Related
This question already has answers here:
Flattening nested hash to a single hash with Ruby/Rails
(6 answers)
Closed 8 years ago.
I fetch a JSON document and need to programmatically "flatten" the keys for another third-party service.
What this means is, if my JSON doc comes back with the following:
{'first_name' => "Joe", 'hoffman' => {'patterns' => ['negativity', 'self-sabotage'], 'right_road' => 'happy family'}, 'mbti' => 'INTJ'}
I need to be able to know to create a "flat" key-value pair for a third-party service like this:
first_name = "Joe"
hoffman.patterns = "negativity, self-sabotage"
hoffman.right_road = "happy family"
mbti = "INTJ"
Once I know there's a sub-document, the parsing I think I have figured out just appending the sub-keys with key + '.' + "{subkey}" but right now, don't know which ones are straight key-value and which one's have sub-documents.
Question:
a) How can I parse the JSON to know which keys have sub-documents (additional key-values)?
b) Suggestions on ways to create a string from an array
You could also monkey patch Hash to do this on it's own like so:
class Hash
def flatten_keys(prefix=nil)
each_pair.map do |k,v|
key = [prefix,k].compact.join(".")
v.is_a?(Hash) ? v.flatten_keys(key) : [key,v.is_a?(Array) ? v.join(", ") : v]
end.flatten.each_slice(2).to_a
end
def to_flat_hash
Hash[flatten_keys]
end
end
Then it would be
require 'json'
h = JSON.parse(YOUR_JSON_RESPONSE)
#=> {'first_name' => "Joe", 'hoffman' => {'patterns' => ['negativity', 'self-sabotage'], 'right_road' => 'happy family'}, 'mbti' => 'INTJ'}
h.to_flat_hash
#=> {"first_name"=>"Joe", "hoffman.patterns"=>"negativity, self-sabotage", "hoffman.right_road"=>"happy family", "mbti"=>"INTJ"}
Will work with additional nesting too
h = {"first_name"=>"Joe", "hoffman"=>{"patterns"=>["negativity", "self-sabotage"], "right_road"=>"happy family", "wrong_road"=>{"bad_choices"=>["alcohol", "heroin"]}}, "mbti"=>"INTJ"}
h.to_flat_hash
#=> {"first_name"=>"Joe", "hoffman.patterns"=>"negativity, self-sabotage", "hoffman.right_road"=>"happy family", "hoffman.wrong_road.bad_choices"=>"alcohol, heroin", "mbti"=>"INTJ"}
Quick and dirty recursive proc:
# assuming you've already `JSON.parse` the incoming json into this hash:
a = {'first_name' => "Joe", 'hoffman' => {'patterns' => ['negativity', 'self-sabotage'], 'right_road' => 'happy family'}, 'mbti' => 'INTJ'}
# define a recursive proc:
flatten_keys = -> (h, prefix = "") do
#flattened_keys ||= {}
h.each do |key, value|
# Here we check if there's "sub documents" by asking if the value is a Hash
# we also pass in the name of the current prefix and key and append a . to it
if value.is_a? Hash
flatten_keys.call value, "#{prefix}#{key}."
