I have a Github account with multiple projects.
I have cloned these projects to my windows 10 computer using ssh key.
some time later, it appear my ssh keys were compromise so i delete my ssh on Github and locally, then regenerate new ones :
4096 bits
rsa2
saved the pub as ~/.ssh/git_id_rsa.pub
add the pub key to my Github ssh keys
saved the priv as ~/.ssh/git/git_id_rsa.ppk
converted to Openssh format as ~/.ssh/git_id_rsa
the fact is I want different ssh keys for my different web tools (one for GitHub, one for DigitalOcean, one for OVH cloud, etc...) and I want to specify witch key to use when connecting to each host. thats why I change the default name for the ssh generated with PuttyGen (and converted with the same).
I don't have passphrase on the git_id_rsa.ppk (nor git_id_rsa) keys, as it seems that GitHub dont like them (saw long time ago).
I've configure my (projecytdir)/.git/config like bellow :
[remote "origin"]
url = git#github.com:hdGuild/JenkinsServerOnDO.git
fetch = +refs/heads/*:refs/remotes/origin/*
identityfile= ~/.ssh/git_id_rsa
But when I try a Git Pull, I've got the following error :
git#github.com: Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Following the following answers I've created the ~/.ssh/config file with the following (using OpenSSH key for GitHub), and it works :
Host github.com
IdentityFile ~/.ssh/git_id_rsa
The fact is that if I need the ~/.ssh/config file, why would I need to configure my local git with (projecytdir)/.git/config as I describe it above ?
I would like to configure my local git to use the right ssh key for Github, without having to explain it in my ~/.ssh/config file.
I'm sure it is (again) a configuration problem and I miss something somewhere, but I can't find where.
Please help :)
thank-you
Okay,
As previously, I answer my own question :D
After some more research, I found this post that explain how to specify in Git local config file, the ssh key to use for git sh connection.
The command is simply, in the above explained case, the following while in project directory :
git config core.sshCommand "ssh -i ~/.ssh/git_id_rsa -F /dev/null"
This way, the git_id-rsa will be used by git for ssh connections on this particular project (as it is a local configuration).
Thank-you for reading.
Related
I'm trying to configure git so I don't have to keep authenticating (and also learn a bit more about git).
I had previously been using password-based authentication, which is repetitive to keep typing in my passwords. I followed the steps (using windows) to set up SSH keys in github. I gave my key a specific name, anticipating that I will need more than one SSH key at some point. It doesn't make sense to always have id_rsa for github! I received the email that the key was successfully created, and I used git bash (because windows) to start the SSH client silently and added my private key. But running a git clone gave me this error:
git#github.com: Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
I then had the idea to try it with the default name (id_rsa), rather than my custom name, and of course it works. So my question is how do I avoid this? I don't want the default name to be reserved for github.
You can set up an ssh configuration file to tell the ssh command to use that specific key when connecting to github.
Create the file .ssh/config with the content:
Host github.com
IdentityFile ~/.ssh/github_rsa_key
Assuming that you've named your private key ~/.ssh/github_rsa_key.
Now try connecting to github:
$ ssh git#github.com
You should see:
Hi <your github username>! You've successfully authenticated, but GitHub does not provide shell access.
I'm trying to set up MS WebMatrix to use a Git repository from my siteground hosting account. I created the repository using their cpanel plugin and it tells me that I can clone it using this command
git clone ssh://username#sm3.siteground.biz:18765/home/username/public_html/
I replaced username of course and I created an rsa key using ssh-keygen. In the Webmatrix GUI it just opens a window saying "Clone is in progress" but it doesn't to anything.
And when I run that command in PowerShell, this is the output:
Cloning into 'public_html'...
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Any help is highly appreciated!
EDIT:
I haven't used github before but I'm pretty sure I'm not connecting to it. The repository is on siteground's server I think. Anyway, I couldn't figure it out in PowerShell so now I'm using putty to load the appropriate key and connect using an external git tool (source tree) that doesn't use the same ssh client as PowerShell. That is the solution that's working for me now.
I'll leave this question open as maybe someone comes around and can help with how to set this up using PowerShell.
The missing piece to the Siteground guide is:
Create a blank file in ~/.ssh/ or C:\Users\username\.ssh on your computer. It does not matter what you name it. I named it siteground_dsa. You could also name it id_dsa_siteground.
Copy the private ssh key that you get from siteground.com and paste the whole of it in the this newly created file.
Open Git Bash locally on your computer and run the following command
$ eval ssh-agent -s
Then run the following. Remember to use the filename that you gave it.
$ ssh-add ~/.ssh/siteground_dsa
Now you need to enter the passphrase for the ssh key. You will have defined it when creating the ssh key.
Now you should be logged in and you can run git clone the directory of your wish.
git clone ssh://username#ams14.siteground.eu:18765/home/username/public_html/
To permanently add the SSH key extend ~/.ssh/config with the following and updating server_name and username.
