I am getting this error and my app will not compile. The problem is that I had to upgrade macos to be able to compile apps on newer iOS versions, and in doing so I copied my project over from my mojave machine to my catalina one. The directory users/mojave no longer exists, and it needs to be replaced with users/catalina
I have searched the app for any reference of mojave anywhere, and replaced it all with catalina. I have rebooted macos, and it still fails, looking for this old directory.
How do I find and change these references? I am not able to find anything online, possibly because I don't really know how to phrase this question.
So this is another one of those occasions where the error doesn't really indicate what is wrong here.
The problem was that "pods setup" had not been run, so it had not initialised.
The reason for this is that when I ran "pod setup" it does literally nothing.
Researching this issue online, it seems an issue since cocoapods 1.8.0, and the dev team said that they had hotfixed this issue and it would be available from version 1.8.1
Well, this was version 1.8.4 and it is still broken with exactly the same issue.
The fix was to uninstall it completely:
sudo gem uninstall cocoapods
And then install version 1.7.5:
sudo gemo install cocoapods --version 1.7.5
From here, with the older version installed that actually works, "pod setup" runs fine, pods is initialised and the app no longer looks in the incorrect folders.
Hope this helps someone.
Related
Recently with macos 12.6 - after running
homebrew upgrade
I was getting a prompt to install clang. I was not paying attention to the console and installed it. But it kept on happening and I kept on installing clang. As this issue might repeat I would like to share my solution
#1 - this is related to xcode unapplied update to OS 16 and it's packages. Launch Xcode and update everything requested
#2 -
xcodebuild -runFirstLaunch
You can also use this command.
Hopefully my steps will solve your issue. Couldn't find solution anywhere, so decided to share it here
tldr: Ruby is reporting an illegal instruction when I try to update my pod, maybe because I’m using two different versions of it.
I am not sure what my problem is, and I’ll happily add more information should it be helpful.
I got a new M1 Pro Mac and have been trying to get an XCode project (an iOS app) to work on it. It happily builds for my phone but fails to build for simulators. Based on this answer, I tried to update cocoapods and then the pods I’m using for my project (some of the Google Firebase pods). When I run pod update, I get the following result:
Update all pods
Updating local specs repositories
/Library/Ruby/Gems/2.6.0/gems/ethon-0.15.0/lib/ethon/curls/classes.rb:36: [BUG] Illegal instruction at 0x0000000100224000
ruby 2.6.8p205 (2021-07-07 revision 67951) [universal.arm64e-darwin21]
This is then followed by several hundred lines of reporting (saved here). It also saves a diagnostic report (here). I believe that both of these are red herrings, but I wanted to include them just in case.
My guess for what’s going wrong is that the library is 2.6.0, while ruby itself is version 2.6.8. Both of these are old, and they’re also different versions. I tried to update ruby, gem, and reinstalled cocoapods, but none of these changed these version numbers. Any help getting these versions updated would be appreciated.
My apologies for such an indirect question; if I were more sure what the problem was, I probably would have solved it.
If you are on an M1 chip, uninstall the cocoapods package through gem (sudo gem uninstall cocoapods) and reinstalling it with homebrew (brew install cocoapods), this fixed my problem.
I believe the issue was that my newly updated ruby versions weren’t being copied to my homebrew path. This command (from this answer) ended up solving it!
PATH=/usr/local/opt/ruby/bin:$PATH
GEMSDIR=$(gem environment gemdir)/bin
PATH=$GEMSDIR:$PATH
export PATH
Answering my own question for anyone else having this issue. (using the search terms i thought of because they didn't bring up the answers for me).
Trying to install and run middleman following the getting started guide on their website with Mac OS X 10.9.2. When trying to run bundle install getting errors about openSSL and event machine.
Gist of Errors.
Refrence to an answer that someone on IRC helped me find.
Aparently this is caused by a mismatch in expected versions with something called Clang which is part of the Xcode tools for mac. The update to Xcode tools causes this to fail. Using the command:
ARCHFLAGS=-Wno-error=unused-command-line-argument-hard-error-in-future bundle install
seems to work to resolve this issue.
I was actually trying to update ruby on my OSX 10.7.5 with RVM, and after typing in the following command:
rvm install ruby
I got the following response:
Searching for binary rubies, this might take some time.
Checking requirements for osx.
Installing requirements for osx.
Updating system.......
Error running 'requirements_osx_brew_update_system ruby-2.0.0-p247',
please read /Users/username/.rvm/log/1381215459_ruby-2.0.0-p247/update_system.log
Requirements installation failed with status: 1.
Then, when I checked out the update_system.log, it showed me the actual code of a function called requirements_osx_brew_update_system(), which contained the following error message:
Xcode version older than 4.6.2 installed, download and install newer version from:
http://connect.apple.com
After installation open Xcode, go to Downloads and install Command Line Tools.
Then I proceeded to find an update for Xcode, but only found the latest Xcode 5.0, which is apparently incompatible with my OSX 10.7. Although ultimately my goal is to update ruby and install rails, which I'm sure there are many other ways to do, I'd still like to find out if I could possibly install Xcode 4.6.2 on my OSX 10.7.
UPDATE: Sorry folks, apparently my version of XCode is v4.6.1 so updating the command line tools will not work in all cases (I know for a fact it doesn't work if you're on XCode v4.3.3). YMMV
I ran into the same issue trying to do an rvm install. I got an error telling me that I needed XCode 4.6.2 or later.
Turns out all it needed was the latest version of the XCode command line tools. I followed the instructions for upgrading my command line tools from this macports article:
open the Xcode application
go to the Preferences window
open the Downloads section
click the Install button next to "Command Line Tools"
After doing this I was able to run my rvm install command and it didn't complain about upgrading XCode anymore (and finished successfully).
It seems you're going to have to install under Xcode 5. So go to https://developer.apple.com/downloads/ and log in with your developer ID to get to the older versions. There should be a 4.6.3 that you could potentially download, or even 4.6.2.
Or you could upgrade your OSX to 10.8.
Whichever you prefer.
I can't give you a direct link to it, since you need your developer information to log in yourself. But all the downloads you need are in the link provided above once you log in.
Open xcode and update it via the app store.
Then
xcode-select --install
This will install xcode via the command line
I installed homebrew, and it keeps complaining that:
Warning: Your Xcode (4.2) is outdated
Please install Xcode 4.6.2.
As I learned there is no way to update Xcode so I just downloaded / installed the latest version.
The warning did not go away, and as I learned, I now have 2 versions installed:
and the warning did not go away
How do I now eliminate the old version? I just wanted to update it really.
The /Developer location is now obsolete. Xcode now runs entirely from the application bundle in /Applications/Xcode.app.
To remove it properly, run this from Terminal:
sudo /Developer/Library/uninstall-devtools --mode=all
Although, I've simply moved /Developer it to the Trash in the past and that seemed to work fine.
You'll need to go into Xcode.app's preferences afterwards and install Command Line Tools from Downloads->Components. I came across a tutorial for setting up homebrew for new Xcode installations.