I've a neo4j instance installed using community AMI and it keeps complaining with below error, even though I've configured Bolt accept non-local connections i.e. dbms.connector.bolt.address=0.0.0.0:7687
Caused by: java.net.URISyntaxException: Expected hostname at index 7: bolt://:7687
at java.net.URI$Parser.fail(URI.java:2848)
at java.net.URI$Parser.failExpecting(URI.java:2854)
at java.net.URI$Parser.parseHostname(URI.java:3390)
at java.net.URI$Parser.parseServer(URI.java:3236)
at java.net.URI$Parser.parseAuthority(URI.java:3155)
at java.net.URI$Parser.parseHierarchical(URI.java:3097)
at java.net.URI$Parser.parse(URI.java:3053)
at java.net.URI.<init>(URI.java:673)
at org.neo4j.server.rest.discovery.DiscoverableURIs$Builder.add(DiscoverableURIs.java:128)
... 15 more
I've installed following version
AWS AMI id : ami-0118d82e9da26d491
Neo4j version: 3.5.3
Is this a known issue, thanks in advance
Related
I initially installed 7.16.0 elastisearch and later updated it to 7.16.2.
Now i am downgrading it back to 7.16.0. But i keep getting the below error whenever I run the docker image.
ERROR: [1] bootstrap checks failed. You must address the points described in the following [1] lines before starting Elasticsearch.
bootstrap check failure [1] of [1]: the default discovery settings are unsuitable for production use; at least one of [discovery.seed_hosts, discovery.seed_providers, cluster.initial_master_nodes] must be configured
All the solutions for this error points to Linux OS but I am working on Windows OS.
Could anyone please help me resolve this?
Hello I have started to learn Apache Flink. I have tried to install Flink version 1.7.2 in my Macosx 10.14.3 and for checking purpose, i started local cluster mode by writing start-cluster.sh from my cmd by the reference of flink doc.when I have opened Dispatcher’s web frontend at http://localhost:8081 in my browser it shows 403 forbidden error. I have gone through the Flink log file and I have found
Caused by: org.apache.flink.util.FlinkException: Could not create the DispatcherResourceManagerComponent.
Caused by: java.net.BindException: Address already in use
Here is my screenshot of my log file . kindly help me to solve this problem . I am running java 1.8
From reference of Jira, It was bug in version 1.7 but It is now resolved in 1.7.2 . The Dispatcher frontend is working after changing rest port value into 8089(since 8081 very common port the default value might conflict ) in flink-conf.yml .
http://www.alternatestack.com/development/apache-flink-change-port-for-web-front-end/
I have attempted to upgrade our SonarQube instance from 4.5.7 LTS to 5.6.5 LTS. I followed the provided SonarQube upgrade documentation. After browsing to [sonarserver]:9000/setup and ran the DB Upgrade. The upgrade ran a little over 2 hours and came back with this message:
Upgrade Failed
Database connection cannot be established. Please check database status and JDBC settings.
When viewing the log, I see this error:
2017.02.16 13:18:43 ERROR web[o.s.s.d.m.DatabaseMigrator] Fail to execute database migration: org.sonar.db.version.v50.FeedFileSources
java.lang.IllegalStateException: Error during processing of row: [uuid=AVpHrbhU29-XDi5QdhtN,uuid=AVpHrbk629-XDi5Qdh0r,data=using System;
I have copied the entire db upgrade log here: http://pastebin.com/p9CkYhrU
I also tried to restart SonarQube and attempt the db upgrade again, but it ran for 5-10 mins and reported the same result.
Additional Details:
Current SonarQube: 4.5.7 LTS
New SonarQube: 5.6.5 LTS
DB: MySQL 5.7.17
Operating System: Windows Server 2012 R2
After the unsuccessful upgrade, we reverted back to 4.5.7 successfully.
We also previously upgraded from 4.3.1 to 4.5.7 LTS. During this upgrade, we moved our SonarQube database from MySQL 5.5 to 5.7.17 and then upgraded SonarQube to 4.5.7 LTS. The upgrade step for this ran two hours and completed successfully.
Thank you for any assistance,
-Eddie
UPDATE 2/21/17
I stood up a test instance for this SonarQube upgrade on a different server. I installed MySQL 5.7 and SonarQube 4.5.7 LTS using the same backup data. During the upgrade to SonarQube 5.6.5 LTS, I received the same error as before. So I knew at this point that I could duplicate the error. I decided to look at that error message again and found these a bit further down:
Caused by: java.sql.BatchUpdateException: Packet for query is too large (6371233 > 4194304). You can change this value on the server by setting the max_allowed_packet' variable.
Caused by: com.mysql.jdbc.PacketTooBigException: Packet for query is too large (6371233 > 4194304). You can change this value on the server by setting the `max_allowed_packet` variable.
So I went ahead and edited the max_allowed_packet variable in my.ini. First I changed it from 4M to 8M and received a similar error. Next, I changed the variable to 16M and the upgrade got past the error!
Unfortunately, the DB Upgrade ran for 11 more hours and came back with another error:
2017.02.21 02:48:13 ERROR web[o.s.s.d.m.DatabaseMigrator] Fail to execute database migration: org.sonar.db.version.v564.CleanUsurperRootComponents
java.lang.IllegalStateException: Error during processing of row: [id=62566,uuid=AVpc2I0gt4GsKrhSYYYQ]
Caused by: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Application was streaming results when the connection failed. Consider raising value of 'net_write_timeout' on the server.
