I'm trying to open a silverlight project in Visual Studio 2008 and getting this error.
The project type is not supported by this installation.
Let me tell you I did installed:
VS2008
SP1
Silverlight Tools 3
Silverlight SDK
Silverlight
And they were installed in the sequence they are mentioned here. Still I'm getting the same error.
Adding some more details which might be helpful in identifying the cause:
When I try to create a new silverlight project it gives me error "Object reference not set to an instance of an object". And shows "...project creation failed."
I tried unistalling all of the things and installing them again. It really took a lot of time but didn't solved my problem.
Any help appreciated.
Open the project.csproj file with another editor, delete whatever you find between
<ProjectTypeGuids></ProjectTypeGuids>
I've had the same error when I tried to open a solution which required VB.NET, despite everything (to my knowledge) being C#.
If you've done a full install of VS then try this solution: http://andrewgunn.blogspot.com/2008/03/silverlight-project-type-is-not.html
Let us know how it goes.
Do you know who the silverlight project was created by? If so, then contact them and ask them if they used VS 2008 or if they used VS 2010 beta 1/2 (VS 2010 has a lot more and better support for silverlight so it's probable)
If they used VS 2010, then just go to the microsoft website and download you a copy... it's free(right now)
(and if you'll be doing much silverlight development, I'd recommend downloading it anyway. It has code completion for XAML!)
run devenv /setup
Related
I am trying to open a C# solution that has been generated from a Unity v2020.3.19f project with Visual Studio 2022. Opening it with Visual Studio 2019 works just fine, but there are reasons I'd like to be able to open it with v2022 (such as GitHub Copilot). I did not have issues with this on my previous install of Windows 10.
Upon opening the solution in VS2022, I get the following pop-up prompt for every project in the solution:
Choosing the first option updates the target project to .NET Framework 4.8 and loads the project, but the whole file appears with red lines. When hovering over an underlined bool Property, the error shows as: `CS0518: Predefined type 'System.Boolean' is not defined or imported.
Choosing the second option opens this URL in my browser, prompting me to install .NET Framework 4.7.1 targeting pack (which was already installed via the Visual Studio Installer). When I try to install the .NET Framework 4.7.1 runtime, the installer responds with .NET Framework 4.7.1 or a later update is already installed on this computer. When I try to install the .NET Framework 4.7.1 Developer Pack, the installer allows me to choose from "Repair", "Uninstall", or "Cancel". Repairing has no effect.
I installed both versions of Visual Studio (2019 & 2022) the usual way through the Visual Studio Installer, along with the "Game Development with Unity" workload, which tells me it's installed all dependencies just fine:
Here's what I've tried so far:
Uninstall & reinstall all versions of Visual Studio through the Visual Studio Installer
Uninstall & reinstall Unity, with the Visual Studio module installed through Unity Hub (which just opens the Visual Studio Installer for me to choose which version I want to install)
Regenerate project files through the Unity Editor
Uninstall any references to .NET Framework through the Control Panel
Try reinstalling .NET Framework targeting pack 4.7.1 either from the Visual Studio Installer or manually through the Microsoft SDK website from the prompt
Nothing works for me. Any help on how to make VS2022 stop complaining is greatly appreciated.
Update 1: I found a couple of threads where people suggested simply pressing the Regenerate project files button in "Edit -> Preferences -> External Tools`. This has not helped me.
Update 2: I've tried everything I can possibly imagine, in different orders and different combinations. I even reinstalled Windows 10 to no avail. It's like Visual Studio just doesn't want to accept that the .NET Framework 4.7.1 targeting pack is installed. Please help :(
check this
https://learn.microsoft.com/en-us/answers/questions/733018/visual-studio-2022-cannot-locate-installed-net-fra.html
If you modified the value of ProgramFilesDir(x86), just to modify it back to C:\ProgramFiles(x86) can solve the problem
That is a very interesting problem, my main solution for you to first try is to make sure you are even targeting the correct .net framework in UNITY before you even build the solution. You are using the .NET 4.x, you need to go into your configuration settings and player settings in unity and ensure its not on a different version, for me, unity still defaults to .net standard 2.0. Follow the steps located here. To do so.
Another solution is to see if that first option actually gives you errors that prevent you from using unity, because I know that Visual Studio Code has problems occasionally where it tells me im wrong, my program is wrong, every life choice I have made was poor and I am poor, yet in unity, there are no errors showing in the console and I can hit play no problem. In that case I just had to rebuild a few times and fiddle with vs code until omnisharp stopped yelling at me.
Apperently I have been in a similar situation as when you were getting the error "Predefined type 'System.Object' is not defined or imported" because looking into it, I already have clicked on some of the links, try this one if that error persists. If you cannot prevent the errors to begin with, I would recommend you trying to fix the upgraded version from option one as that is more than likely going to get you the closest to a solution.
When I installed the dreamspark provided VS2013 Professional years ago I hadn't thought I would use c++ so I think I unchecked some things about c++ that I actually don't remember.
I don't have VS2013 Installer right now
Now, I've got a MFC application and when I try to compile it, throws an error saying afxwin.h No such file. And when I search in the files there isn't any file with that name.
I searched in SO and I found only posts saying you can't compile if you use VS Express but that's not my case. What should I do or download?
Anyone can help I'd be thankfull.
You have to install the VS2013 tools.
I'm having this error pop up once I start Visual Studio professional 2013 with update 3.
