I have a problem that is my backspace works in the terminal but not in Vim. It sent '^?' instead of '^H' and I have been trying to figure it out. I have checked my .bashrc and there is stty erase '^?' to remove the '^?' but somehow it is not working.
I have this in my .vimrc:
set backspace=indent,eol,start
set backspace=2
fixdel
This is how I would normally fix it according to my knowledge but it doesn't work in this case. I'm using xterm on Arch Linux server if that helps, I know there is a bug for xterm but I don't think that's the case. It works in Unix command but not Vim, so just the Vim that isn't working.
Any help is greatly appreciated.
Edit:
Um to clarify, I just want my backspace to delete things. My backspace doesn't delete things right now and it is giving me ^? instead of deleting. The deleting is the same as any other system that is ^H but I want to make backspace to send ^H which is delete not ^?. So instead of having to type ^H to delete, I want to do it with backspace, on MobaXterm there is a function that makes backspace to send ^H. But how do I do that on SSH?
Thanks
There's two ways to go. To the left, you see the control-H character you crave. The path that way seems clear, just a little
echo xterm.vt100.backarrowKey: true >> ~/.Xresources; xrdb ~/.Xresources
followed by either restarting all of your xterms, or pressing control and your primary mouse button on each window to bring up the menu that lets you change it per window; the menu item itself is the second one in the third section, it's right under the 8-bit controls option. That way seems to be viable. Except, beware, there's a trap door under the control-H itself, as then backspace stops working properly everywhere else except bash itself. Of course, you have part of the way out of that maze already, with your stty fu. But I kind of recall running into all sorts of other issues with that path. One of them being that the Linux console also uses ^? instead of ^H, and that's not so easy to change.
Or, the other way is to get vim to be able to do what you're trying for, using ^?. Which I think is just
:map ^V^? x
Note that I mean control-V backspace, not caret V caret question. You would also want to add this to your ~/.vimrc if that does what you need. That having been said, you didn't say exactly where in vim isn't working quite right, so it's possible you're needing a different tweak instead.
I personally hate having to go down to press the up-arrow-key when I want to repeat a command on the command line.
Is there a way to have map a bash alias to pressing the up-arrow-key? Or something that's also as convenient? I would like to just press 'n' then 'enter' instead of 'up-arrow-key' and then 'enter'
By default, bash uses the emacs keybindings. Ctrl-p and ctrl-n (for previous and next) do the same as up and down arrow.
To view and edit interactively, bash gives you the builtin bind command. help bind shows you usage, and, for example, bind -P shows you all the current bindings. Any remapping you do can be put into your .inputrc file for next time.
Also, bash provides what it calls HISTORY EXPANSION, similar to what was present in older shells. Just type !! and hit enter to execute the previous command. There's an entire section in the documentation with extra features.
Finally, I'll note that if you are repeating commands so often that hitting up-arrow enter is annoying, you might consider writing a script to do whatever you're doing.
You can issue the command set -o vi, or add it to your startup file. Then, you can hit the escape key and use the movement keys from vi to scroll. You can use k to scroll backwards, j to scroll forward, and h and `l' to move left and right.
Is there any way, using Tmux or anything else, to get a terminal that keeps a one-line string of text, a sort of banner, at the top?
In other words, I'm just looking for a way to set the first/top line of my terminal to a string but otherwise have an ordinary terminal.
There is no feature in tmux as such but you can get what you want by using a combination of terminator and tmux.
I have followed the guidance in Is there any way in the OS X Terminal to move the cursor word by word? and now in terminal I can move cursor word by word.
However, in Vim, I am only able to move backward word by word. I cannot move forward word by word, no matter I set \033f to option+cursor-right or shift+cursor-right. The only workaround I figured out is to go to normal mode and click <w> to move to next word. Any idea about how to fix that? Thanks.
w is not a workaround. It's the primary way to move word by word (see also: W, b, B, e, E). What you want is a workaround that won't help you learn Vim at all.