Caused by: java.net.SocketException: Connection reset
I increased the net_read_timeout in mysql from 60 to 1200. set net_write_timeout = 1200; I restarted SonarQube, ran the DB Upgrade again, and got past the error. The upgrade continued running and I received another error:
2017.02.21 09:57:05 ERROR web[o.s.s.d.m.PlatformDatabaseMigration] DB Migration or container restart failed. Process ended with an exception java.lang.IllegalStateException: Fail to load plugin Clirr [clirr]
Caused by: java.lang.NoClassDefFoundError: org/sonar/api/batch/maven/DependsUponMavenPlugin
Caused by: java.lang.ClassNotFoundException: org.sonar.api.batch.maven.DependsUponMavenPlugin
Looks like a plugin error, so I went ahead and looked into that individual plugin. I found some information about the Clirr plugin being deprecated, so I removed it from the Plugins folder, restarted SonarQube, and got hit with another plugin error (different plugin). I got 6 or 7 of these errors and was able to fix them by either removing or replacing the .jar in the Plugins folder with the newer compatible version.
So after fixing the Java plugin, I restarted SonarQube and it started up fine! I am now running SonarQube 5.6.5 LTS on my sandbox server. The next step will be for me to revert back to 4.5.7 LTS and try the upgrade again to be sure I will have a successful production upgrade in the future.
I am facing problems with Elasticsearch.
I am unable to get the results. I checked in log files i got the following error:
ERROR:
2014-10-30 08:52:46,971][DEBUG][action.search.type ] [Lianda] [135] Failed to execute fetch phase
[Error: Runtime.getRuntime().exec("cd").getInputStream(): Cannot run program "cd": java.io.IOException: error=2, No such file or directory]
[Near : {... w InputStreamReader(Runtime.getRuntime().exec("cd" ....}]
Below are the version I am using:
elastic search version: 0.90.5
java version: 1.6.0_33 64 bit
plugin installed: phonetic
The strange thing is that, whenever I am getting this error, I restart the elastic search server and its works.
So I think something is getting overloaded.
Based on seeing the Runtime.getRuntime().exec() call, it could be related to a dynamic scripting vulnerability in the defaults of elastic search prior to version 1.2. See this document on scripting security.
If that is the source of your problem, you can put in a fix in your current version (or upgrade to a newer version). From the link above:
If you are running an Elasticsearch node prior to the 1.2.x release,
you can make this change on your system by putting the following
setting into elasticsearch.yml:
script.disable_dynamic: true
Then restart each node in your cluster. Dynamic scripting will now be
disabled. If you are running Elasticsearch 1.2.x or later, dynamic
scripting is already disabled by default.
I have created a neo4j database on my windows machine.
I have transferred the content of the database directory to my linux machine. This is because I have the community edition which does not support the backup functions.
mtt#mttPC:/var/lib/neo4j/data/log$ sudo service neo4j-service start
WARNING: Max 1024 open files allowed, minimum of 40 000 recommended. See the Neo4j manual.
WARNING! You are using an unsupported Java runtime.
* Please use Oracle(R) Java(TM) 7 to run Neo4j Server. Download "Java Platform (JDK) 7" from:
http://www.oracle.com/technetwork/java/javase/downloads/index.html
* Please see http://docs.neo4j.org/ for Neo4j Server installation instructions.
Using additional JVM arguments: -server -XX:+DisableExplicitGC -Dorg.neo4j.server.properties=conf/neo4j-server.properties -Djava.util.logging.config.file=conf/logging.properties -Dlog4j.configuration=file:conf/log4j.properties -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled
Starting Neo4j Server...WARNING: not changing user
process [21498]... waiting for server to be ready..... Failed to start within 120 seconds.
Neo4j Server may have failed to start, please check the logs.
The file messages.log in the database directory says nothing.
Any idea? Are the windows and linux neo4js compatible? Thank you.
Edit
I have made a fresh install of neo4j on my ubuntu machine.
Now I finally get some logs:
2014-05-16 20:01:10.958+0000 ERROR [o.n.k.EmbeddedGraphDatabase]: Startup failed: Component 'org.neo4j.kernel.impl.transaction.XaDataSourceManager#25984c63' was successfully initialized, but failed to start. Please see attached cause exception.: Component 'org.neo4j.kernel.impl.nioneo.xa.NeoStoreXaDataSource#3d34dcb' was successfully initialized, but failed to start. Please see attached cause exception.: 'neostore' has a store version number that we cannot upgrade from. Expected 'NeoStore v0.A.0' but file is version 'NeoStore v0.A.2'.
2014-05-16 20:01:10.958+0000 INFO [o.n.k.EmbeddedGraphDatabase]: Shutdown started
I should be related to this but I am not sure how to proceed. Is the issue related to the fact that when I copied the database, I just stopped neo4j on my windows machine from the neo4j window?
There is no reason why a Neo4j database should not be transferable between operating systems. Can you please provide the output of data/log/console.log? First thought is that you may have permission issues. The files should be read/write for the user the Neo4j process will run as.