I downloaded Hudson, and am trying to install it as a service. I followed the steps from this page, but when I try to start the service, it always fails. I'm not really getting any defined error codes either. If I try to run the service from the command line (using net start) I get the following (unhelpful) message:
The hudson service could not be started.
The service did not report an error.
The install process seemed to work fine, as the hudson service is installed, and all the files are in the new directory, but the service won't start. Has anyone else run into this problem?
As documented on that page, they have a note of...
If a restart fails for some reason, check the output from Hudson, which is stored in the installation directory that you specified.
Is there anything to denote further errors?
Related
I am using wildfly 10.1 in standalone mode and need to use it as a service.
I copied the service files to the bin folder and then installed the service from the command prompt.
This works well, except that it is impossible to stop the service without killing the process using taskkill.
As a fix, I tried replacing
set DESCRIPTION="WildFly Application Server"
with
set DESCRIPTION=WildFly Application Server
in the service.bat file as mentioned here. But this is causing the service not to start. The system log says:
The Wildfly service terminated with the following service-specific
error: Incorrect function.
How can I fix this issue and get the service starting and stoppping normally?
Add System variable JAVA_HOME to System variable and try to start the service. It worked for me.
I'm installing sonarqube on Windows Server 2012.
I have followed the following steps:
Downloaded sonarqube4.4 and extracted to C:\Sonarqube
Downloaded Java JDK 1.7.0_60 and jre 1.7.0_67 as well as jre7
Installed Windows SDK 7 and .NET Framework 4
Navigated to C:\sonar\bin\windows x86-64 and ran StartSonar.bat as an administrator, this ran ok with no output and Ihad to hot ctrl- Z to break
I then ran \windows-x86-64\InstallNTService.bat as an administrator and I am seeing the sonarQube services was launched, but failed to start.
Not sure what the problem is.
I believe you first ran \windows-x86-64\InstallNTService.bat successfully and then StartSonar.bat unsuccessfully (the inverse order of what you describe).
You probably have [this problem]: http://qualilogy.com/fr/wp-content/uploads/sites/2/2013/09/Sonar_ServiceLaunchError2.jpg
Windows could not start the Sonar service on Local Computer.
Error 1067: The process terminated unexpectedly.
In that case, the solution is to change the user/rights to launch the Sonar service: https://qualilogy.com/en/migrate-sonarqube-tomcat-to-windows-service/
Go to the Services window, find the Sonar service, and open the Properties windows to change the user it logs on as to one with sufficient permissions.
I was able to solve this problem by creating a new folder named “Temp” in C:\Windows\System32\config\systemprofile\AppData\Local\
The Log-File will show only
--> Wrapper Started as Service
Cleaning or creating >temp directory C:\Program Files (x86)\SonarQube\sonarqube\temp
<-- Wrapper Stopped
The SonarQube service was launched, but failed to start.
After a long search, I came up to this site http://zen-and-art-of-programming.blogspot.de/2013/03/installing-and-running-sonar-source.html.
Solution:
Navigate to C:\Windows\system32\config\systemprofile\AppData\Local\ and create the directory Temp
2: Set the user rights to full access
3: Run the StartNTService.bat
I downloaded 64-bit zipped version of mongodb for windows, created '/data/db' as instructed.
Now, when I run "mongod" command, I am getting the following error & the mongodb server shuts down automatically.
"ERROR : listen() failed error-10013. An attempt was made to access socket in a way forbidden by its access permissions. "
Please help me to clear the firewall settings in windows to prevent this error & run mongodb.
I was able to fix the error by using the following command : "mongod --bind_ip="127.0.0.1". :)
This error also seems to happen when mongod is already running. On Windows 10, mongod will be listed under Background Processes in the Task Manager if it is running. If it is already running, ending the task should allow you to run mongod again without this error occurring. Also check that it is not running as a service; it may be set to restart automatically.
Also, if you have a docker container running mongodb, you also get this error. If you stop your container(s) running mongodb, then it should start up.
I was able to fix this issue by allowing access for Mongo Db Server Application under firewall settings in my antivirus settings.
