solve my similar error.
Download last version from this then:
configure
make -j4
make install