I have install xampp in my windows 7.
It's htdocs folders gone read only. And when try to remove it I can't.
I have tried both gui and cmd commands for unset read only attribute but it restore after changing. what shoul I do?
My images not shown in my local websites because of lack of permission.
here is chrome image for showing image:
Not allowed to load local resource: file:///C:/xampp/htdocs/pkhodro/web/img/brands/29ba0808a95e9497aef33b4da8fb9cbc.jpg
I am developing a rather basic CMS locally and can not ftp due to permissions problems. I have FileZilla FTP server running in XAMPP and can connect without problems but receive error "550 Permission Denied" when my code tries to upload via ftp.
I tried changing permissions via my FileZilla FTP client but without success (presumably because it is windows- error: "504 Command not implemented for that parameter"). I also tried going to the target folder's properties --> security --> permissions and checking "full" for the user XAMPP is running under.
So how do I setup the permissions to allow my CMS to use ftp in XAMPP?
Finally figured it out. For anyone else who has this problem, there is no need to set permissions in Windows. Instead, on the FileZilla FTP server admin interface select edit --> users --> shared folders and check 'write'.
For a fix of this make sure that the root folder is allowed to write and pass rights permission. had this same issue for a script to run on local web xampp server windows xp.. just change the root file attributes to 755 then try it if that don't work try 777. should work now... hope this works for you... as it did me.
If that does not work go to your htdocs folder in your xampp directory then right click it and check properties .. if read only is ticked .. untick it and apply to all sub folders and files
You're behind firewall? Try to allow FileZilla server program in Firewall.
Ok, so I need to download files from my server since they are files that users upload. The reason I am using FTP with WAMP is just so I can test my script on my computer. Once I get it working, I can change the config files once the app is uploaded to a web server. I am using FileZilla.
MY application installation folder:
W:\wamp\www\idealeffort
The above directory is also set as my FileZilla user's home directory. There is a folder in my application called "_resumes". These are the files that I will need to download. So here is the script that I use to download these files.
$this->load->library('ftp');
$this->ftp->connect();
$this->ftp->download('/_resumes/'.$app['resume_filename'], FCPATH.'_resumes/'.$app['resume_filename']);
$app['resume_filename'] is a database result. I have checked to make sure that the file exists. I get the error "Unable to download the specified file. Please check your path."
Any ideas?
Note: FCPATH displays as "W:\wamp\www\idealeffort\ "
If you check codeigniter help
you have to give path from /public_html/....
So i think its problem with path.
Hope this helps
I installed XAMPP and started apache service. then i created myprograms folder inside "htdocs" and make a php program (firstphp.php) but when i open localhost/myprograms/firstphp on a browser then it shows "object not found" 404 error.
it means that you XAMPP server is not running. You can run it by going to your start button and look for it on the previewed applications. You can also go to your XAMPP folder (default C:/xampp) the look for the xampp_start which is located below if ever your files are set in alphabetical order.
I've read other questions regarding this topic. The listed solutions haven't worked.
Installed:
XAMPP 1.7.7
Netbeans 7.1.1
XDebug 2.1.4
phpinfo() shows that Xdebug is installed with all the correct parameters:
zend_extension = C:\xampp\php\ext\php_xdebug-2.1.4-5.3-vc9.dll
xdebug.remote_enable = on
xdebug.remote_handler = "dbgp"
xdebug.remote_host = "localhost"
xdebug.remote_port = 9000
However, when I start a Netbeans debug session, it cycles for awhile with no effect. When I stop it, I get the Info box informing me that "No connection from xdebug was detected with in nn seconds. The reasons could be that xdebug is not installed or not properly configured. (their emphasis).
As far as I can tell, I configured everything correctly, restarted the Apache server and it still doesn't work. I'm at a total loss on how to proceed. Any help is appreciated.
Can you believe it!? After spending literally HOURS researching this problem, I finally found the cause which I can only classify as a bug. Now, how do I report a bug? That's the next question.
Here's a summary:
create PHP project and setup NetBeans project site root to subfolder.