Some may argue that moving around with VIM native keyboard shortcuts is not a workaround, but for me it sure is both very inconvenient and very inefficient. Especially the part where you need to switch between insert mode and normal mode just to move to the next word.
That's why I came up with a solution based on this answer on SuperUser. The idea is to map input provided by the Terminal.app directly in VIM. The answer on SU shows what to put into your vimrc file for the Home/End keys to work as expected.
My tweaked version below includes the Option+arrow (or Alt+arrow) navigation on words. I've tried to mimic the behavior of Terminal's moving around as close as I could get. So pressing Option+Right (Alt+Right) will move the caret to the next character after the word (as opposed to the last character of the word, which is VIMs w native bahavior).
let tp=$TERM_PROGRAM
if tp == 'Apple_Terminal'
:" map Mac OS X Terminal.app
" map Home/End:
:map <ESC>[H <Home>
:map <ESC>[F <End>
" small 'o' letter in <C-o> means no exit from the insert mode
:imap <ESC>[H <C-o><Home>
:imap <ESC>[F <C-o><End>
:cmap <ESC>[H <Home>
:cmap <ESC>[F <End>
" map Option+Left/Option+Right:
" for this to work you must have the bindings in Settings > Keyboard set
" as follows:
" 'option cursor left' to '\033b'
" 'option cursor right' to '\033f'
:map <ESC>f el
:imap <ESC>b <C-o>b
:imap <ESC>f <C-o>el
:cmap <ESC>f el
endif
As a small, but significant bonus you get Home/End navigation without exiting the insert mode. Tested on 10.8.5.
Let me clear a few things up for you. Bash (the shell program running inside the terminal) has the behavior you are used to. (Using Alt+f to move forward by word, and Alt+b to move backward by word.) This was originally done to be like Emacs. You can use the command
set -o vi
to switch to vim behavior. In this mode, you can use Esc to switch to normal mode, and move around like in vim; then press i to go back to insert mode.
So don't be surprised that Vim isn't trying to act like Emacs. The whole power behind vim lies behind these simple motions.
What is the best way to move around on a given very long command line in the terminal?
Say I used the arrow key or Ctrl-R to get this long command line:
./cmd --option1 --option2 --option3 --option4 --option5 --option6 --option7 --option8 --option9 --option10 --option11 --option12 --option13 --option14 --option15 --option16 --option17 --option18 --option19 --option20 --option21 --option22 --option23 --option24 --option25 --option26 --option27 --option28 --option29 --option30 --option31 --option32 --option33 --option34 --option35 --option36 --option37 --option38 --option39 --option40 --option41 --option42 --option43 --option44 --option45 --option46 --option47 --option48 --option49 --option50
Now I need to move (starting from the beginning or the end of the line) the cursor to --option25 to modify something there.
What is the fastest way to get there? What I usually do is Ctrl-A to get to the beginning and then repeatedly Alt-F to move forward, word by word (or Ctrl-E to go the end and Alt-B to then go backward). But on a long line that takes too much time. There must be a way to search and jump directly to the part I need to modify, e.g. option25?
To be clear, you don't want a "fast way to move the cursor on a terminal command line".
What you actually want is a fast way to navigate over command line in you shell program.
Bash is very common shell, for example.
It uses Readline library to implement command line input. And so to say, it is very convenient to know Readline bindings since it is used not only in bash. For example, gdb also uses Readline to process input.
In Readline documentation you can find all navigation related bindings (and more):
http://www.gnu.org/software/bash/manual/bash.html#Readline-Interaction
Short copy-paste if the link above goes down:
Bare Essentials
Ctrl-b Move back one character.
Ctrl-f Move forward one character.
[DEL] or [Backspace] Delete the character to the left of the cursor.
Ctrl-d Delete the character underneath the cursor.
Ctrl-_ or C-x C-u Undo the last editing command. You can undo all the way back to an empty line.