else
# if not we concatenate the key and the prefix and add it to the #flattened_keys hash
#flattened_keys["#{prefix}#{key}"] = value
end
end
#flattened_keys
end
flattened = flatten_keys.call a
# => "first_name"=>"Joe", "hoffman.patterns"=>["negativity", "self-sabotage"], "hoffman.right_road"=>"happy family", "mbti"=>"INTJ"}
And then, to turn the arrays into strings just join them:
flattened.inject({}) do |hash, (key, value)|
value = value.join(', ') if value.is_a? Array
hash.merge! key => value
end
# => {"first_name"=>"Joe", "hoffman.patterns"=>"negativity, self-sabotage", "hoffman.right_road"=>"happy family", "mbti"=>"INTJ"}
Another way, inspired by this post:
def flat_hash(h,f=[],g={})
return g.update({ f=>h }) unless h.is_a? Hash
h.each { |k,r| flat_hash(r,f+[k],g) }
g
end
h = { :a => { :b => { :c => 1,
:d => 2 },
:e => 3 },
:f => 4 }
result = {}
flat_hash(h) #=> {[:a, :b, :c]=>1, [:a, :b, :d]=>2, [:a, :e]=>3, [:f]=>4}
.each{ |k, v| result[k.join('.')] = v } #=> {"a.b.c"=>1, "a.b.d"=>2, "a.e"=>3, "f"=>4}
I wrote a method to split a hash into two hashes based on a criteria (a particular hash value). My question is different from another question on Hash. Here is an example of what I expect:
h={
:a => "FOO",
:b => "FOO",
:c => "BAR",
:d => "BAR",
:e => "FOO"
}
h_foo, h_bar = partition(h)
I need h_foo and h_bar to be like:
h_foo={
:a => "FOO",
:b => "FOO",
:e => "FOO"
}
h_bar={
:c => "BAR",
:d => "BAR"
}
My solution is:
def partition h
h.group_by{|k,v| v=="FOO"}.values.collect{|ary| Hash[*ary.flatten]}
end
Is there a clever solution?
There's Enumerable#partition:
h.partition { |k, v| v == "FOO" }.map(&:to_h)
#=> [{:a=>"FOO", :b=>"FOO", :e=>"FOO"}, {:c=>"BAR", :d=>"BAR"}]
Or you could use Enumerable#each_with_object to avoid the intermediate arrays:
h.each_with_object([{}, {}]) { |(k, v), (h_foo, h_bar)|
v == "FOO" ? h_foo[k] = v : h_bar[k] = v
}
#=> [{:a=>"FOO", :b=>"FOO", :e=>"FOO"}, {:c=>"BAR", :d=>"BAR"}]
I don't think there is a clever one liner, but you can make it slightly more generic by doing something like:
def transpose(h,k,v)
h[v] ||= []
h[v] << k
end
def partition(h)
n = {}
h.map{|k,v| transpose(n,k,v)}
result = n.map{|k,v| Hash[v.map{|e| [e, k]}] }
end
which will yield
[{:a=>"FOO", :b=>"FOO", :e=>"FOO"}, {:c=>"BAR", :d=>"BAR"}]
when run against your initial hash h
Edit - TIL about partition. Wicked.
Why not use builtin partition, which is doing almost exactly what you are looking for?
h_foo, h_bar = h.partition { |key, value| value == 'FOO' }
The only downside is that you will get arrays instead of hashes (but you already know how to convert that). In ruby 2.1+ you could simply call .map(&:to_h) at the end of call chain.
I'm making a subclass of hash, which I want to be able to populate initially using a hash, i.e.:
class HashSub < Hash
def initialize(old_hash)
...
end
end
a = HashSub.new({'akey' => 'avalue'})
puts a['akey']
>> avalue
Since Hash.new doesn't take a hash, what's the cleanest way to achieve this?
The cleanest, in my experience, is to leave the initializer alone and to rely the class' [] operator:
>> class SubHash < Hash; end
=> nil
>> a = Hash[{:a => :b}]
=> {:a=>:b}
>> a.class
=> Hash
>> b = SubHash[{:a => :b}]
=> {:a=>:b}
>> b.class
=> SubHash
To improve on Denis' answer, you can alias the class method [] to new.
class SubHash < Hash; end
singleton_class{alias :new :[]}
end
SubHash.new(a: :b).class # => SubHash
H = Class.new Hash
a = {a: 2, b: 3}
b = H[ a ]
b.class #=> H
Consider a "person" stored in a hash. Two examples are:
fred = {:person => {:name => "Fred", :spouse => "Wilma", :children => {:child => {:name => "Pebbles"}}}}
slate = {:person => {:name => "Mr. Slate", :spouse => "Mrs. Slate"}}
If the "person" doesn't have any children, the "children" element is not present. So, for Mr. Slate, we can check whether he has parents:
slate_has_children = !slate[:person][:children].nil?
