I am trying to start sonarqube server on Mac.
Followed the steps mentioned at Get Started in Two Minutes Guide.
Got access issue which was fixed by Access Issue.
Update 1 : Extracted the zip file in Downloads folder (tried 7.0 and 8.0 version of sonar qube).
Again when tried following command in mentioned directory.
sh sonar.sh console
Got following error
Running SonarQube...
wrapper | --> Wrapper Started as Console
wrapper | Launching a JVM...
wrapper | JVM exited while loading the application.
jvm 1 | Error: Could not find or load main class org.tanukisoftware.wrapper.WrapperSimpleApp
wrapper | JVM Restarts disabled. Shutting down.
wrapper | <-- Wrapper Stopped
Go to System Preferences -> Security & Privacy General tab after running your code. Then allow anyway and try again. You will see open button on the modal.
go to conf (cd sonarqube-8.0\ 2/conf)
edit your ( vi wrapper.conf)
change the java path to JDK (your local java path)- wrapper.java.command=/usr/bin/java (local path of java)
try to start the sonar by using ./sonar.sh start
if it fails please go to logs folder which is one level down to bin(cd ..) and share the logs from sonar.log and es.log
Also, check web.log
In my case, I had to change the port because port 9000 was already in use.
Also, I had to use Java 11 instead of Java 8
Related
I am following the getting started guide in the URL below
http://hyperledger-fabric.readthedocs.io/en/latest/
I installed all prerequisites.
Using windows 10.
After installation of prerequisites I move to next section “Write your First Application” URL given below
http://hyperledger-fabric.readthedocs.io/en/latest/write_first_app.html
After download “fabric-sample” from git when I try “startFabric.sh” script in “fabcar” subdirectory for launch the network I am encountering an error are show below.
UTC [main] main -> ERRO 001 Cannot run peer because cannot init crypto, missing /etc/hyperledger/fabric/C:/Program Files/Git/etc/hyperledger/msp/users/Admin#org1.example.com/msp folder
If you look at the path of the missing file you'll see it is malformed. It was resolved by issuing an export command before running the startFabric.sh script:
export MSYS_NO_PATHCONV=1
./startFabric.sh
See https://jira.hyperledger.org/browse/FAB-5392?page=com.atlassian.jira.plugin.system.issuetabpanels%3Aall-tabpanel.
Thanks Tim & Gari
I am facing strange issue with sonarqube 5.0.1 , one one of the machine it is not starting. Here is the error log - sonar.log -
--> Wrapper Started as Daemon
Launching a JVM...
Unable to start JVM: No such file or directory (2)
JVM exited while loading the application.
JVM Restarts disabled. Shutting down.
<-- Wrapper Stopped
Machine is x86_64 GNU/Linux - Centos 5.1.
this box has java installed -
$java -version
java version "1.6.0_45"
Java(TM) SE Runtime Environment (build 1.6.0_45-b06)
Java HotSpot(TM) 64-Bit Server VM (build 20.45-b01, mixed mode)
The same sonarqube package works on another machine.
Any idea what could be the issue here?
Thanks.
Issue was in the wrapper.conf where the java wrapper command was not getting resolved. It worked if I give the absolute path - ‘wrapper.java.command=/path/to/my/jdk/bin/java’
This could be an issue with an environment on a host.. not sure.
Few things that helped me in troubleshooting this -
log level changed to DEBUG in wrapper.conf
comments given in the wrapper.conf!
Thanks all for chiming in! Appreciate your inputs.
1.Just close all running jvm from task manager
2. Change the port of the sonar runner from the properties
I had the same symptoms (wrapper starts then immediately stops).
I tried these steps and finally succeeded (on a windows 10 pc):
1) in wrapper.conf, specified the java command:
wrapper.java.command=C:\Program Files\Java\jdk1.7...\bin\java.exe
That did not help.
2) Finally this fixed the problem. In the windows Services, open the Sonar service and then open Log On tab.
Changed the Log On to myself as follows:
I was facing the same issue on sonar startup. After reading this post , i modified the JDK path in below file and it works.
Modify the JDK path in wrapper.conf
wrapper.java.command=%JAVA_HOME%/bin/java
Install jdk 11
sudo yum install java-11-openjdk -y
sudo alternatives --config java
Select the JDK 11 version
Set the JDK 11 version in wrapper.conf
vi /opt/sonar/conf/wrapper.conf
wrapper.java.command=/usr/lib/jvm/java-11-openjdk-11.0.13.0.8-3.el8_5.x86_64/bin/java
Could you verify the Java version on the machine starting?
Java 6 is no more supported http://docs.sonarqube.org/display/SONAR/Requirements#Requirements-Prerequisite but from your error message, I don't know if this is the problem you meet.
Solution 1
Set java path globally
Solution 2
Go to sonarqube-{version}/conf directory
Edit wrapper.conf file
Replace wrapper.java.command=java with wrapper.java.command= {path-to-your-java-bin-directory}/java
eg: wrapper.java.command=/usr/java/bin/java
Try using a relative path, if your Sonar Folder is located in the same root folder as your jdk. For me my sonar and jdk are both under "Program Files", which has restrictive permission, hence the error.
E.g:
wrapper.java.command=../../../Java/jdk-11.0.4/bin/java
I installed tomcat 7 in my windows 7.Then ran C:\apache-tomcat-7.0.57\binstartup.bat,one window will open for 1 second and closes.when i hit http //localhost/8080 ,its not dsiplaying anything.I just checked C:\apache-tomcat-7.0.57\conf/server.xml and port is 8080.
