I am getting this error and my app will not compile. The problem is that I had to upgrade macos to be able to compile apps on newer iOS versions, and in doing so I copied my project over from my mojave machine to my catalina one. The directory users/mojave no longer exists, and it needs to be replaced with users/catalina
I have searched the app for any reference of mojave anywhere, and replaced it all with catalina. I have rebooted macos, and it still fails, looking for this old directory.
How do I find and change these references? I am not able to find anything online, possibly because I don't really know how to phrase this question.
So this is another one of those occasions where the error doesn't really indicate what is wrong here.
The problem was that "pods setup" had not been run, so it had not initialised.
The reason for this is that when I ran "pod setup" it does literally nothing.
Researching this issue online, it seems an issue since cocoapods 1.8.0, and the dev team said that they had hotfixed this issue and it would be available from version 1.8.1
Well, this was version 1.8.4 and it is still broken with exactly the same issue.
The fix was to uninstall it completely:
sudo gem uninstall cocoapods
And then install version 1.7.5:
sudo gemo install cocoapods --version 1.7.5
From here, with the older version installed that actually works, "pod setup" runs fine, pods is initialised and the app no longer looks in the incorrect folders.
Hope this helps someone.
I am trying to use pyinstaller with python that I installed via Anaconda. I also use Spyder that installed with Anaconda. If I install Anacoda without installing pyinstaller, then Spyder works, if I install pyinstaller, then Spyder stops working or in some instances when using pyinstaller, it complains that it cannot find the PyQt5 plugins. I have tried everything and also searched on google, but cannot find a solution that resolves this issue. It is on my work laptop, which still uses Windows 7. Does someone perhaps know how to resolve this?
I searched on google for potential solutions and tried some suggestions, nothing works.
P.S.: Sorry me and please be lenient with my English.
Since I Updated my PhpStorm, internal terminal stop works.
My terminal is not work now, just a gray screen:
My OS:
Ubuntu 16.04.2 LTS
I'd installed:
I try to remove all my local settings, then reinstalled it without any imported settings, but nothing changed.
at idea.log I found that: error.
How to decide it?
It had been solved. I don't know about what was reason of it.
But I had been upgrade all installed tools at my system. Then I try again fully "reinstall" (remove&download&extract&init) PHPStorm with deleting personal settings and plugins. And finally now it's work.
I am trying to install the appcelerator cli but keep running into an issue that I haven't been able to find a fix for.
When running the "appc setup" command I get the error "cannot find module 'C:\cyclic.js'"
link to full screen capture of error
I am running windows 7 64 bit and am following the directions here https://web.appcelerator.com/product/cli
*Edit: If you are facing this same issue. Uninstall Node, and Appcelerator. Then make sure you install JDK 32 Bit (if using windows). DELETE the NPM and Appcelerator folders in your C:\Users[username]\AppData\Roaming\ directory. Then reinstall Node (I had success with 32 bit) and the Appcelerator CLI. That worked for me.
Hello make sure you have node.js and JDK installed and environment variable set properly. For reference http://docs.appcelerator.com/platform/latest/#!/guide/Installation_and_Configuration. Now, As you already tried "appc setup". You need to delete all cache of previous installation try and try reinstalling again. Run,
sudo rm -rf ~/.appcelerator
sudo npm uninstall -g appcelerator
appc use latest
appc setup
To setup the Appcelerator CLI, install Node.js, install the appcelerator module using the NPM CLI, then run the appc setup command to download and setup the latest CLI package. You can follow the guide here. Also you can check this link, if you experience an issue installing any of the npm packages.
If still not solved, I suggest you to start from scratch. I see you work on Windows, true?:
Remove install of NodeJS from "Uninstall programms" of control pannel
Remove install of Appcelerator from "Uninstall programms" of control pannel
Remove any folder from C:\Program Files or your user's folder referencing "node" "npm" or similar.
Go to your user's folder and remove any .app or .appcelerator folder (could be hidden, so look it well)
Don't forget to look in C:\Users\[username]\AppData\Roaming (probably will be hidden)
Now you have only Java JDK installed (I'm using 1.8).
Proceed with a new appcelerator.EXE install, it must detect that you don't have Node and will download by itself the proper Node version.
I have recently tried to install Python 3.4 as an alternative installation on my system in an attempt to familiarise myself before migrating code. My main Python installation is 2.7.6.
I tried the 64 bit installer for Windows, but it came up with an error message
There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
After this the install is rolled back (from the point shown below):
I have eventually found a solution to this posted below and decided to share in case anyone else was having the same issue.