So, what if we don't know that "slate" is a "person" hash? Consider:
dino = {:pet => {:name => "Dino"}}
We can't easily check for children any longer:
dino_has_children = !dino[:person][:children].nil?
NoMethodError: undefined method `[]' for nil:NilClass
So, how would you check the structure of a hash, especially if it is nested deeply (even deeper than the examples provided here)? Maybe a better question is: What's the "Ruby way" to do this?
The most obvious way to do this is to simply check each step of the way:
has_children = slate[:person] && slate[:person][:children]
Use of .nil? is really only required when you use false as a placeholder value, and in practice this is rare. Generally you can simply test it exists.
Update: If you're using Ruby 2.3 or later there's a built-in dig method that does what's described in this answer.
If not, you can also define your own Hash "dig" method which can simplify this substantially:
class Hash
def dig(*path)
path.inject(self) do |location, key|
location.respond_to?(:keys) ? location[key] : nil
end
end
end
This method will check each step of the way and avoid tripping up on calls to nil. For shallow structures the utility is somewhat limited, but for deeply nested structures I find it's invaluable:
has_children = slate.dig(:person, :children)
You might also make this more robust, for example, testing if the :children entry is actually populated:
children = slate.dig(:person, :children)
has_children = children && !children.empty?
With Ruby 2.3 we'll have support for the safe navigation operator:
https://www.ruby-lang.org/en/news/2015/11/11/ruby-2-3-0-preview1-released/
has_children now could be written as:
has_children = slate[:person]&.[](:children)
dig is being added as well:
has_children = slate.dig(:person, :children)
Another alternative:
dino.fetch(:person, {})[:children]
You can use the andand gem:
require 'andand'
fred[:person].andand[:children].nil? #=> false
dino[:person].andand[:children].nil? #=> true
You can find further explanations at http://andand.rubyforge.org/.
One could use hash with default value of {} - empty hash. For example,
dino = Hash.new({})
dino[:pet] = {:name => "Dino"}
dino_has_children = !dino[:person][:children].nil? #=> false
That works with already created Hash as well:
dino = {:pet=>{:name=>"Dino"}}
dino.default = {}
dino_has_children = !dino[:person][:children].nil? #=> false
Or you can define [] method for nil class
class NilClass
def [](* args)
nil
end
end
nil[:a] #=> nil
Traditionally, you really had to do something like this:
structure[:a] && structure[:a][:b]
However, Ruby 2.3 added a feature that makes this way more graceful:
structure.dig :a, :b # nil if it misses anywhere along the way
There is a gem called ruby_dig that will back-patch this for you.
def flatten_hash(hash)
hash.each_with_object({}) do |(k, v), h|
if v.is_a? Hash
flatten_hash(v).map do |h_k, h_v|
h["#{k}_#{h_k}"] = h_v
end
else
h[k] = v
end
end
end
irb(main):012:0> fred = {:person => {:name => "Fred", :spouse => "Wilma", :children => {:child => {:name => "Pebbles"}}}}
=> {:person=>{:name=>"Fred", :spouse=>"Wilma", :children=>{:child=>{:name=>"Pebbles"}}}}
irb(main):013:0> slate = {:person => {:name => "Mr. Slate", :spouse => "Mrs. Slate"}}
=> {:person=>{:name=>"Mr. Slate", :spouse=>"Mrs. Slate"}}
irb(main):014:0> flatten_hash(fred).keys.any? { |k| k.include?("children") }
=> true
irb(main):015:0> flatten_hash(slate).keys.any? { |k| k.include?("children") }
=> false
This will flatten all the hashes into one and then any? returns true if any key matching the substring "children" exist.
This might also help.
dino_has_children = !dino.fetch(person, {})[:children].nil?
Note that in rails you can also do:
dino_has_children = !dino[person].try(:[], :children).nil? #
Here is a way you can do a deep check for any falsy values in the hash and any nested hashes without monkey patching the Ruby Hash class (PLEASE don't monkey patch on the Ruby classes, such is something you should not do, EVER).
