Just to precise I'm a total beginner in this. I check on the internet and it seems that nothing match to this problem.
My goal is to run this github which is a facial recognition program: https://github.com/anisayari/easy_facial_recognition
So here is the error:
Class RunLoopModeTracker is implemented in both
/Users/pierre/anaconda3/lib/python3.7/site-packages/cv2/.dylibs/QtCore (0x1086267f0)
and /Users/pierre/anaconda3/lib/libQt5Core.5.9.7.dylib (0x122fc0a80).
One of the two will be used. Which one is undefined.
From what I understand, I just have to indicate which one to use but I don't find anything about how to do it. Also, It seems to be a recurrent error on Mac.
I had this error on my Mac too. Apparently opencv's GUI tools were conflicting with the PYQT libraries that were also installed on my system in my anaconda/lib/ folder. So to give opencv just one set of GUI tools and since I wasn't sure what else was using PYQT in my lib, I chose to use the non-GUI version of opencv, aka opencv-python-headless. I previously had opencv-python-headless installed on my system, and maybe the two packages can't co-exist in the new version of OpenCV or with Catalina.
I removed opencv-python
pip uninstall opencv-python
uninstalled and reinstalled the headless version (which has no GUI tools)
pip uninstall opencv-python-headless
pip install opencv-python-headless
I don't know if it was necessary to remove then reinstall the existing headless package, but that's what I did. I wasn't sure that opencv-headless would find the PYQT in my lib but it didn't have any problems.
I have installed the Anaconda 3 in my windows 10 and it has not installed the Scripts folder and the Anaconda Prompt or Navigator applications.
I have come here and in other sources for an answer and tried to reinstall, use the cmd as adm to install with the conda commands, but the system does not recognize the conda command. I have seen answers with the Scripts folder, but it was not installed.
I have also seen answers advising me to install miniconda and then update to anaconda, but again, miniconda has the same problem as anaconda: no scripts folder, no recognition of the conda command.
I don't know what to do.
Dear all who may have had the same problem, what worked for me was to install the 32-bit version, I had heard it was more stable.
I did not have to restart Windows after installing this version, It was already there, Anaconda Prompt and Navigator.
I work on a hp Probook with windows 10 and the problem was that the application hp Sure Sense Installer block the installation of anaconda. After uninstalling the hp Sure Sense Installer application and reinstalling anaconda, everything works fine !
I have installed git-cola using the setup installer for windows. I pointed it to proper installs of git and python.
When I try to launch git-cola, nothing happens whatsoever.
Is there something I am missing here?
I had the same problem, in my case it was missing PyQt4 library. You can install PyQt4 by downloading an appropriate installer from Binary Packages section on PyQt4 Riverbank website.
How I investigated the issue
When I installed git-cola in a default directory and tried to run it using a command line
C:\Program Files (x86)\git-cola\bin>python git-cola.pyw
I got
Sorry, you do not seem to have PyQt4 installed.
Please install it before using git-cola.
e.g.: sudo apt-get install python-qt4
Note
I have two Python 2.7 installations, one at c:\program\Python27 and another at C:\Users\UserName\Anaconda2, I used the first one. I also installed Python SIP some time ago, I'm not sure if it required by git-cola.
I have recently tried to install Python 3.4 as an alternative installation on my system in an attempt to familiarise myself before migrating code. My main Python installation is 2.7.6.
I tried the 64 bit installer for Windows, but it came up with an error message
There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
After this the install is rolled back (from the point shown below):
I have eventually found a solution to this posted below and decided to share in case anyone else was having the same issue.
After some looking online I found (here) that the issue was related to conflicting pip installs (I have a version already installed for Python 2.7 and apparently this is not compatible with the version that ships with Python 3.4.
To get around this issue I simply de-selected pip from the install options shown below and the install went ahead smoothly:
Run installer again and select PIP installation.
If the PIP fails to install with the same error, you may want to check environmental variables using a tool like http://eveditor.com/ which enables to check whether they are valid. If you had another version installed before, you most likely have wrong PYTHONHOME and PYTHONPATH variables. Fix them by setting them to relevant paths. e.g. PYTHONHOME=C:\python27 and PYTHONPATH=c:\python27\Lib
You will then be able to run and install PIP.
My issue was that I had a PYTHON_HOME or PYTHON_SOMETHING environment variable set. After removing the environment variable, the installation worked perfectly.
What worked for me, strangely enough, was the "Microsoft Program Install and Uninstall troubleshooter"
The "deselect pip" solution did not work for me.