After some looking online I found (here) that the issue was related to conflicting pip installs (I have a version already installed for Python 2.7 and apparently this is not compatible with the version that ships with Python 3.4.
To get around this issue I simply de-selected pip from the install options shown below and the install went ahead smoothly:
Run installer again and select PIP installation.
If the PIP fails to install with the same error, you may want to check environmental variables using a tool like http://eveditor.com/ which enables to check whether they are valid. If you had another version installed before, you most likely have wrong PYTHONHOME and PYTHONPATH variables. Fix them by setting them to relevant paths. e.g. PYTHONHOME=C:\python27 and PYTHONPATH=c:\python27\Lib
You will then be able to run and install PIP.
My issue was that I had a PYTHON_HOME or PYTHON_SOMETHING environment variable set. After removing the environment variable, the installation worked perfectly.
What worked for me, strangely enough, was the "Microsoft Program Install and Uninstall troubleshooter"
The "deselect pip" solution did not work for me.
My Python 3.4.1 install was failing with the same "A program run as part of the setup did not finish as expected" error. I tried both installing it on top of Python 3.4.0 and installing it in a new folder, but got the same error. I tried uninstalling Python 3.4.0 first, but got the error during the uninstall, as well.
I ran that Microsoft utility, which helped me uninstall 3.4.0, and was then able to install 3.4.1 cleanly. The utility has options for both problematic installs and uninstalls, so it may help even if you're doing a new install, not an upgrade.
I'm running 64-bit Windows 7, but was working with 32-bit Python versions.
I had similar issues with Python 3.4x on Windows 8.1. Even after a successful install, the uninstaller would fail in the same way. Ultimately, "Method 1" at the MS forum solved this for me when I ran Microsoft's (Un)installer Fix It.
I also had the problem that pip couldn't be installed like #ChrisPosser.
So I deselected pip and the installation went fine. afterwards I restarted the setup, chose "change python" and installed pip. now everything worked like expected.
If you have any problems with windows installers I recommend activating the verbose log like this:
msiexec /i python-2.7.10-1.609.2.msi /lv install-python.log
From the logs I could see that it was the pip install, which was not working.
Yes, I faced the same issue, and was working on this for the past one hour. Was trying to uninstall the Python 3.4.1 from the control panel -> uinstall program -> add/remove program, but was facing issues.
This trick worked for me:
Manually deleted the 3.4.1 folder, which was present in my C folders after I installed the 3.4.1
Then I followed these steps:
-> Went to Regedit.exe, checked in both HKEY_CURRENT_USER, HKEY_LOCAL SOFTWARE Folder, and deleted the Python folders there.
-> windows 8 -> Downloads -> 3.4.1 msi setup (Glad I never deleted it)
-> Right clicked on the msi setup and choose the repair option
-> The repair would re install the Python 3.4.1
-> After this, I un-installed the Python 3.4.1
-> Then I deleted the 3.4.1 msi setup.
Rebooted the system, and now, there is no instance of Python 3.4.1 in my system.
According to me when environment variables containing name 'Python' are created they somehow becomes related with python. I was unable to open idle (GUI PUTHON) and to uninstall it . Deleting a variable named 'PYTHON PATH' solved my all python related problems.
I had 3.7.4 and wanted to move to 2.7.13.
I uninstalled 3.7.4
Tried to install 2.7.13 but got the same error.
There was a 2.7.10 installer(not msi) also present, uninstalling which gave the same error.
So I downloaded 2.7.10 msi, installed it, and then just installed 2.7.13 from the downloaded msi and it worked fine. This overwriting worked because the major version i.e. 2.7 was same for both.
I don't know if this is helpful but after the hours I spent on this, I wanted to write out what worked for me.
Yup, I have already installed another version of python. I have uninstalled them using Program features. But still the same issue persisted because of the folder which was present in my C: drive. After deleting them manually, the installation got completed without errors
I faced this issue because of 2 conflicting versions of 7zip. Removing them both and installing just one fixed this issue.
I had python3.4 installed, then added 3.5, and deleted 3.4. That was a mistake. In trying to get a library to work, I had to go back to 3.4. I uninstalled 3.5, but couldn't uninstall 3.4 (folder deleted).
I ended up searching the registry in rededt32 for "python". There was a Guid folder with a number of entries that had c:\python34 and one more related to the same folder that I deleted. After this, the install worked correctly.
Windows 10.
Mine was linked to having installed an older version in the past, only for my own user account. I got around it by telling the installer to install Python for all users.
For me none of the suggested fixes worked for me. However checking the option "Install just for me" instead of "Install for all users" (Windows 10) worked for me. So this might be another option to try.