I don't know whats going on and also when I created a web form and try to put items from the toolbox into a table in my code it doesn't let me. the items are dim and can't select them any more. before I would make a table and try to add Labels, textbox, etc and it wasn't a problem.
Visual Studio 2013 Update 4
Tools -> Extensions and Updates
Disabled "Release Management for Visual Studio 2013 v2.1".
That worked for me.
I got the same issue today, but the error message should be giving you some guidance.
Take a look at mine, it tells me to check the "ActivityLog.xml" for more information.
After looking at the entry my error showed me that it ocured the evening before around 5:30pm and I know I was installing the Visual Studio 2013 Update 4 at this time. So it seems I had a problem with my Update installation.
(Sorry maybe someone can school me on how to properly load an image for viewing)
So I realized my problem was an install issue I created, yours might be an add-on or something similar that you just updated your Visual Studio with that corrupted your VS.
So a little more researching and asking some buddies at work and we tried doing this step in another SO article, which should have the same effect of fixing our package loading problem also.
the Provider package did not load.
After running the steps listed there my Visual Studio started up without any obvious issue.
Hope this helps.
Open ActivityLog.xml in a viewer (I've used Microsoft Edge) and you'll find the error. VSPackage is the "Developer Analytics Tools" extension for me.
The error is gone after uninstalling that package. You can obtain the package and attempt to reinstall from the Developer Analytics Tools page in the Visual Studio Gallery.
I uninstalled and reinstalled Visual Studio and the problem went away for a little bit. It eventually came back complaining about different packages.
Then I noticed my home directory was encrypted. I decrypted the directory and the problem went away.
If it is not an encryption issue, I'd try just uninstalling and reinstalling VS 2013.
Message could be shown in case of "Path" environment variable longer than 2048 characters. In that case, system doesn't work proply with system paths like %windir%.
If it's your case, shorten "Path" environment variable and everything works again.
I recently installed Visual Studio 2013 Ultimate version on my machine. I'm just trying to create a sample windows form project and trying to open the designer / form by double clicking on Form1.cs and I'm getting this weird error message:
"the service microsoft.visualstudio.shell.interop.iselectioncontainer already exists in the service container"
My system is already having Visual Studio 2010 which is working smoothly from a long time. I then installed Visual Studio 2012 which was giving the same problem as above. So I went ahead with installing VS 2013 hoping that I might be able to get rid of this issue, but no use.
Once I click OK on the error windows, I can see the following "message" in the bottom Error List window:
"The file 'C:\Users\ABCD\Documents\Visual Studio 2013\Projects\WebSite1\WindowsFormsApplication1\Form1.cs' does not support code parsing or generation because it is not contained within a project that supports code."
I have spent 2-3 days searching various blogs like these, all of which talk about previous version of Visual Studio like VS 2005 / VS 2008:
https://connect.microsoft.com/VisualStudio/feedback/details/311949/the-service-microsoft-visualstudio-shell-interop-iselectioncontainer-already-exists-in-the-service-container
Form inheritance in Visual Studio 2008 doesn't work
I have even tried uninstalling and reinstalling VS 2013, again no use.
It would be really great if someone can help me out in fixing this.
I've just had the exact same error message.
After compiling the solution(F6 or Build->Build Solution) it worked fine for me.
To deal with your issue, please first make sure that you installed latest updates on your Windows 8 machine, and then repair VS2013.
During your repairing process, please temporally turn off your anti-virus/antispyware software and repair VS2013 with the Administrator privilege.
follow this link
The problem got resolved finally, after so many days and various frustrating tries to resolve the issue. I should thank Tim Atkins from Microsoft for helping me with resolving this issue.
Fix: When we tried 'gacutil /l system.design', we found that there were 3 variants of system.design; One from .Net 2.0 targetting MSIL, second from .Net 4.0 targetting x86 and last one also from .Net 4.0, but targetting MSIL.
On a working machine, there were only 2 entries, the .Net 4.0 one targetting x86 wasn't there. Hence we uninstalled this version using gacutil which did the magic. I was so relieved seeing the win forms popping up without any errors anymore :)
I changed the target framework from 4.5 to 4.6.1 and it fixed it for me. My assumption is sometimes when you change target framework back and forth and the process does not go through all the way (cancelling in the middle of changing it) - something happens that leads to this error. Hope that helps
I solved this be closing VS, deleting contents of the .vs folder where my solution is, restarting VS and recompiling.
Seems like one of those file/settings/caching problems that pop up now and then, might be after switching source branch.
VS2019, .net fw 4.6.2.
If your C drive (Where you are installing Visual Studio) does not have enough space, try moving some files from the C drive to another drives.
I just downloaded the Webmatrix 2 Prerelease Beta-
http://www.microsoft.com/web/gallery/install.aspx?appid=webmatrix&prerelease=true
I played around and made a database with some tables. Then I went to open up Visual Studio 2010 and I was prompted to install some missing components. That all went well except when the plaform installer tried to install ASP Razor 2 Syntax for Visual Studio. I get the following error-
"The product you are trying to install is not supported on your operating system. Click here for more information."
I click, nothing useful comes up. Has anyone seen this and know a solution? Or am I just a little too early and have to wait?
Thanks for your time.
This sounds like a bug in pre-release software. Could you report it here?
https://connect.microsoft.com/webmatrix/Feedback