(In order to not register for Apache new test site for any new task I
put every new task into subfolder under my local test domain, e.g.
http://test.my/project3/ ). NetBeans will not start debugging session
automatically in this case. You will see a ‘waiting for connection’
message from the image below. Do not worry. Left it as it is. Go to
your browser. I use FireFox 4. And call the script you wish to debug
with additional parameter, e.g.
http://test.my/project3/index.php?XDEBUG_SESSION_START=netbeans-xdebug
When you return to NetBeans you will see that connection with xdebug
is established successfully. To stop XDebug session manually call any
script from the same subdirectory with this parameter
?XDEBUG_SESSION_STOP_NO_EXEC=netbeans-xdebug
The complete solution can be found on my newest hero's blog NetBeans 7.0 for PHP Waiting for Connection to XDebug
Edit: Know what I just discovered? I removed index.php as the index file of my run configuration. Works like a charm without having to manually insert the xdebug section of the url.
I just ran into this with Netbeans 8 and while your answer worked around my problem I think I found the solution that will fix it forever.
Project Properties => Run Configuration => Advanced ...
Ensure that the following entry is selected
Debug URL: 'Default: YOUR URL'
Mine was set to "Do Not Open Web Browser" .....
Now it works as it used to work many months ago :)
I am a .Net programmer and very new to PHP. Recently I was trying to host an open source PHP application on my machine(Windows). After the Struggle for 5-6 days I will list the steps which worked for me.
I uninstalled every previous installations of XAMPP and NetBeans and proceeded with fresh installations.
This might not be the solution for everyone but it worked for me and I hope it helps someone.
install XAMPP
install netbeans for PHP.
Open IIS and stop it. It is running on port 80 by default.(I am running XAMPP on port 80 i.e. default, Running on other port might need additional configuration settings)
Open XAMPP control panel and start Apache. If port 80 is free no problem should arise.
Open localhost in browser in should display XAMPP home page.
open phpinfo() link on the left pane and copy all the contents on page. Go to: http://xdebug.org/wizard.php and paste all the content in TextBox and click Analyze my phpinfo output. It will diplay you the Xdebug file suitable for your configuration.
Download the given Xdebug dll and copy it in C:\xampp\php\ext (Xampp being the default Xampp installation directory)
Goto XAMPP control panel, click on Config button in front of Apache and select php.in,
Find line similar or exacly like,
;zend_extension = "C:\xampp\php\ext\php_xdebug.dll"
(Semicolon means it is commented)
Remove the semicolon and replace the path with the path of dll you just copied like:
zend_extension = "C:\xampp\php\ext\php_xdebug-2.3.2-5.4-vc9.dll"
Similarly find lines
;xdebug.remote_enable = 0 ;xdebug.remote_handler = "dbgp"
remove semicolons in front of both lines and make remote_enable = 1
xdebug.remote_enable = 1 xdebug.remote_handler = "dbgp"
Restart Apache server.
Copy your website code under C:/XAMPP/htdocs/(your_website)/ that means your index.php should be at C:/XAMPP/htdocs/(your_website)/index.php
Open Netbeans select New project -> PHP -> PHP project from existing source and select the folder you just copied in htdocs folder. Set it to run on Local web server.
Set a breakpoint on first line of index.php and debug.
That's it.
Additional settings were suggested on various different posts but above mentioned steps worked perfectly for me.
I think what you might be missing is
xdebug.idekey=netbeans-xdebug
this is the settings I use in my php.ini
xdebug.remote_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_host=127.0.0.1
xdebug.remote_connect_back=1 # Not safe for production servers
xdebug.remote_port=9000
xdebug.idekey=netbeans-xdebug
xdebug.remote_autostart=false
Read the installation of XAMPP 1.7.7 & Netbeans 7.1 with edditing
the php.ini file as suggested:
http://netbeans.org/kb/docs/php/configure-php-environment-windows.html
Create your PHP project in the local XAMPP directory, c:\xammp\htdocs\*yourproject*
Debug the index.php, you will see that your browser will start with additional parameters:
http://*yourproject*/index.php?XDEBUG_SESSION_START=netbeans-xdebug
Go to your Netbeans, your debugger will be started.