I have the following line in a plugin to display page views on my Jekyll site:
html = pv.to_s.reverse.gsub(/...(?=.)/,'\& ').reverse
It adds space between thousands, for example 23 678.
How can I add hair space instead of regular space in this string?
In HTML is a so-called decimal numeric character reference:
The ampersand must be followed by a "#" (U+0023) character, followed by one or more ASCII digits, representing a base-ten integer that corresponds to a Unicode code point that is allowed according to the definition below. The digits must then be followed by a ";" (U+003B) character.
Ruby has the \u escape sequence. However it expects the following characters to represent a hexadecimal (base-sixteen) integer. That's 200A. You also have to use a double-quoted string literal which means now the \ character needs to be escaped with another one:
"\\&\u200A"
Alternatively just use it directly:
'\& '
This is a common question, but just can't seem to find the answer without resorting to unreliable regular expressions.
Basically if there is a \302\240 or similar combination in a string I want to replace it with the real character.
I am using PLruby for this, hence the warn.
obj = {"a"=>"some string with special chars"}
warn obj.inspect
NOTICE: {"Outputs"=>["a\302\240b"]} <- chars are escaped
warn "\302\240"
NOTICE: <-- there is a non breaking space here, like I want
warn "#{json.inspect}"
NOTICE: {"Outputs"=>["a\302\240"b]} <- chars are escaped
So these can be decoded when I use a string literal, but with the "#{x}" format the \xxx placeholders are never decoded into characters.
How would I assign the same string as the middle command yields?
Ruby Version: 1.8.5
You mentioned that you're using PL/ruby. That suggests that your strings are actually bytea values (the PostgreSQL version of a BLOB) using the old "escape" format. The escape format encodes non-ASCII values in octal with a leading \ so a bit of gsub and Array#pack should sort you out:
bytes = s.gsub(/\\([0-8]{3})/) { [ $1.to_i(8) ].pack('C') }
That will expand the escape values in s to raw bytes and leave them in bytes. You're still dealing with binary data though so just trying to display it on a console won't necessarily do anything useful. If you know that you're dealing with comprehensible strings then you'll have to figure out what encoding they're in and use String methods to sort out the encoding.
Perhaps you just want to use .to_s instead?
I have these values from a unicode database but I'm not sure how to translate them into the human readable form. What are these even called?
Here they are:
U+2B71F
U+2A52D
U+2A68F
U+2A690
U+2B72F
U+2B4F7
U+2B72B
How can I convert these to there readable symbols?
How about:
# Using pack
puts ["2B71F".hex].pack("U")
# Using chr
puts (0x2B71F).chr(Encoding::UTF_8)
In Ruby 1.9+ you can also do:
puts "\u{2B71F}"
I.e. the \u{} escape sequence can be used to decode Unicode codepoints.
The unicode symbols like U+2B71F are referred to as a codepoint.
The unicode system defines a unique codepoint for each character in a multitude of world languages, scientific symbols, currencies etc. This character set is steadily growing.
For example, U+221E is infinity.
The codepoints are hexadecimal numbers. There is always exactly one number defined per character.
There are many ways to arrange this in memory. This is known as an encoding of which the common ones are UTF-8 and UTF-16. The conversion to and fro is well defined.
Here you are most probably looking for converting the unicode codepoint to UTF-8 characters.
codepoint = "U+2B71F"
You need to extract the hex part coming after U+ and get only 2B71F. This will be the first group capture. See this.
codepoint.to_s =~ /U\+([0-9a-fA-F]{4,5}|10[0-9a-fA-F]{4})$/
And you're UTF-8 character will be:
utf_8_character = [$1.hex].pack("U")
References:
Convert Unicode codepoints to UTF-8 characters with Module#const_missing.
Tim Bray on the goodness of unicode.
Joel Spolsky - The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!).
Dissecting the Unicode regular expression
I need to encode/convert a Unicode string to its escaped form, with backslashes. Anybody know how?
In Ruby 1.8.x, String#inspect may be what you are looking for, e.g.
>> multi_byte_str = "hello\330\271!"
=> "hello\330\271!"
>> multi_byte_str.inspect
=> "\"hello\\330\\271!\""
>> puts multi_byte_str.inspect
"hello\330\271!"
=> nil
In Ruby 1.9 if you want multi-byte characters to have their component bytes escaped, you might want to say something like:
>> multi_byte_str.bytes.to_a.map(&:chr).join.inspect
=> "\"hello\\xD8\\xB9!\""
In both Ruby 1.8 and 1.9 if you are instead interested in the (escaped) unicode code points, you could do this (though it escapes printable stuff too):
>> multi_byte_str.unpack('U*').map{ |i| "\\u" + i.to_s(16).rjust(4, '0') }.join
=> "\\u0068\\u0065\\u006c\\u006c\\u006f\\u0639\\u0021"
To use a unicode character in Ruby use the "\uXXXX" escape; where XXXX is the UTF-16 codepoint. see http://leejava.wordpress.com/2009/03/11/unicode-escape-in-ruby/
If you have Rails kicking around you can use the JSON encoder for this:
require 'active_support'
x = ActiveSupport::JSON.encode('µ')
# x is now "\u00b5"
The usual non-Rails JSON encoder doesn't "\u"-ify Unicode.
There are two components to your question as I understand it: Finding the numeric value of a character, and expressing such values as escape sequences in Ruby. Further, the former depends on what your starting point is.
