I want to test the capacity of the web app that can handle without break.how to get the average requests per second from the aggregate report.
Is throughput is equal to average requests per second ?
I don't really need Apache definition.please make it simple.
Number of threads : 25
ramp-up :1
Loop:10
I have 3 slaves.
samples:250
Avg:1594
Throughput:10.4
Your question contains the answer: Throughput:10.4
According to JMeter Glossary:
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
So my assumption is that you generate the load of 10 requests per second (it may be per minute however, I need to know how long did your 250 samples execute to tell for sure)
If you're interested in "requests per second over time" you can utilize Server Hits Per Second listener which is available via JMeter Plugins project.
Alternative option of visualizing your load test results is using Loadosophia.org cloud where you can upload your test result and see graphs, distributions, export load test report as PDF, etc.
Related
I am in confusion here for what is the right parameter to find how many requests my service can handle in a sec..
Eg: According to docs & this post TPS(transactions/sec) is calculated based on elapsed time of the request which seems to be fair when you have one service instance. Eg: My elapsed time is 1 second so my tps is 1 which makes sense, but the calculations fail when i have 3 service instance(H-Scaled) though the elapsed time remains the same but now i can process 3 concurrent requests in that same second which should ideally read back as 3 tps but it doesnt
Q:Then what is the right parameter in jmeter report to check for this ? or is my theory wrong?
As per JMeter Glossary:
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
And request is something produced by JMeter's Sampler
If you're doing some scalability testing you can measure it as follows:
Run a stress test with 1 service instance, i.e. start with 1 user and gradually increase the load at the same time looking at TPS. At some point you will reach the stage where increasing the number of users won't result in increased TPS due to some bottleneck. Measure the number of users and the TPS just before the bottleneck hits you.
Re-run your test with 3 service instances, you should see that the number of users and TPS before the bottleneck is higher now.
I received an requirement were I need to display the response time, number of threads running, latency and throughput in one report. I used below code in Beanshell post processor to display throughput, response time and number of threads:
long repons=prev.getTime();
vars.put("responseTime",String.valueOf(recons));
//print("res" +responseTime);
log.info("Response time" + repons);
long thread=prev.getAllThreads();
vars.put("threads", Integer.toString(prev.getAllThreads()));
log.info("Thread number is"+thread);
float throughput=thread/repons;
log.info("Through put"+throughput);
I guess it is wrong. Can anyone help on this?
You have syntax error in your script, you have repons in the first line and recons in the second, they should be the same
It is better to use JSR223 Elements and Groovy language for scripting.
And finally, your approach is wrong, according to JMeter glossary:
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
So you need to divide total number of requests by total time taken to
execute these requests, your "code" most likely will be returning zero throughput
You can consider the following workarounds:
Use Backend Listener and a 3rd-party visualisation tool, see Real-time results article for details.
Run your JMeter test via Taurus framework which has Interactive Reporting feature
I have a JMeter test plan using which I am running 10 - 500 threads. Each thread submits a job. I am basically collecting results like 10 jobs and measure the latency of each job. I know summary report gives a nice report on throughput, but that report is not suitable for my test because my test plan has 1 POST plus 11 GET calls in it and the summary report gives throughout of each those calls. But I need to measure throughput for each 10 threads, 50 and 100 threads respectively. Could someone let me know how should I go this in JMeter or do I have to calculate manually? Note: I'm allowing 10sec ramp up time for 10 threads.
You are right: summary report gives you throughput for each call. To measure multiple calls at once, add them under Transaction controller. For example, say you want to measure overall throughput of all GETs at once, put them all under Transaction controller, but not the POST request, so summary graph will contain measurement for each of the GET requests, plus separate line which includes all of them at once.
Another (non-interactive) option is to save results as CSV file, including label and latency, and calculate throughput using Excel (or awk) from the file.
To measure for different number of users, you need to run test multiple times with that number of concurrent threads/users.
When i carryout load testing in jmeter i have list of samples. Each sample returns its own throughput. However in the aggregated graph or summary result it has a total row at the bottom and adds all the throughput. What does this signify?
Can i just use the total throughput as the total throughput of the entire test run. Why does summary report adds up all the sample throughput rather than showing the average throughput?
In the following picture i ran load test with 2 user and 2 ramp up time.
As shown above the total actually sums up the throughput rather than aggregating it.
However, when i carry out test with 1 user and 1 ramp up time then it aggregates the throughput and displays the average throughput of the samplers.
In the below figure i carried out test with 1 thread and 1 ramp up time.
IS this a bug?
No, It's not a bug!!!
The Throughput is the number of requests per unit of time (seconds, minutes, hours) that are sent to your server during the test.
The Throughput is the real load processed by your server (Application under test) during a run but it does not tell you anything about the performance of your server during this same run.
As per JMeter Glossary:
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
So, In your case For 2 User : The application handled 10.7 requests/second.
And For the Single user : The Application handled 22.9 requests/second.
Its not sums up here, If you see in your screenshot the sum is coming around 14.4/sec, Sot its not sum of all throughput. Its calculated value based on the load you had given and your application would support mentioned throughput.
In your case if a user accesses the application it supports 22.9 requests per sec. But when two users access the application then it supports 10.7 requests per sec.
Please look at here for more info about Jmeter throughput
Jmeter aggregate report total throughput - how is calculated
In case of performance testing, average is something we all avoid.
Going back to actual question. Consider you have 5 requests in one workflow. You are running this test for 50 iterations. So making 250 requests during the load test.
Now you want to analyze individual request performance as well as overall system performance. In this case, when you want to drill down and look at individual request in order to find bottlenecks, you look at the throughput and response time of request.
If you want to find the overall load your system can handle, look at the total throughput.
I would like to understand the Jmeter output for in depth.
I am confused with the 'throughput rate' concept.Does it mean that the server can only handle 48.1 requests/min at the given load or does it mean something else .What is the difference between the total throughput rate and the throughput rate shown by individual requests.In my case there 8 requests sent and the individual request shows throughput rate as 6.1/min.Please explain.
I need to suggest any changes to server side/explain the jmeter report,Please suggest how i can explain what needs to be done.
The total summary report is as below:
Total Users:100
Ramp up time:1000s
Total Samples : 800
Min:325
Max:20353
Std.Dev: 4524.91
Throughput:48.1/min
Error: 0.38%
Thanks in advance.
As per JMeter Glossary
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
So you providing the "load" of 0.8 requests per second which is quite low.
JMeter provides a test element which controls this "Throughput" value so you can choose whether you will be simulating "N" concurrent users or sending "N" requests per second. Take a look at How to use JMeter's Throughput Constant Timer guide for more details on goal-oriented load test scenario implementation with JMeter.