(Assuming Rails, although you could easily modify this to work outside of Rails)
def deep_all_present?(hash)
fail ArgumentError, 'deep_all_present? only accepts Hashes' unless hash.is_a? Hash
hash.each do |key, value|
return false if key.blank? || value.blank?
return deep_all_present?(value) if value.is_a? Hash
end
true
end
Simplifying the above answers here:
Create a Recursive Hash method whose value cannot be nil, like as follows.
def recursive_hash
Hash.new {|key, value| key[value] = recursive_hash}
end
> slate = recursive_hash
> slate[:person][:name] = "Mr. Slate"
> slate[:person][:spouse] = "Mrs. Slate"
> slate
=> {:person=>{:name=>"Mr. Slate", :spouse=>"Mrs. Slate"}}
slate[:person][:state][:city]
=> {}
If you don't mind creating empty hashes if the value does not exists for the key :)
You can try to play with
dino.default = {}
Or for example:
empty_hash = {}
empty_hash.default = empty_hash
dino.default = empty_hash
That way you can call
empty_hash[:a][:b][:c][:d][:e] # and so on...
dino[:person][:children] # at worst it returns {}
Given
x = {:a => {:b => 'c'}}
y = {}
you could check x and y like this:
(x[:a] || {})[:b] # 'c'
(y[:a] || {})[:b] # nil
Thks #tadman for the answer.
For those who want perfs (and are stuck with ruby < 2.3), this method is 2.5x faster:
unless Hash.method_defined? :dig
class Hash
def dig(*path)
val, index, len = self, 0, path.length
index += 1 while(index < len && val = val[path[index]])
val
end
end
end
and if you use RubyInline, this method is 16x faster:
unless Hash.method_defined? :dig
require 'inline'
class Hash
inline do |builder|
builder.c_raw '
VALUE dig(int argc, VALUE *argv, VALUE self) {
rb_check_arity(argc, 1, UNLIMITED_ARGUMENTS);
self = rb_hash_aref(self, *argv);
if (NIL_P(self) || !--argc) return self;
++argv;
return dig(argc, argv, self);
}'
end
end
end
You can also define a module to alias the brackets methods and use the Ruby syntax to read/write nested elements.
UPDATE: Instead of overriding the bracket accessors, request Hash instance to extend the module.
module Nesty
def []=(*keys,value)
key = keys.pop
if keys.empty?
super(key, value)
else
if self[*keys].is_a? Hash
self[*keys][key] = value
else
self[*keys] = { key => value}
end
end
end
def [](*keys)
self.dig(*keys)
end
end
class Hash
def nesty
self.extend Nesty
self
end
end
Then you can do:
irb> a = {}.nesty
=> {}
irb> a[:a, :b, :c] = "value"
=> "value"
irb> a
=> {:a=>{:b=>{:c=>"value"}}}
irb> a[:a,:b,:c]
=> "value"
irb> a[:a,:b]
=> {:c=>"value"}
irb> a[:a,:d] = "another value"
=> "another value"
irb> a
=> {:a=>{:b=>{:c=>"value"}, :d=>"another value"}}
I don't know how "Ruby" it is(!), but the KeyDial gem which I wrote lets you do this basically without changing your original syntax:
has_kids = !dino[:person][:children].nil?
becomes:
has_kids = !dino.dial[:person][:children].call.nil?
This uses some trickery to intermediate the key access calls. At call, it will try to dig the previous keys on dino, and if it hits an error (as it will), returns nil. nil? then of course returns true.
You can use a combination of & and key? it is O(1) compared to dig which is O(n) and this will make sure person is accessed without NoMethodError: undefined method `[]' for nil:NilClass
fred[:person]&.key?(:children) //=>true
slate[:person]&.key?(:children)
What's the (fastest/cleanest/straightforward) way to convert all keys in a hash from strings to symbols in Ruby?
