I'm going crazy - when I launch the app on a real device, I'm getting Unable to find module for DevMenu and the whole app is frozen on the splashscreen. I have seen this which alludes that if I turn off remote debugging, it could fix it, but the app is completely unresponsive, so when I shake it, the Expo options don't show up.
When I launch it on a simulator, I see the error, but it's not fatal. Again, I can not seem to open the Expo menu anymore on the simulator to test if it is the remote debugger causing the issue. But the app runs fine on the simulator, other than that.
What is the error Unable to find module for DevMenu and how can I fix it?
Real device:
Simulator logs:
I had the same problem. What solved it was to install expo-dev-menu :
npm i expo-dev-menu
And importing it in my App.js.
import 'expo-dev-menu';
Hope it helps!
Related
I recently upgraded some Firebase packages in my iOS Xamarin app, and now the thing refuses to work. The app opens (shows a splash screen) and immediately closes without producing an error.
While I want to fix the package problem, I have no clue where to start. I set a breakpoint on the App.xaml.cs constructor, but this never gets hit when I run the iOS version. So my next idea was to read the output like I do on Android.
I've been Googling around for a few hours, and everyone seems to say 'Go to Debug > Open System Log...', but this is absolutely rubbish! The system log seems to show everything except for my app running... (E.g. I run the app in the simulator, reload the system logs, and the freshest thing is from 10 minutes ago...)
I'm at my wits end here. Does anyone know a trick for viewing my app output in the simulator? Even just an exit code would be useful š„
You could view the logs in these locations:
Mac ā ~/Library/Logs/Xamarin/Simulator.Server
Windows ā %LOCALAPPDATA%\Xamarin\Logs\Xamarin.Simulator
So I upgraded to Xcode 7.3.1 and now my Xcode will build, and deploy my apps (yes every app, even a brand new blank one) to the simulator but the app never launches on the simulator and the debugger never attaches, Xcode just hangs and has to be force quit. I've completely wiped out Xcode and all simulators and re-installed to no avail. I've scoured Stack Overflow and Google trying every piece of advice and still no luck. Anyone anywhere have any idea how to solve this issue? If I downgrade to 7.2.1 I'm able to debug in the simulator just fine.
Let me know if you need more information.
My Apps run just fine on the simulator, and if I try to attach the debugger to a running app it wont and Xcode hangs in the attempt, when attempting to attach this way at least Xcode doesn't have to be force quit.
FYI, I can debug on a device this is only a simulator issue.
I had this same issue, and tried fixing my projects and reinstalled Xcode twice before I was able to get Simulator to crash and give me an error report that called out Cylance. Luckily I have access to administer our Cylance portal, so I was able to work through the issue to narrow down the problem.
Symptoms:
When running an app from Xcode, the Simulator launches but the application does not launch within the Simulator
Trying to stop the application from within Xcode does not work, and generates no messages
Trying to re-run the application from within Xcode generates the following message: āAn instance of āAPPLICATION NAMEā is already running. Choose āStopā to terminate and launch a new instance.ā But pressing Stop does nothing.
Xcode will not quit, and eventually the user must Force Quit to exit Xcode
Within the OS X console, the following messages are displayed:
6/3/16 7:35:38.000 PM kernel[0]: AMFI: com.apple.dt.ins(pid 2239) - [deny-mmap] main process is a platform binary, but mapped executable file is not: /Library/Application Support/Cylance/Desktop/CyMemDef.dylib
6/3/16 7:35:38.000 PM kernel[0]: AMFI: com.apple.dt.ins(pid 2239) - [deny-mmap] mapped file has team identifier XXXX: /Library/Application Support/Cylance/Desktop/CyMemDef.dylib
Resolution:
The problem is caused by Memory Protection being turned on within the policy assigned to the Mac within the Cylance portal.
To resolve the issue, place the Mac into a zone/policy that does not have Memory Protection turned on. Auto Quarantine and Protection Settings can be left on.
During my testing, I was not able to come up with a list of exclusions that allowed me to leave Memory Protection on, so I ended up disabling it completely.
I am trying to debug my watch app. I build and try to run as usual. It says Build succeeded, installing to watch etc. but then, instead of launching my app, it says Finished running app on watch. I've restarted Xcode, reinstalled my app on watch etc. but no avail.
What am I doing wrong?
I've also restarted my Mac, my iPhone and my Watch. It then worked.
I restarted everything and it still didn't work. However, after the restart when I first run the app I received an error: Device doesnāt support wireless sync. With this, after disabling the wifi on the watch, things went back to normal.
