I have create a test plan setting no. of threads= 1 ramp-up period= 1 and loop count = 1
If i want to verify throughput value of 2nd label i am using this formula 2/5 means (no.of samples / average time) which results in 0.4 ms but the value in jmeter is showing as 4.9/min. And how are the last two rows of summary report are calculating which include labels of Test(it is my transaction controller) and Total. Please explain with formula. The image of my summary report is in the given link.
summary report
You're using the wrong formula, according to JMeter Glossary
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
So you should be dividing the number of requests not by average response time, but by the whole duration of the test.
If you want to exclude some Samplers which are "not interesting" using Filter Results Tool where you can specify the label(s) of the sampler(s) you would like to get metrics for.
Filter Results Tool can be installed using JMeter Plugins Manager
Related
Summary Report
I have set a thread of 1500 with a ramp up period of 100, Could any one please tell me how should i verify the report generated by Jmeter.
Calculation of Average, Standard deviation and throughput.
If you want the formulas - they're all available in the Calculator class.
Average response time: is basically a sum of all Sample Results elapsed time divided by their number, in other words arithmetic mean
Standard Deviation: is normal statistical measurement of result set values distribution
Throughput: is number of requests divided by total test duration
It is not clear what you mean by "verify", if you want to fail certain samplers if their response time exceeds certain threshold values you can use Duration Assertion or define reasonable timeouts using HTTP Request Defaults
If you want to process calculated values like mark test as failed if average response time is greater than X milliseconds or throughput is lower than Y requests for the specified duration or standard deviation for full response time is greater than Z milliseconds unfortunately as of JMeter 5.1.1 it is not possible out of the box, however you can consider using Taurus tool as a wrapper for your JMeter test, Taurus is capable of "understanding" JMeter tests and you can add custom pass/fail criteria including but not limited to the metrics you listed.
I received an requirement were I need to display the response time, number of threads running, latency and throughput in one report. I used below code in Beanshell post processor to display throughput, response time and number of threads:
long repons=prev.getTime();
vars.put("responseTime",String.valueOf(recons));
//print("res" +responseTime);
log.info("Response time" + repons);
long thread=prev.getAllThreads();
vars.put("threads", Integer.toString(prev.getAllThreads()));
log.info("Thread number is"+thread);
float throughput=thread/repons;
log.info("Through put"+throughput);
I guess it is wrong. Can anyone help on this?
You have syntax error in your script, you have repons in the first line and recons in the second, they should be the same
It is better to use JSR223 Elements and Groovy language for scripting.
And finally, your approach is wrong, according to JMeter glossary:
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
So you need to divide total number of requests by total time taken to
execute these requests, your "code" most likely will be returning zero throughput
You can consider the following workarounds:
Use Backend Listener and a 3rd-party visualisation tool, see Real-time results article for details.
Run your JMeter test via Taurus framework which has Interactive Reporting feature
I ran a Jmeter script with all the samples under a transaction controller as shown in below image
Then when I got the summary report for this test and found in the report under average column that the transaction controller shows the total of all average time of samples.
Question 1: Why does transaction controller show as a sample as well?
Question 2: (Check below summary report image) Isn't the total average supposed to be 7608/17 (where transaction controller average is 7608 and number of samples is 17) if you see the summary report below you can see the average time shown is double the value. 7608/17*2 = 895. Can you please explain the reason for doubling it.
Similarly when I ran the test for 20 users the average was 895 which I think arrived in the form 7608/340*40= 895 (Transaction controller average time= 7608, Number of samples = 340) There too I don't understand why the value 40 (which is double the number of users) is multiplied. Please Explain Thank you
This is the whole idea of the Transaction Controller - to measure cumulative duration of all the samplers in its scope so measure the time it takes for them all to complete
This is not the average, this is the sum.
See Using JMeter's Transaction Controller article for comprehensive information on using the Transaction Controller.
I want to test the capacity of the web app that can handle without break.how to get the average requests per second from the aggregate report.
Is throughput is equal to average requests per second ?
I don't really need Apache definition.please make it simple.
Number of threads : 25
ramp-up :1
Loop:10
I have 3 slaves.
samples:250
Avg:1594
Throughput:10.4
Your question contains the answer: Throughput:10.4
According to JMeter Glossary:
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
So my assumption is that you generate the load of 10 requests per second (it may be per minute however, I need to know how long did your 250 samples execute to tell for sure)
If you're interested in "requests per second over time" you can utilize Server Hits Per Second listener which is available via JMeter Plugins project.
Alternative option of visualizing your load test results is using Loadosophia.org cloud where you can upload your test result and see graphs, distributions, export load test report as PDF, etc.
I would like to understand the Jmeter output for in depth.
I am confused with the 'throughput rate' concept.Does it mean that the server can only handle 48.1 requests/min at the given load or does it mean something else .What is the difference between the total throughput rate and the throughput rate shown by individual requests.In my case there 8 requests sent and the individual request shows throughput rate as 6.1/min.Please explain.
I need to suggest any changes to server side/explain the jmeter report,Please suggest how i can explain what needs to be done.
The total summary report is as below:
Total Users:100
Ramp up time:1000s
Total Samples : 800
Min:325
Max:20353
Std.Dev: 4524.91
Throughput:48.1/min
Error: 0.38%
Thanks in advance.
As per JMeter Glossary
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
So you providing the "load" of 0.8 requests per second which is quite low.
JMeter provides a test element which controls this "Throughput" value so you can choose whether you will be simulating "N" concurrent users or sending "N" requests per second. Take a look at How to use JMeter's Throughput Constant Timer guide for more details on goal-oriented load test scenario implementation with JMeter.