I am trying to set up hadoop locally on my windows 7 computer by the instructions on the following link:
https://dimensionless.in/know-how-to-install-and-run-hadoop-on-windows-for-beginners/
I followed each single step and hadoop looks to be properly installed as I checked it by running this command: hadoop version in the windows command prompt and it returned the installed hadoop version hadoop 3.1.0 successfully.
However it failed to start all the nodes e.g. namenode, data node, yarn. I realised it must be to do with the port used as I use local port 9000 in the core site configuration: hdfs://localhost:9000 , and I checked if the port is open by running command: telnet localhost 9000, and it returned the message that failed to open the port.
Can anyone provide any guidance on the above issue which looks to be the port issue which then failed the hadoop service from starting up?
Thank you.
Related
I have a 5 node hadoop cluster running HDP 2.3.0. I setup a H2O cluster on Yarn as described here.
On running following command
hadoop jar h2odriver_hdp2.2.jar water.hadoop.h2odriver -libjars ../h2o.jar -mapperXmx 512m -nodes 3 -output /user/hdfs/H2OTestClusterOutput
I get the following ouput
H2O cluster (3 nodes) is up
(Note: Use the -disown option to exit the driver after cluster formation)
(Press Ctrl-C to kill the cluster)
Blocking until the H2O cluster shuts down...
When I try to execute the command
h2o.init(ip="10.113.57.98", port=54321)
The process remains stuck at this stage.On trying to connect to the web UI using the ip:54321, the browser tries to endlessly load the H2O admin page but nothing ever displays.
On forcefully terminating the init process I get the following error
No instance found at ip and port: 10.113.57.98:54321. Trying to start local jar...
However if I try and use H2O with python without setting up a H2O cluster, everything runs fine.
I executed all commands as the root user. Root user has permissions to read and write from the /user/hdfs hdfs directory.
I'm not sure if this is a permissions error or that the port is not accessible.
Any help would be greatly appreciated.
It looks like you are using H2O2 (H2O Classic). I recommend upgrading your H2O to the latest (H2O 3). There is a build specifically for HDP2.3 here: http://www.h2o.ai/download/h2o/hadoop
Running H2O3 is a little cleaner too:
hadoop jar h2odriver.jar -nodes 1 -mapperXmx 6g -output hdfsOutputDirName
Also, 512mb per node is tiny - what is your use case? I would give the nodes some more memory.
I have installed Hadoop and Hive on CentOS 5.8. Hadoop is working fine but I am not able to start hiveserver2. Running the command $HIVE_HOME/bin/hiveserver2 gives no output. I have also checked and no process is listening to port 10000 which is the default port. What can be the possible cause?
The problem was my namenode went into safemode. Turning off safemode fixed the problem.
I am new to the spark, After installing the spark using parcels available in the cloudera manager.
I have configured the files as shown in the below link from cloudera enterprise:
http://www.cloudera.com/content/cloudera-content/cloudera-docs/CM4Ent/4.8.1/Cloudera-Manager-Installation-Guide/cmig_spark_installation_standalone.html
After this setup, I have started all the nodes in the spark by running /opt/cloudera/parcels/SPARK/lib/spark/sbin/start-all.sh. But I couldn't run the worker nodes as I got the specified error below.
[root#localhost sbin]# sh start-all.sh
org.apache.spark.deploy.master.Master running as process 32405. Stop it first.
root#localhost.localdomain's password:
localhost.localdomain: starting org.apache.spark.deploy.worker.Worker, logging to /var/log/spark/spark-root-org.apache.spark.deploy.worker.Worker-1-localhost.localdomain.out
localhost.localdomain: failed to launch org.apache.spark.deploy.worker.Worker:
localhost.localdomain: at java.lang.ClassLoader.loadClass(libgcj.so.10)
localhost.localdomain: at gnu.java.lang.MainThread.run(libgcj.so.10)
localhost.localdomain: full log in /var/log/spark/spark-root-org.apache.spark.deploy.worker.Worker-1-localhost.localdomain.out
localhost.localdomain:starting org.apac
When I run jps command, I got:
23367 Jps
28053 QuorumPeerMain
28218 SecondaryNameNode
32405 Master
28148 DataNode
7852 Main
28159 NameNode
I couldn't run the worker node properly. Actually I thought to install a standalone spark where the master and worker work on a single machine. In slaves file of spark directory, I given the address as "localhost.localdomin" which is my host name. I am not aware of this settings file. Please any one cloud help me out with this installation process. Actually I couldn't run the worker nodes. But I can start the master node.
Thanks & Regards,
bips
Please notice error info below:
localhost.localdomain: at java.lang.ClassLoader.loadClass(libgcj.so.10)
I met the same error when I installed and started Spark master/workers on CentOS 6.2 x86_64 after making sure that libgcj.x86_64 and libgcj.i686 had been installed on my server, finally I solved it. Below is my solution, wish it can help you.