My Python 3.4.1 install was failing with the same "A program run as part of the setup did not finish as expected" error. I tried both installing it on top of Python 3.4.0 and installing it in a new folder, but got the same error. I tried uninstalling Python 3.4.0 first, but got the error during the uninstall, as well.
I ran that Microsoft utility, which helped me uninstall 3.4.0, and was then able to install 3.4.1 cleanly. The utility has options for both problematic installs and uninstalls, so it may help even if you're doing a new install, not an upgrade.
I'm running 64-bit Windows 7, but was working with 32-bit Python versions.
I had similar issues with Python 3.4x on Windows 8.1. Even after a successful install, the uninstaller would fail in the same way. Ultimately, "Method 1" at the MS forum solved this for me when I ran Microsoft's (Un)installer Fix It.
I also had the problem that pip couldn't be installed like #ChrisPosser.
So I deselected pip and the installation went fine. afterwards I restarted the setup, chose "change python" and installed pip. now everything worked like expected.
If you have any problems with windows installers I recommend activating the verbose log like this:
msiexec /i python-2.7.10-1.609.2.msi /lv install-python.log
From the logs I could see that it was the pip install, which was not working.
Yes, I faced the same issue, and was working on this for the past one hour. Was trying to uninstall the Python 3.4.1 from the control panel -> uinstall program -> add/remove program, but was facing issues.
This trick worked for me:
Manually deleted the 3.4.1 folder, which was present in my C folders after I installed the 3.4.1
Then I followed these steps:
-> Went to Regedit.exe, checked in both HKEY_CURRENT_USER, HKEY_LOCAL SOFTWARE Folder, and deleted the Python folders there.
-> windows 8 -> Downloads -> 3.4.1 msi setup (Glad I never deleted it)
-> Right clicked on the msi setup and choose the repair option
-> The repair would re install the Python 3.4.1
-> After this, I un-installed the Python 3.4.1
-> Then I deleted the 3.4.1 msi setup.
Rebooted the system, and now, there is no instance of Python 3.4.1 in my system.
According to me when environment variables containing name 'Python' are created they somehow becomes related with python. I was unable to open idle (GUI PUTHON) and to uninstall it . Deleting a variable named 'PYTHON PATH' solved my all python related problems.
I had 3.7.4 and wanted to move to 2.7.13.
I uninstalled 3.7.4
Tried to install 2.7.13 but got the same error.
There was a 2.7.10 installer(not msi) also present, uninstalling which gave the same error.
So I downloaded 2.7.10 msi, installed it, and then just installed 2.7.13 from the downloaded msi and it worked fine. This overwriting worked because the major version i.e. 2.7 was same for both.
I don't know if this is helpful but after the hours I spent on this, I wanted to write out what worked for me.
Yup, I have already installed another version of python. I have uninstalled them using Program features. But still the same issue persisted because of the folder which was present in my C: drive. After deleting them manually, the installation got completed without errors
I faced this issue because of 2 conflicting versions of 7zip. Removing them both and installing just one fixed this issue.
I had python3.4 installed, then added 3.5, and deleted 3.4. That was a mistake. In trying to get a library to work, I had to go back to 3.4. I uninstalled 3.5, but couldn't uninstall 3.4 (folder deleted).
I ended up searching the registry in rededt32 for "python". There was a Guid folder with a number of entries that had c:\python34 and one more related to the same folder that I deleted. After this, the install worked correctly.
Windows 10.
Mine was linked to having installed an older version in the past, only for my own user account. I got around it by telling the installer to install Python for all users.
For me none of the suggested fixes worked for me. However checking the option "Install just for me" instead of "Install for all users" (Windows 10) worked for me. So this might be another option to try.
I am new to Mac, have always used windows and I am confused on how to install wxPython. I downloaded the .dmg file from the website, and it contained three files:
a pkg file, a readme, and an uninstall.py
I opened the pkg file, went through the steps, and Im not sure where it installed after it said "Installation Complete"
Also, I did the import wx in idle, which caused a stacktrace error.
Thanks.
From personal experience on installing wxPython on both Windows 7 and Mac OSX, I found restarting the computer helps out after installation and stacktrace errors appearing in the Shell upon 'import wx'. Sounds simple enough, but it worked for me. If no errors appear after 'import wx', that means wxPython installed correctly. To add to bouke's answer above, the current way to install Python 2.7 via homebrew in Terminal:
brew install python
To install wxPython:
brew install wxpython
At least for development, I would suggest to install (python and) wx using homebrew. It will install version 2.9 and you're ensured that Apple-provided system libraries remain untouched.