After you did the above step,open the cmd as administrator and go to the bin path of mongodb application in your system.
Then run the below command.
mongod
Note : try the above steps only after you tried the below steps
1) https://docs.mongodb.com/manual/tutorial/configure-windows-netsh-firewall/
2)https://www.tomshardware.com/news/how-to-open-firewall-ports-in-windows-10,36451.html
I ran across a similar error which is why I ended up on this thread. For me, my solution was that McAfee Antivirus was blocking MongoDB.
The initial error basically showed that access was denied for mongo:
mongo error
I was able to do a search on the internet and found steps to allow MongoDB to run under McAfee Antivirus software by changing the setting for the app directly.
mcaffee settings
When I located MongoDB in the apps requesting internet access, it was initially set to blocked. I selected the app, clicked on edit and changed it to 'Designated ports'.
mongodb settings changed
Now, I am able to run mongo whether the mongod service is started automatically or if I start it manually in a hyper terminal window.
I created websphere server. I was able to launch my application with it. However after I enable the debugging , the server is not starting. I am getting the following error
"ADMU7704E: Failed while trying to start the Windows Service associated with
server: server1; probable error executing WASService.exe"
On some sites a workaround was to delete server.pid file but I am not seeing any such files in the location.
Please suggest
The first thing to test is to disable the WAS Windows service from Windows Services Panel and then try to start server using command line ie startserver.bat
You run this command from PROFILE_HOME/bin. if this starts fine, you can recreate the service using wasservicecmd
http://www-01.ibm.com/support/docview.wss?uid=swg21397335
If the manual startup fails , please check if any logs created under PROFILE_HOME/logs// Check for any error messages in SystemOut.log, SystemErr.log , native_stderr and native_stdout logs.
PROFILE_HOME is home directory of WAS profile.
VG, opinions are my own and not those of my employer
I am currently trying to deploy smartfoxserver 2X on EC2 using dotcloud. I have been able to detect the private ip of the amazon web instance, and using the dotcloud tools I have been able to determine the correct port. However, I have difficulty installing the server proper via the command line so that I can log into it using the AdminTool.
My postinstall is fairly straightforward:
./SFS2X/sfs2x-service start-launchd
I find that on 'dotcloud push' there is a fair amount of promising output in my cygwin terminal, but the push hangs after saying that the sfs2x-service has been launched correctly, until timeout.
Consequently, my question is, has anyone found a way to install SFS2X on EC2 via dotcloud successfully? I managed to have partial success with SFS Pro, with a complete push to dotcloud, by calling ./jre/bin/java -jar installer.jar in my postinstall. Do I need to do extra legwork and build an installer jar for SFS2X? Is there a way that would be best to do this?
I do understand that there is a standard approach to deployment with SFS2X using RightScale on EC2, however I am interested in deployment using the dotcloud platform.
Thanks in advance.
The reason why it is hanging is because you are trying to start your process in the postinstall, and this is not the correct place to do that. The postinstall script is suppose to finish, if it doesn't the deployment will time out, and then get cancelled.
Once the postinstall script is finished, it will then finish the rest of your deployment.
See this page for more information about dotCloud postinstall script:
http://docs.dotcloud.com/0.9/guides/hooks/#post-install
Pay attention to this warning at the end.
Warning:
If your post-install script returns an error (non-zero exit code), or if it runs for more than 10 minutes, the platform will consider that your build has failed, and the new version of your code will not be deployed.
Instead of putting this in the postinstall script, you should add it as a background process, so that it starts up once the deployment process is complete.
See this page for more information on adding background processes to dotCloud services:
http://docs.dotcloud.com/0.9/guides/daemons/
TL;DR: You need to create a supervisord.conf file, and add it to the root of your project, and add your service to that.
Example (you will need to change to fit your situation):
[program:smartfoxserver]
command = /home/dotcloud/current/SFS2X/sfs2x-service start-launchd
Also, make sure you have the correct dotCloud service specified in your dotcloud.yml in order to have the correct binary and libraries installed for what your smartfoxserver application.