It seem as if your JAVA_HOME environment parameter didn't set correctly.
Maybe, your JAVA_HOME links to system embedded java, e.g. java version "1.5.0".
Spark needs java version >= 1.6.0. If you are using java 1.5.0 to start Spark, you will see this error info.
Try to export JAVA_HOME="your java home path", then start Spark again.
Hi I am new to Hadoop.
Hadoop Version (2.2.0)
Goals:
Setup Hadoop standalone - Ubuntu 12 (Completed)
Setup Hadoop standalone - Windows 7 (cygwin being used for only sshd) (Completed)
Setup cluster with Ubuntu Master and Windows 7 slave (This is mostly for learning purposes and setting up a env for development) (Stuck)
Setup in relationship with the questions below:
Master running on Ubuntu with hadoop 2.2.0
Slaves running on Windows 7 with a self compiled version from hadoop 2.2.0 source. I am using cygwin only for the sshd
password less login setup and i am able to login both ways using ssh
from outside hadoop. Since my Ubuntu and Windows machine have
different usernames I have set up a config file in the .ssh folder
which maps Hosts with users
Questions:
In a cluster does the username in the master need to be same as in the slave. The reason I am asking this is that post configuration of the cluster when I try to use start-dfs.sh the logs say that they are able to ssh into the slave nodes but were not able to find the location "/home/xxx/hadoop/bin/hadoop-daemon.sh" in the slave. The "xxx" is my master username and not the slaveone. Also since my slave in pure Windows version the install is under C:/hadoop/... Does the master look at the env variable $HADOOP_HOME to check where the install is in the slave? Is there any other env variables that I need to set?
My goal was to use the Windows hadoop build on slave since hadoop is officially supporting windows now. But is it better to run the Linux build under cygwin to accomplish this. The question comes since I am seeing that the start-dfs.sh is trying to execute hadoop-daemon.sh and not some *.cmd.
If this setup works out in future, a possible question that I have is whether Pig, Mahout etc will run in this kind of a setup as I have not seen a build of Pig, Mahout for Windows. Does these components need to be present only on the master node or do they need to be in the slave nodes too. I saw 2 ways of running mahout when experimenting with standalone mode first using the mahout script which I was able to use in linux and second using the yarn jar command where I passed in the mahout jar while using the windows version. In the case Mahout/ Pig (when using the provided sh script) will assume that the slaves already have the jars in place then the Ubuntu + Windows combo does not seem to work. Please advice.
As I mentioned this is more as an experiment rather than an implementation plan. Our final env will be completely on linux. Thank you for your suggestions.
You may have more success going with more standard ways of deploying hadoop. Try out using ubuntu vm's for master and slaves.
You can also try to do a pseudo-distributed deployment in which all of the processes run on a single VM and thus avoid the need to even consider multiple os's.
I have only worked with the same username. In general SSH allows to login with a different login name with the -l command. But this might get tricky. You have to list your slaves in the slaves file.
At least at the manual https://hadoop.apache.org/docs/r0.19.1/cluster_setup.html#Slaves I did not find anything to add usernames. it might be worth trying to add -l login_name to the slavenode in the slave conf file and see if it works.
I installed the hadoop 2.2 system on my ubuntu box using this tutorial
http://codesfusion.blogspot.com/2013/11/hadoop-2x-core-hdfs-and-yarn-components.html
Everything worked fine for me and now when I do
http://localhost:50070
I can see the management UI for HDFS. Very good!!
But the I am going through another tutorial which tells me that there must be a task manager UI running at http://mymachine.com:50030 and http://mymachine.com:50060
on my machine I cannot open these ports.
I have already done
start-dfs.sh
start-yarn.sh
start-all.sh
is something wrong? why can't I see the task manager UI?
You have installed YARN (MRv2) which runs the ResourceManager. The URL http://mymachine.com:50030 is the web address for the JobTracker daemon that comes with MRv1 and hence you are not able to see it.
To see the ResourceManager UI, check your yarn-site.xml file for the following property:
yarn.resourcemanager.webapp.address
By default, it should point to : resource_manager_hostname:8088
Assuming your ResourceManager runs on mymachine, you should see the ResourceManager UI at http://mymachine.com:8088/
Make sure all your deamons are up and running before you visit the URL for the ResourceManager.
For Hadoop 2[aka YARN/MRV2] - Any hadoop installation version-ed 2.x or higher its at port number 8088. eg. localhost:8088
For Hadoop 1 - Any hadoop installation version-ed lower than 2.x[eg 1.x or 0.x] its at port number 50030. eg localhost:50030
By default HadoopUI location is as below
http://mymachine.com:50070