This would be handy when parsing YAML.
my_hash = YAML.load_file('yml')
I'd like to be able to use:
my_hash[:key]
Rather than:
my_hash['key']
In Ruby >= 2.5 (docs) you can use:
my_hash.transform_keys(&:to_sym)
Using older Ruby version? Here is a one-liner that will copy the hash into a new one with the keys symbolized:
my_hash = my_hash.inject({}){|memo,(k,v)| memo[k.to_sym] = v; memo}
With Rails you can use:
my_hash.symbolize_keys
my_hash.deep_symbolize_keys
Here's a better method, if you're using Rails:
params.symbolize_keys
The end.
If you're not, just rip off their code (it's also in the link):
myhash.keys.each do |key|
myhash[(key.to_sym rescue key) || key] = myhash.delete(key)
end
For the specific case of YAML in Ruby, if the keys begin with ':', they will be automatically interned as symbols.
require 'yaml'
require 'pp'
yaml_str = "
connections:
- host: host1.example.com
port: 10000
- host: host2.example.com
port: 20000
"
yaml_sym = "
:connections:
- :host: host1.example.com
:port: 10000
- :host: host2.example.com
:port: 20000
"
pp yaml_str = YAML.load(yaml_str)
puts yaml_str.keys.first.class
pp yaml_sym = YAML.load(yaml_sym)
puts yaml_sym.keys.first.class
Output:
# /opt/ruby-1.8.6-p287/bin/ruby ~/test.rb
{"connections"=>
[{"port"=>10000, "host"=>"host1.example.com"},
{"port"=>20000, "host"=>"host2.example.com"}]}
String
{:connections=>
[{:port=>10000, :host=>"host1.example.com"},
{:port=>20000, :host=>"host2.example.com"}]}
Symbol
if you're using Rails, it is much simpler - you can use a HashWithIndifferentAccess and access the keys both as String and as Symbols:
my_hash.with_indifferent_access
see also:
http://api.rubyonrails.org/classes/ActiveSupport/HashWithIndifferentAccess.html
Or you can use the awesome "Facets of Ruby" Gem, which contains a lot of extensions to Ruby Core and Standard Library classes.
require 'facets'
> {'some' => 'thing', 'foo' => 'bar'}.symbolize_keys
=> {:some=>"thing", :foo=>"bar}
see also:
http://rubyworks.github.io/rubyfaux/?doc=http://rubyworks.github.io/facets/docs/facets-2.9.3/core.json#api-class-Hash
Even more terse:
Hash[my_hash.map{|(k,v)| [k.to_sym,v]}]
Since Ruby 2.5.0 you can use Hash#transform_keys or Hash#transform_keys!.
{'a' => 1, 'b' => 2}.transform_keys(&:to_sym) #=> {:a => 1, :b => 2}
http://api.rubyonrails.org/classes/Hash.html#method-i-symbolize_keys
hash = { 'name' => 'Rob', 'age' => '28' }
hash.symbolize_keys
# => { name: "Rob", age: "28" }
If you are using json, and want to use it as a hash, in core Ruby you can do it:
json_obj = JSON.parse(json_str, symbolize_names: true)
symbolize_names: If set to true, returns symbols for the names (keys) in a JSON object. Otherwise strings are returned. Strings are the default.
Doc: Json#parse symbolize_names
Here's a way to deep symbolize an object
def symbolize(obj)
return obj.inject({}){|memo,(k,v)| memo[k.to_sym] = symbolize(v); memo} if obj.is_a? Hash
return obj.inject([]){|memo,v | memo << symbolize(v); memo} if obj.is_a? Array
return obj
end
I really like the Mash gem.
you can do mash['key'], or mash[:key], or mash.key
A modification to #igorsales answer
class Object
def deep_symbolize_keys
return self.inject({}){|memo,(k,v)| memo[k.to_sym] = v.deep_symbolize_keys; memo} if self.is_a? Hash
return self.inject([]){|memo,v | memo << v.deep_symbolize_keys; memo} if self.is_a? Array
return self
end
end
params.symbolize_keys will also work. This method turns hash keys into symbols and returns a new hash.