Host server_name
User username
Port 18765
IdentityFile ~/.ssh/siteground_dsa
keep in mind that for Windows operators, you should write eval $(ssh-agent)
eval $(ssh-agent)
chmod 600 file_name
ssh-add C:\Users\username\.ssh\siteground
Then you can easily clone your file into your local server following inserting your passphrase of the SSH key.
GitHub isn't able to authenticate you. Probably your key isn't associated with your GitHub account.
Take a look to GitHub's recommended method
I have a project which uses Git on a remote server. I installed SourceTree for Mac to manage it. I also have a .ssh folder with the private in the root directory where I keep all my projects and the public key is in the server.
I was able to clone the project successfully and even commit+push it back with no problem. Then I ceated a branch in my local repo, added a new file and tried commit+push it. It was committed but the pushing failed with the following error message.
Pushing to git#gitserver:gitbtest
ssh: Could not resolve hostname gitserver: nodename nor servname provided, or not known
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
I'm not sure why this is happening. Is there a way to set SSH keys in SourceTree for Mac? I can't seem to find any option to do so.
Any help to resolve this would be great.
Thank you!
An url like git#gitserver:gitbtest can only work if one have an ssh config file in order to resolve the name gitserver:
$HOME/.ssh/config
Host gitserver
Hostname xxx.xxx.xxx.xxx # IP or full name for gitserver
User git
IdentityFile ~/.ssh/id_rsa
Actually, with such a file, you don't even have to specify the user:
git remote set-url origin gitserver:gitbtest
(You can see an example of that ~/.ssh/config file used in "git public key for more repositories")
I'm able to authenticate, generate, push etc just fine with my SSH keys and Moovweb credentials on my Mac and Linux machines.
However, on my Windows machine, using Git Bash, I get an SSH Permission denied (publickey) error. The error message is below:
$> moov generate 123dsfsdsf nytimes.com
Running environment checks.
Verifying that git is installed...OK
Checking that current 123dsfsdsf directory doesn't exist...OK
Registering project with MoovCloud.
Authenticating with MoovCloud.
Checking for git access...Enter passphrase for key '/Users/firstname.lastname/.ssh/id_rsa':
Enter passphrase for key '/Users/firstname.lastname/.ssh/id_rsa':
FAILED
> Need to upload an ssh key in order to generate a project...
Found the following SSH public keys:
1 ) id_rsa.pub
2 ) new_rsa.pub
Which would you like to use with your Moovweb account? 2
Uploading public key...
Successfully uploaded public key new_rsa.pub as 'firstname.lastname#GGT.local'
You are now ready to push projects to MoovCloud!
Creating project in MoovCloud...OK
Generating files...OK
Cloning project locally.
Enter passphrase for key '/Users/firstname.lastname/.ssh/id_rsa':
Enter passphrase for key '/Users/firstname.lastname/.ssh/id_rsa':
Cloning into '123dsfsdsf'...
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
ERROR: Error cloning git repo: exit status 128
Please try cloning the repository (git clone moov#git.moovweb.com:firstnameglastname/123dsfsdsf.git) again later.
Try 'moov help generate' to find out details.
Seems like a Windows-specific SSH error. Any workarounds?
So as mentioned in prior answers, the Permission denied error in Windows is because you are trying to use a key other than id_rsa.
Windows lacks the bells and whistles that Linux and Mac have to try out all your public keys when trying to connect to a server via SSH. If you're using the ssh command, you can tell it which key to use by passing the -i flag followed by the path to the key to use:
ssh -i ~/.ssh/moovweb_rsa moov#git.moovweb.com
The above command should work just fine if you've uploaded moovweb_rsa.pub to the console (either via the moov login command or the console UI). However, trying any git related commands should fail because Git doesn't give you the ability to chose which key to use when connecting to the git remote. Because of this, SSH is forced to use the default key, id_rsa, and if that key doesn't work (or doesn't exist), then the connection fails with a permission denied error.
One possible solution, as suggested in other answers, is to simply rename your key to id_rsa. For most people, this is a fine solution. However, if you already have an id_rsa key and you would prefer to use a different key with Moovweb, you can edit your ~/.ssh/config file by adding the following contents:
Host git.moovweb.com
IdentityFile ~/.ssh/moovweb_rsa
If you append the above lines to your ~/.ssh/config file (create it if it doesn't exist), you should be able to successfully get Git to communicate with the Moovweb remote git server. The config basically tells SSH that for the given host (git.moovweb.com), SSH should use the given key rather than the default.
It's worth nothing that this happens to all Git remotes; interactions with Github, Heroku, etc... also suffer through this problem in Windows. You could easily extend your ~/.ssh/config file to use separate SSH keys for each one of those services if you so desired:
Host git.moovweb.com
IdentityFile ~/.ssh/moovweb_rsa
Host github.com
IdentityFile ~/.ssh/github_rsa
Host heroku.com
IdentityFile ~/.ssh/heroku_rsa
Quick & dirty solution: use only the default id_rsa.pub key
Some notes:
make sure you enter the right passphrase to id_rsa.pub
do not use your other key, new_rsa.pub
It turns out that Windows Git Bash doesn't quite come with all the cool utilities Mac/Linux users are used to. Specifically, you don't have ssh-agent running to help handle multiple keys. Without ssh-agent, the git command only seems to use the default id_rsa.pub key.