Movement
Ctrl-a Move to the start of the line.
Ctrl-e Move to the end of the line.
Meta-f Move forward a word, where a word is composed of letters and digits.
Meta-b Move backward a word.
Ctrl-l Clear the screen, reprinting the current line at the top.
Kill and yank
Ctrl-k Kill the text from the current cursor position to the end of the line.
M-d Kill from the cursor to the end of the current word, or, if between words, to the end of the next word. Word boundaries are the same as those used by M-f.
M-[DEL] Kill from the cursor the start of the current word, or, if between words, to the start of the previous word. Word boundaries are the same as those used by M-b.
Ctrl-w Kill from the cursor to the previous whitespace. This is different than M- because the word boundaries differ.
Ctrl-y Yank the most recently killed text back into the buffer at the cursor.
M-y Rotate the kill-ring, and yank the new top. You can only do this if the prior command is C-y or M-y.
M is Meta key.
For Max OS X Terminal you can enable "Use option as meta key" in Settings/Keyboard for that.
For Linux its more complicated.
Update
Also note, that Readline can operate in two modes:
emacs mode (which is the default)
vi mode
To switch Bash to use vi mode:
$ set -o vi
Personaly I prefer vi mode since I use vim for text editing.
Bonus
In macOS Terminal app (and in iTerm too) you can Option-Click to move the cursor (cursor will move to clicked position). This even works inside vim.
Since this hasn't been closed yet, here are a few more options.
Use Ctrl+x followed by Ctrl+e to open the current line in the editor specified by $FCEDIT or $EDITOR or emacs (tried in that order).
If you ran the command earlier, hit Ctrl+r for a reverse history search and type option25 (in this case). The line will be displayed. Hit Tab to start editing at this point.
Use history expansion with the s/// modifier. E.g. !-2:s/--option25/--newoption/ would rerun the second-to-last command, but replace option25. To modify the last ./cmd command, use the !string syntax: !./cmd:s/--option25/--newoption/
Any delimiter may be used in place of / in the substitution.
If editing the previous line, you can use quick substitution: ^--option25^--newoption
Character search. This was mentioned by Pax, and can be done in regular emacs-mode with Ctrl+] for forward search, and Ctrl+Alt+] for backward search.
I recommend the second option. Ctrl+r is really handy and fast, no mucking about with editors, and you see the results before the command is run (unlike the history expansions).
Hold down the Option key and click where you'd like the cursor to move, and Terminal rushes the cursor that precise spot.
I tend to prefer vi editing mode (since those keystrokes are embedded into my spinal cord now (the brain's not used at all), along with the CTRL-K, CTRL-X from WordStar 3.3 :-). You can use the command line set -o vi to activate it (and set -o emacs to revert).
In Vi, it would be (ESC-K to get the line up first of course) "f5;;B" (without the double quotes).
Of course, you have to understand what's on the line to get away with this. Basically, it's
f5 to find the first occurrence of "5" (in --option5).
; to find the next one (in --option15).
; to find the next one (in --option25).
B to back up to the start of the word.
Let's see if the emacs aficionados can come up with a better solution, less than 5 keystrokes (although I don't want to start a religious war).
Have you thought about whether you'd maybe like to put this horrendously long command into a script? :-)
Actually, I can go one better than that: "3f5B" to find the third occurrence of "5" then back up to the start of the word.
Use Meta-b / Meta-f to move backward/forward by a word respectively.
In OSX, Meta translates as ESC, which sucks.
But alternatively, you can open terminal preferences -> settings -> profile -> keyboard and check "use option as meta key"
After running the command once, run fc
It will launch $EDITOR with the previous command, then you can use your regular editor to modify the command. When you save and exit, the file will be executed.
..but, as Pax said - the command line isn't particularly good for editing absurdly long lines - why not make the command into a script?