Can somebody help on this.
Read RUNNING.txt and create C:\apache-tomcat-7.0.57\bin\setenv.bat file that sets JRE_HOME (or JAVA_HOME) path for Tomcat.
Sample from Tomcat 7 RUNNING.txt file using Java 6 JRE:
set "JRE_HOME=%ProgramFiles%\Java\jre6"
exit /b 0
You need to set Java_Home in Cataline.bat first in order to run TomCat server.
Additional Information for running project using Tomcat Server.
You can cd into the folder where tomcatXX/bin is through command line and run "run startup". So, when you , run startup on command line it tries to run script from startup.bat file, probably it crashed because port to be used by TomCat to run server is already in use. If you try to point your url to localhost:8080, if TomCat's home page appears, that would be because your server is already running. You should ideally also try to point to Windows -> Preference -> Runtime Environment. Check if Tomcat server is added in list under Server Runtime Environment window, if not try to add that server by clicking Add button, and trying to locate where Tomcat/bin is stored. If that still doesn't help, I would suggest you to also try right clicking a project on your IDE then click Run As, then click Run Configuration, it will give you option to run application using TomcatServer. List of servers will be found on left side of Run Configuration window.
I'm installing sonarqube on Windows Server 2012.
I have followed the following steps:
Downloaded sonarqube4.4 and extracted to C:\Sonarqube
Downloaded Java JDK 1.7.0_60 and jre 1.7.0_67 as well as jre7
Installed Windows SDK 7 and .NET Framework 4
Navigated to C:\sonar\bin\windows x86-64 and ran StartSonar.bat as an administrator, this ran ok with no output and Ihad to hot ctrl- Z to break
I then ran \windows-x86-64\InstallNTService.bat as an administrator and I am seeing the sonarQube services was launched, but failed to start.
Not sure what the problem is.
I believe you first ran \windows-x86-64\InstallNTService.bat successfully and then StartSonar.bat unsuccessfully (the inverse order of what you describe).
You probably have [this problem]: http://qualilogy.com/fr/wp-content/uploads/sites/2/2013/09/Sonar_ServiceLaunchError2.jpg
Windows could not start the Sonar service on Local Computer.
Error 1067: The process terminated unexpectedly.
In that case, the solution is to change the user/rights to launch the Sonar service: https://qualilogy.com/en/migrate-sonarqube-tomcat-to-windows-service/
Go to the Services window, find the Sonar service, and open the Properties windows to change the user it logs on as to one with sufficient permissions.
I was able to solve this problem by creating a new folder named “Temp” in C:\Windows\System32\config\systemprofile\AppData\Local\
The Log-File will show only
--> Wrapper Started as Service
Cleaning or creating >temp directory C:\Program Files (x86)\SonarQube\sonarqube\temp
<-- Wrapper Stopped
The SonarQube service was launched, but failed to start.
After a long search, I came up to this site http://zen-and-art-of-programming.blogspot.de/2013/03/installing-and-running-sonar-source.html.
Solution:
Navigate to C:\Windows\system32\config\systemprofile\AppData\Local\ and create the directory Temp
2: Set the user rights to full access
3: Run the StartNTService.bat
I am a newbie on Liferay and furthermore 100% Windows infrastructure knowledge based. I installed Liferay 6.2 on my Windows 2012R2 server together with Java jdk-8u5 version. All is running perfect as long as I am logged in as user on the Server via remotedesktop having open the tomcat startup.bat window.
What have I to do exactly to start Liferay and/or tomcat as service?
Thanks in advance for your efforts.
Configuring liferay or tomcat to run as a service on a windows server doesn't differ that much.So in order to do that you have to add some files to the LIFERAY_HOME\tomcat\bin directory.
To get those files you have to download a full version of 64-bitWindows tomcat from here :
http://tomcat.apache.org/download-70.cgi.
Extract the zip and go to the bin directory, copy service.bat , tomcat7.exe and tomcat7w.exe to this location : LIFERAY_HOME\tomcat\bin
Setting Up the service
Open the commad prompt (Make sure you have admin rights or run the command prompt as administrator),In Command Prompt go to LIFERAY_HOME\tomcat\bin and Execute the following command
service.bat install tomcat7
This will install the tomcat6 service in windows.
Now execute following commond to setup additional configuration for the service
tomcat7w.exe ES tomcat7.exe
2 . Extra configuration :
-XX:MaxPermSize=512m
-Dfile.encoding=UTF8
-Duser.timezone=GMT
-Djava.security.auth.login.config="%CATALINA_HOME%/conf/jaas.config"
-Dorg.apache.catalina.loader.WebappClassLoader.ENABLE_CLEAR_REFERENCES=false
and make sure to provide enough memory for your service by setting the initial memory pool and the maximum one.
Either go with Rafik Beldi's answer (quite an effort, wow) or just go to tomcat's documentation in case you're still missing some information
I had to delete what was in Java Options completely or it wouldn't start: and then I entered:
-XX:MaxPermSize=512m
-Dfile.encoding=UTF8
-Duser.timezone=America/New_York
-Dorg.apache.catalina.loader.WebappClassLoader.ENABLE_CLEAR_REFERENCES=false
-Djava.net.preferIPv4Stack=true
note that where I am: America/New_York allows for both EST and EDT