From my experience, restarting all devices (iPhone, watch, and mac) sometimes allows the app to build on the watch, but it is very frustrating and a long process for a "maybe."
Especially when I get the Device doesn't support wireless sync. the most consistent solve has been disabling wifi on both the watch and the iPhone. Also, have the iPhone connected directly to the computer with a genuine cord.
Good luck.
Also, if you were using the simulator, stop it and quit the simulator before trying to compile to the real device.
You just have to attach the Xcode debugger to the process which is running on the watch!
Xcode -> Debug -> Attach to Process > "name of your app watch extension"
After that Xcode displays "Running ... Extension on Apple Watch" and you can start debugging
I am having following problem with the location service with IOS on the simulator:
using phonegap 2.2.0 with xcode 4.5.2,
Cordova.plist EnableLocation = YES
navigator.geolocation.getCurrentPosition(myPositionSuccess, myPositionError, {maximumAge: 300000, timeout:10000, enableHighAccuracy : true});
myPositionSuccess is never called, with following error at navigator.geolocation
locationManager::didFailWithError (null)
I just tried it on the simulator. Any Idea?
Exit the simulator & run your app again. Worked for me.
I was having the same error with XCode Version 4.3.2 & cordova/phonegap 2.1.0
The simulator was unable to get my location even when I ran Google Maps in Safari. That led me to the conclusion that it was more than just my project that was at fault.
I am still unable to figure out exactly why restarting the simulator worked, but there is one possible reason.
I usually shut down my Mac without quitting most of my running apps & the "Reopen windows when logging back in" option checked. The simulator, however, is one of the apps i definitely quit. But the last time I shut down, I did not quit it. So, like I said, possible reason.
Hope this helps you.
Another thing may be to check the location setting in your simulator, I believe the default setting is none which means the geolocation will not find anything. If you are running your simulator, go to Debug > Location > City Run or some other choice and then try to use the geolocation function again it should work fine.
I know this is a bit old but I was looking for an answer on this when I remembered the location setting so I figured I would post here for future reference in case anyone needs it.
I keep getting this error when launching my app on the iOS Simulator:
Couldn't register com.mycompany.MyApp with the bootstrap server. Error: unknown error code.
This generally means that another instance of this process was already running or is hung in the debugger.
I've read other reports of this error and it seems there is no obvious fix for it (restarting the iOS Simulator, restarting Xcode etc..)
At this point here's a list of things I've tried:
Restarting the Simulator
Restarting Xcode
Rebooting my machine
Deleting my app's Derived Data, and Cleaning
Deleting the iOS Simulator App Support directory
Reverting to a 2 weeks old version of the app (which was working 2 weeks ago)
Deleting the application in the Simulator (by clicking-holding on it and hitting the X button)
Upgrading Xcode form 4.1 to 4.2, and running the app both in iOS Simulator 4.3 and 5.0
Nothing worked, I still get the same bootstrap error.. Any (and at this point I really do mean ANY) suggestion would be appreciated.
Edit: Just wanted to add that the app runs fine on a device. I only get this error on the simulator...
As the GDB said:
This generally means that another instance of this process was already running or is hung in the debugger
So find out it and kill it. ;)
I restarted the mac, and it run successfully.
Tip: Well, this may be not work sometimes, so I strongly suggest that you press cmd+. to make sure that you do have stopped the simulator (or device). I find that in most cases the simulator (or device) will not stop exactly when it crashes. I rarely met this issue again with pressing the cmd+. every time it crashes or even just normal exit. Hope this will be helpful. :)
I just closed my xcode & restart my device(ipad2) and it works for me :)
You can try this :: Couldn't register with the bootstrap Server
Another solution, go to clear the memory of the iphone simulator
Simulator > recovery content and setting
then run the program again.
i just change the identifier and the app can work again.
I had to change my bundle identifier finally
No matter you reboot all devices and cleanup all , it gets stuck hard in the debugger..
don't know how to clear it..
As I experienced, device (or simulator) restart does solve the issue,
BUT it would be better not to couse it.
Also my experience is that:
You can find the place of crash by cousing it. In such time developers usually press "STOP the running scheme" this could cause zombie process stuck in device.
BUT
if you press "COUNTINUE program execution", debugger will terminate the process, it will not become a zombie.
I had this error too and I noticed that it works for me if you close the simulator and stop the program and then change your company name.
I don't know why but it works for me.
I opened Activity Monitor and searched for my app name, and found another instance of it listed. I used Activity Monitor to quit that instance, and the problem went away for me.