You can verify this is an SSH/Windows issue following Github's awesome SSH troubleshooting guide. You'll get a Permission denied (publickey) no matter which SSH/Git server you try to connect to.
I have tried following how-set-up-your-own-private-git-server-linux and private-remote-git-repositories-ubuntu-linode but I am still having problems.
My local environment is windows and my remote linux. I have a couple of questions:
In the first article it describes setting up a public ssh key for the server - I've never done this before and I'm not sure where to type the commands (not even sure whether local or remote!!): ssh myuser#server.com mkdir .ssh and scp ~/.ssh/id_rsa.pub myuser#server.com:.ssh/authorized_keys
On my local dev machine should I be running msysgit? Is there an alternative because the version I installed is taking up 1.4 GB! I installed msysGit-netinstall-1.7.4-preview20110204.exe from http://code.google.com/p/msysgit/downloads/list
I tried skipping making the git user and public key, created the repositories on the remote machine but then when I try git remote add origin ssh://[username]#[domain/ip/hostname]/srv/git/[project-name] as root user it says: fatal: Not a git repository (or any of the parent directories): .git
I'm not sure if this should be here or if it would be best migrated over to a different site, but since I might be able to help I'll go ahead and answer.
I just skimmed the articles you linked. It looks like they both deal with accessing a git server over ssh, which you mention, so that's what I'll focus on.
First, on your server:
You need to set up an account on the server so that you can log in. This can be either a generic git account, or your own personal account. For the moment we'll assume that you are setting it up to work with a personal account. What you want to do is create your account, then somewhere accessible to that account (say, in your home directory), create the git repository.
mkdir myrepo.git
cd myrepo.git
git --bare init --shared=all
So now you have a git repository up on the server. Depending on the git client you are using, you might not need to mess with keys right now. If SSH is configured on your server to allow password login then you can probably just connect and enter your password when you need to interact with the server. If you want to set up keys, what you need to do is to generate an ssh public key. I don't know off hand how to do this in windows, but in linux you'd do something like:
ssh-keygen -t rsa -b 1024
That command will generate two files, "id_rsa" and "id_rsa.pub"; whatever tool you use should also generate two files, a public key and a private key. They might have different names, but assume for now that "id_rsa.pub" is the name of your public key file.
You want to copy the public key to the server, you can use scp, ftp, or just move it over using a thumbdrive. Either way, once you get it onto the server, and it's accessible by your user, log in as your user on the server. You want to add the public key to your "authorized_hosts" file, so after logging in to your account on the server, do this:
cd
mkdir .ssh
cat id_rsa.pub >> .ssh/authorized_hosts
rm id_rsa.pub
Now, from your workstation you need to configure your ssh client to use the private key your generated. Again, I don't know how to do this on Windows and it will probably vary depending on what ssh client you are using, so you'll need to get that information somewhere else.
Next, you need to create your local repository, add some files, and make a commit. Note that you can't clone the remote repository you made yet because there's nothing in there. Once you have some commits made locally, you need to set the remote server in your repository.
If you are using the git command line tools, you can run:
git remote add origin user#yourserver:myrepo.git
If you put the repository somewhere other than your home directory, use the full path:
git remote add origin user#yourserver:/path/to/repo.git
Note that you need the ".git" in there, since your directory name has ".git" as part of the name.
If you are using a GUI tool, then you instead just edit the configuration file for the repository. This will be in the top level of your repository under ".git/config". You'll want to add something like
[remote "origin"]
url = user#yourserver:/path/to/repo.git
fetch = +refs/heads/*:refs/remotes/origin/*
Now that your remote is configured, and you have some commits locally, you can push your master branch up to the server. If you're using the command line use:
git push origin master
Or, if you're working on a different branch:
git push origin mybranch
If you are using a GUI frontend for get then you'll need to look up the documentation for that tool on how to push.
I would like to recommend to use Gitolite that allows to setup git hosting on central srever with great features like access control and creating/managin repositories etc.
And for windows, the tool called git-scm can be used for setting up git client and also have GUI panel for git repositories. After installation of this git tool, you will get a git bash tool and a git GUI.
Gitolite makes settting up of a git hosting server and client very simple.
I hope this may help new people who are looking for an efficient solution for settting up git hosting server and clients in some easy to understand simple steps.
I followed the most voted answer and I didnt get it to work. I found this tutorial:
https://www.digitalocean.com/community/tutorials/how-to-set-up-ssh-keys--2
and I got it working. I think the problem was that, in the server, the public key is to be copied to a file "authorized_keys" and not "authorized_hosts".
I had been trying to generate the key pairs using putty but couldn't get it to work. In the end I realised that I could generate the keys via the msysgit command line using ssh-keygen -C "git#example.com" -t rsa. Copy the public key to the server using nano /home/git/.ssh/authorized_keys and hey presto!
I had downloaded the full source code hence the size! The non-source app, Git-1.7.4-preview20110204.exe was just 13MB via http://code.google.com/p/msysgit/downloads/list?can=3