If you want to move forward a certain number of words, hit M-<n> (M- is for Meta and its usually the escape key) then hit a number. This sends a repeat argument to readline, so you can repeat whatever command you want - if you want to go forward then hit M-<n> M-f and the cursor will move forward <n> number of words.
E.g.
$|echo "two three four five six seven"
$ M-4
(arg: 4) echo "two three four five six seven"
$ M-f
$ echo "two three four| five six seven"
So for your example from the cursor at the beginning of the line you would hit, M-26 M-f and your cursor would be at --option25| -or- from the end of the line M-26 M-b would put your cursor at --|option25
Incremental history searching
in terminal enter:
gedit ~/.inputrc
then copy paste and save
"\e[A": history-search-backward
"\e[B": history-search-forward
"\e[C": forward-char
"\e[D": backward-char
all you need to do to find a previous command is to enter say the first 2 or 3 letters and upward arrow will take you there quickly say i want:
for f in *.mid ; do timidity "$f"; done
all i need to do is enter
fo
and hit upward arrow command will soon appear
It might not be the fastest, but this need to be here, some reading about ANSI cursor movements
ANSI escape sequences allow you to move the cursor around the screen at will. This is more useful for full screen user interfaces generated by shell scripts, but can also be used in prompts. The movement escape sequences are as follows:
- Position the Cursor:
\033[<L>;<C>H
Or
\033[<L>;<C>f
puts the cursor at line L and column C.
- Move the cursor up N lines:
\033[<N>A
- Move the cursor down N lines:
\033[<N>B
- Move the cursor forward N columns:
\033[<N>C
- Move the cursor backward N columns:
\033[<N>D
- Clear the screen, move to (0,0):
\033[2J or \033c
- Erase to end of line:
\033[K
- Save cursor position:
\033[s
- Restore cursor position:
\033[u
(...)
Try putting in the following line of code at the prompt (it's a little clearer what it does if the prompt is several lines down the terminal when you put this in): echo -en "\033[7A\033[1;35m BASH \033[7B\033[6D" This should move the cursor seven lines up screen, print the word " BASH ", and then return to where it started to produce a normal prompt.
Examples:
Move the cursor back 7 lines:
echo -e "\033[7A"
Move the cursor to line 10, column 5:
echo -e "\033[10;5H"
Quickly echo colors codes, to colorize a program:
echo -e "\033[35;42m" ; ifconfig
using option key and using a click the place you want to place the cursor with mouse or touchpad is you are using Mac build-in terminal.
One option is to use M-x shell in emacs. That provides all editing facilities and keystrokes that emacs has, so C-s can be used to search the text option25, for example.
(But I'd still prefer to be in the real terminal shell instead if someone can point me to good search and edit facilities.)
Use the mouse
Sometimes, the easiest way to edit a commandline is using a mouse. Some previous answers give a command to open your current line in your $EDITOR. For me (zhs with grml config) that combination is Alt+e. If you enable mouse in your editor, you can make use of it.
To enable mouse in Vim, add this to your ~/.vimrc
set mouse=a
set ttymouse=xterm2
If you then want to do a text selection in terminal (instead of passing the mouseclick to vim), hold Shift when you click; this is terminal specific, of course.
Sysadmins should not be afraid of the mouse.
In Cygwin, you can activate such feature by right-clicking the window. In the pop-up window, select Options... -> Mouse -> activate Clicks place command line cursor -> Apply.
From now on, simply clicking the left mouse button at some position within the command line will place the cursor there.
first:
export EDITOR='nano -m'
then:
CTRL+X CTRL+E in sequence.
You current line will open in nano editor with mouse enable. You can click in any part of text and edit
then CTRL+X to exit and y to confirm saving.
I made a script to make the command line cursor move on mouse click :
Enable xterm mouse tracking reporting
Set readline bindings to consume the escape sequence generated by clicks
It can be found on github
More info on another post
Will work if echo -e "\e[?1000;1006;1015h" # Enable tracking print escape sequences on terminal when clicking with mouse