I am getting a lot of 'del' call on GCP Memorystore approx at a rate of 6k/sec. But I am unable to identify the source that's making these 'del' calls.
I have tried accessing logs of the particular memory-store server but didn't get anything related with calls information.
I need to figure out who is making these 'del' calls on my memorystore.
Any suggestions......
Thanks
You may use monitor command to list every command processed by Redis server. You need to use with grep to filter DEL commands from the whole stream. By default grep is case sensitive, -i is added for to filter both DEL and del.
redis-cli -h your.host.name monitor | grep -i del
it will print in following format. You may use ip address to identify who is deleting.
1588013292.976045 [0 127.0.0.1:44098] "del" "foo"
1588013294.875606 [0 127.0.0.1:44098] "DEL" "foo"
1588013298.285791 [0 127.0.0.1:44098] "dEl" "foo"
Using monitor is not going to be free, please check the benchmark numbers.
Related
I am selecting error log details from a docker container and decide within a shell script, how and when to alert about the issue by discord and/or email.
Because I am receiving the email alerts too often with the same information in the email body, I want to implement the following two adjustments:
Fatal error log selection:
FATS="$(docker logs --since 24h $NODENAME 2>&1 | grep 'FATAL' | grep -v 'INFO')"
Email sent, in case FATS has some content:
swaks --from "$MAILFROM" --to "$MAILTO" --server "$MAILSERVER" --auth LOGIN --auth-user "$MAILUSER" --auth-password "$MAILPASS" --h-Subject "FATAL ERRORS FOUND" --body "$FATS" --silent "1"
How can I send the email only in the case, FATS has another content than the previous run of the script? I have thought about a hash about its content, which is stored and read in a text file. If the hash is the same than the previous script run, the email will be skipped.
Another option could be a local, temporary variable in the global user's bash profile, so that there is no file to be stored on the file system (to avoid read / writes).
How can I do that?
When you are writing a script for your monitoring, add functions for additional functionality, like:
logging all the alerts that have been send
make sure you don't send more than 1 alert each hour
consider sending warnings only during working hours
escalate a message when it fails N times without intermediate success
possible send an alert to different receivers (different email adresses or also to sms or teams)
make an interface for an operator so he can look back when something went wrong the first time.
When you have control which messages you send, it is easy to filter duplicate meassages (after changing --since).
I‘ve chosen the proposal of #ralf-dreager and reduced selection to 1d and 1h. Consequently, I‘ve changed my monitoring script to either go through the results of 1d or just 1h, without the need to select each time again and again. Huge performance improvement and no need to store anything else in a variable or on the file system.
FATS="$(docker logs --since 1h $NODENAME 2>&1 | grep 'FATAL' | grep -v 'INFO')"
I am using UFTP to transfer files within the subnetwork computers.
But when I used -H to send only particular computers instead of sending to all computers, it is not working as expected.
Let me explain in detail :
I have two windows machines in same network of IP's 172.21.170.198,172.21.181.216 respectively.
From one of the system, I used below mentioned command to send the file
uftp.exe -R 100000 -H 172.21.170.198,172.21.181.216 e:\setup.exe
But both machines won't receive those file.
But if I use this command both machines will receive the file.
uftp.exe -R 100000 E:\setup.exe
I want to know whether I made any mistake.
Please correct me if I am wrong.
Thanks in Advance.
Kindly revert back for any clarifications.
Regards,
Thiyagu
If ipv6 isn't enabled, it would look like this, converting the ipv4 addresses to hex (with a converter like http://www.kloth.net/services/iplocate.php):
uftp.exe -R 100000 -H 0xAC15AAC6,0xAC15B5D8 e:\setup.exe
But if you have an ipv6 address on the client, the client id sort of comes from the end of it backwards. Like if the address was "fe80::e5ca:e3ca:fea3:153f%5", the command would look like:
uftp.exe -R 100000 -H 0x3f15a3fe e:\setup.exe
(coming from "fe a3 15 3f")
I’m creating a small script to take the output from tshark and print it out to terminal. I'm trying to to only filter by requests made through the browser address bar.
So when www.facebook.com is loaded, the terminal only prints out facebook.com, rather than fbstatic-a.akamaihd.net etc .. (other DNS requests made through the requested website)
This program loops forever repeating dns requests and writes to the terminal.
Any ideas?
Would the following work for you?
$ tshark -r dns.pcap -T fields -e dns.qry.name -Y "dns.qry.type == 0x0001 and udp.dstport == 53"
www.yahoo.com
The display filter (the part after "Y") is to limit the query type to be for A record (you want to avoid CNAME etc) in the request.
dns.qry.type == 0x0001 is for A record, udp.dstport == 53 is for DNS request.
Hope it helps.
On the Parse.com cloud-code console, I can see logs, but they only go back maybe 100-200 lines. Is there a way to see or download older logs?
I've searched their website & googled, and don't see anything.
Using the parse command-line tool, you can retrieve an arbitrary number of log lines:
Usage:
parse logs [flags]
Aliases:
logs, log
Flags:
-f, --follow=false: Emulates tail -f and streams new messages from the server
-l, --level="INFO": The log level to restrict to. Can be 'INFO' or 'ERROR'.
-n, --num=10: The number of the messages to display
Not sure if there is a limit, but I've been able to fetch 5000 lines of log with this command:
parse logs prod -n 5000
To add on to Pascal Bourque's answer, you may also wish to filter the logs by a given range of dates. To achieve this, I used the following:
parse logs -n 5000 | sed -n '/2016-01-10/, /2016-01-15/p' > filteredLog.txt
This will get up to 5000 logs, use the sed command to keep all of the logs which are between 2016-01-10 and 2016-01-15, and store the results in filteredLog.txt.
Using a Raspi/Debian - I have a script that parses the results from an iwlist scan and sends them via UDP to a Pure Data patch. This runs fine in gui mode, but now I'm trying to automate the whole process in another script with the following:
pd-extended -nogui /home/pi/patch.pd & /home/pi/libOSC/scan.sh && fg
But when I run this new script, the UDP appears to only send the info to Pure Data once, and then the scanning continues but Pd does not receive the packet. Any help with this would be appreciated.
What happens when you run /home/pi/libOSC/scan.sh? It sends the results only once? Then maybe you need to do it differently, like calling that script from within pd using the 'shell' or 'popen' objects for instance. Or you implement a polling command via UDP that will return the values.
how does your scan.sh script look like?
you probably want to make it something like:
pdhost=localhost
pdport=9999
do_scan() {
## some code here that does the scan and print's the result to stdout
}
doscan | while read line
do
echo "${line};" | pdsend ${pdhost} ${pdport}
done
rather than the following:
doscan | pdsend ${pdhost} ${pdport}