In Rails you can use:
{'g'=> 'a', 2 => {'v' => 'b', 'x' => { 'z' => 'c'}}}.deep_symbolize_keys!
Converts to:
{:g=>"a", 2=>{:v=>"b", :x=>{:z=>"c"}}}
So many answers here, but the one method rails function is hash.symbolize_keys
This is my one liner for nested hashes
def symbolize_keys(hash)
hash.each_with_object({}) { |(k, v), h| h[k.to_sym] = v.is_a?(Hash) ? symbolize_keys(v) : v }
end
In case the reason you need to do this is because your data originally came from JSON, you could skip any of this parsing by just passing in the :symbolize_names option upon ingesting JSON.
No Rails required and works with Ruby >1.9
JSON.parse(my_json, :symbolize_names => true)
You could be lazy, and wrap it in a lambda:
my_hash = YAML.load_file('yml')
my_lamb = lambda { |key| my_hash[key.to_s] }
my_lamb[:a] == my_hash['a'] #=> true
But this would only work for reading from the hash - not writing.
To do that, you could use Hash#merge
my_hash = Hash.new { |h,k| h[k] = h[k.to_s] }.merge(YAML.load_file('yml'))
The init block will convert the keys one time on demand, though if you update the value for the string version of the key after accessing the symbol version, the symbol version won't be updated.
irb> x = { 'a' => 1, 'b' => 2 }
#=> {"a"=>1, "b"=>2}
irb> y = Hash.new { |h,k| h[k] = h[k.to_s] }.merge(x)
#=> {"a"=>1, "b"=>2}
irb> y[:a] # the key :a doesn't exist for y, so the init block is called
#=> 1
irb> y
#=> {"a"=>1, :a=>1, "b"=>2}
irb> y[:a] # the key :a now exists for y, so the init block is isn't called
#=> 1
irb> y['a'] = 3
#=> 3
irb> y
#=> {"a"=>3, :a=>1, "b"=>2}
You could also have the init block not update the hash, which would protect you from that kind of error, but you'd still be vulnerable to the opposite - updating the symbol version wouldn't update the string version:
irb> q = { 'c' => 4, 'd' => 5 }
#=> {"c"=>4, "d"=>5}
irb> r = Hash.new { |h,k| h[k.to_s] }.merge(q)
#=> {"c"=>4, "d"=>5}
irb> r[:c] # init block is called
#=> 4
irb> r
#=> {"c"=>4, "d"=>5}
irb> r[:c] # init block is called again, since this key still isn't in r
#=> 4
irb> r[:c] = 7
#=> 7
irb> r
#=> {:c=>7, "c"=>4, "d"=>5}
So the thing to be careful of with these is switching between the two key forms. Stick with one.
Would something like the following work?
new_hash = Hash.new
my_hash.each { |k, v| new_hash[k.to_sym] = v }
It'll copy the hash, but you won't care about that most of the time. There's probably a way to do it without copying all the data.
a shorter one-liner fwiw:
my_hash.inject({}){|h,(k,v)| h.merge({ k.to_sym => v}) }
How about this:
my_hash = HashWithIndifferentAccess.new(YAML.load_file('yml'))
# my_hash['key'] => "val"
# my_hash[:key] => "val"
This is for people who uses mruby and do not have any symbolize_keys method defined:
class Hash
def symbolize_keys!
self.keys.each do |k|
if self[k].is_a? Hash
self[k].symbolize_keys!
end
if k.is_a? String
raise RuntimeError, "Symbolizing key '#{k}' means overwrite some data (key :#{k} exists)" if self[k.to_sym]
self[k.to_sym] = self[k]
self.delete(k)
end
end
return self
end
end
The method:
symbolizes only keys that are String
if symbolize a string means to lose some informations (overwrite part of hash) raise a RuntimeError
symbolize also recursively contained hashes
return the symbolized hash
works in place!
The array we want to change.
strings = ["HTML", "CSS", "JavaScript", "Python", "Ruby"]
Make a new variable as an empty array so we can ".push" the symbols in.
symbols = [ ]
Here's where we define a method with a block.
strings.each {|x| symbols.push(x.intern)}
End of code.
So this is probably the most straightforward way to convert strings to symbols in your array(s) in Ruby. Make an array of strings then make a new variable and set the variable to an empty array. Then select each element in the first array you created with the ".each" method. Then use a block code to ".push" all of the elements in your new array and use ".intern or .to_sym" to convert all the elements to symbols.
Symbols are faster because they save more memory within your code and you can only use them once. Symbols are most commonly used for keys in hash which is great. I'm the not the best ruby programmer but this form of code helped me a lot.If anyone knows a better way please share and you can use this method for hash too!
If you would like vanilla ruby solution and as me do not have access to ActiveSupport here is deep symbolize solution (very similar to previous ones)
def deep_convert(element)
return element.collect { |e| deep_convert(e) } if element.is_a?(Array)
return element.inject({}) { |sh,(k,v)| sh[k.to_sym] = deep_convert(v); sh } if element.is_a?(Hash)
element
end
Starting on Psych 3.0 you can add the symbolize_names: option
Psych.load("---\n foo: bar")
# => {"foo"=>"bar"}
Psych.load("---\n foo: bar", symbolize_names: true)
# => {:foo=>"bar"}
Note: if you have a lower Psych version than 3.0 symbolize_names: will be silently ignored.
My Ubuntu 18.04 includes it out of the box with ruby 2.5.1p57
ruby-1.9.2-p180 :001 > h = {'aaa' => 1, 'bbb' => 2}
=> {"aaa"=>1, "bbb"=>2}
ruby-1.9.2-p180 :002 > Hash[h.map{|a| [a.first.to_sym, a.last]}]
=> {:aaa=>1, :bbb=>2}
This is not exactly a one-liner, but it turns all string keys into symbols, also the nested ones:
def recursive_symbolize_keys(my_hash)
case my_hash
when Hash
Hash[
my_hash.map do |key, value|
[ key.respond_to?(:to_sym) ? key.to_sym : key, recursive_symbolize_keys(value) ]
end
]
when Enumerable
my_hash.map { |value| recursive_symbolize_keys(value) }
else
my_hash
end
end
I like this one-liner, when I'm not using Rails, because then I don't have to make a second hash and hold two sets of data while I'm processing it:
my_hash = { "a" => 1, "b" => "string", "c" => true }
my_hash.keys.each { |key| my_hash[key.to_sym] = my_hash.delete(key) }
my_hash
=> {:a=>1, :b=>"string", :c=>true}
Hash#delete returns the value of the deleted key
Facets' Hash#deep_rekey is also a good option, especially:
if you find use for other sugar from facets in your project,
if you prefer code readability over cryptical one-liners.
Sample:
require 'facets/hash/deep_rekey'
my_hash = YAML.load_file('yml').deep_rekey
In ruby I find this to be the most simple and easy to understand way to turn string keys in hashes to symbols :
my_hash.keys.each { |key| my_hash[key.to_sym] = my_hash.delete(key)}
For each key in the hash we call delete on it which removes it from the hash (also delete returns the value associated with the key that was deleted) and we immediately set this equal to the symbolized key.
Similar to previous solutions but written a bit differently.
This allows for a hash that is nested and/or has arrays.
Get conversion of keys to a string as a bonus.
Code does not mutate the hash been passed in.
module HashUtils
def symbolize_keys(hash)
transformer_function = ->(key) { key.to_sym }
transform_keys(hash, transformer_function)
end
def stringify_keys(hash)
transformer_function = ->(key) { key.to_s }
transform_keys(hash, transformer_function)
end
def transform_keys(obj, transformer_function)
case obj
when Array
obj.map{|value| transform_keys(value, transformer_function)}
when Hash
obj.each_with_object({}) do |(key, value), hash|
hash[transformer_function.call(key)] = transform_keys(value, transformer_function)
end
else
obj
end
end
end