Finding the value:
Method 1a: from Ruby with String#dump:
If you already have the character in a Ruby String object (or can easily get it into one), this may be as simple as displaying the string in the repl (depending on certain settings in your Ruby environment). If not, you can call the #dump method on it. For example, with a file called unicode.txt that contains some UTF-8 encoded data in it – say, the currency symbols €£¥$ (plus a trailing newline) – running the following code (executed either in irb or as a script):
s = File.read("unicode.txt", :encoding => "utf-8") # this may be enough, from irb
puts s.dump # this will definitely do it.
... should print out:
"\u20AC\u00A3\u00A5$\n"
Thus you can see that € is U+20AC, £ is U+00A3, and ¥ is U+00A5. ($ is not converted, since it's straight ASCII, though it's technically U+0024. The code below could be modified to give that information, if you actually need it. Or just add leading zeroes to the hex values from an ASCII table – or reference one that already does so.)
(Note: a previous answer suggested using #inspect instead of #dump. That sometimes works, but not always. For example, running ruby -E UTF-8 -e 'puts "\u{1F61E}".inspect' prints an unhappy face for me, rather than an escape sequence. Changing inspect to dump, though, gets me the escape sequence back.)
Method 1b: with Ruby using String#encode and rescue:
Now, if you're trying the above with a larger input file, the above may prove unwieldy – it may be hard to even find escape sequences in files with mostly ASCII text, or it may be hard to identify which sequences go with which characters. In such a case, one might replace the second line above with the following:
encodings = {} # hash to store mappings in
s.split("").each do |c| # loop through each "character"
begin
c.encode("ASCII") # try to encode it to ASCII
rescue Encoding::UndefinedConversionError # but if that fails
encodings[c] = $!.error_char.dump # capture a dump, mapped to the source character
end
end
# And then print out all the captured non-ASCII characters:
encodings.each do |char, dumped|
puts "#{char} encodes to #{dumped}."
end
With the same input as above, this would then print:
€ encodes to "\u20AC".
£ encodes to "\u00A3".
¥ encodes to "\u00A5".
Note that it's possible for this to be a bit misleading. If there are combining characters in the input, the output will print each component separately. For example, for input of 🙋🏾 ў ў, the output would be:
🙋 encodes to "\u{1F64B}".
🏾 encodes to "\u{1F3FE}".
ў encodes to "\u045E".
у encodes to "\u0443". ̆
encodes to "\u0306".
This is because 🙋🏾 is actually encoded as two code points: a base character (🙋 - U+1F64B), with a modifier (🏾, U+1F3FE; see also). Similarly with one of the letters: the first, ў, is a single pre-combined code point (U+045E), while the second, ў – though it looks the same – is formed by combining у (U+0443) with the modifier ̆ (U+0306 - which may or may not render properly, including on this page, since it's not meant to stand alone). So, depending on what you're doing, you may need to watch out for such things (which I leave as an exercise for the reader).
Method 2a: from web-based tools: specific characters:
Alternatively, if you have, say, an e-mail with a character in it, and you want to find the code point value to encode, if you simply do a web search for that character, you'll frequently find a variety of pages that give unicode details for the particular character. For example, if I do a google search for ✓, I get, among other things, a wiktionary entry, a wikipedia page, and a page on fileformat.info, which I find to be a useful site for getting details on specific unicode characters. And each of those pages lists the fact that that check mark is represented by unicode code point U+2713. (Incidentally, searching in that direction works well, too.)
Method 2b: from web-based tools: by name/concept:
Similarly, one can search for unicode symbols to match a particular concept. For example, I searched above for unicode check marks, and even on the Google snippet there was a listing of several code points with corresponding graphics, though I also find this list of several check mark symbols, and even a "list of useful symbols" which has a bunch of things, including various check marks.
This can similarly be done for accented characters, emoticons, etc. Just search for the word "unicode" along with whatever else you're looking for, and you'll tend to get results that include pages that list the code points. Which then brings us to putting that back into ruby:
Representing the value, once you have it:
The Ruby documentation for string literals describes two ways to represent unicode characters as escape sequences:
\unnnn Unicode character, where nnnn is exactly 4 hexadecimal digits ([0-9a-fA-F])
\u{nnnn ...} Unicode character(s), where each nnnn is 1-6 hexadecimal digits ([0-9a-fA-F])
So for code points with a 4-digit representation, e.g. U+2713 from above, you'd enter (within a string literal that's not in single quotes) this as \u2713. And for any unicode character (whether or not it fits in 4 digits), you can use braces ({ and }) around the full hex value for the code point, e.g. \u{1f60d} for 😍. This form can also be used to encode multiple code points in a single escape sequence, separating characters with whitespace. For example, \u{1F64B 1F3FE} would result in the base character 🙋 plus the modifier 🏾, thus ultimately yielding the abstract character 🙋🏾 (as seen above).
This works with shorter code points, too. For example, that currency character string from above (€£¥$) could be represented with \u{20AC A3 A5 24} – requiring only 2 digits for three of the characters.
You can directly use unicode characters if you just add #Encoding: UTF-8 to the top of your file. Then you can freely use ä, ǹ, ú and so on in your source code.
try this gem. It converts Unicode or non-ASCII punctuation and symbols to nearest ASCII punctuation and symbols
https://github.com/qwuen/punctuate
example usage:
"100٪".punctuate
=> "100%"
the gem uses the reference in https://lexsrv3.nlm.nih.gov/LexSysGroup/Projects/lvg/current/docs/designDoc/UDF/unicode/DefaultTables/symbolTable.html for the conversion.
I seems to be a very simple and much needed method. I need to remove all non ASCII characters from a string. e.g © etc. See the following example.
#coding: utf-8
s = " Hello this a mixed string © that I made."
puts s.encoding
puts s.encode
output:
UTF-8
Hello this a mixed str
ing © that I made.
When I feed this to Watir, it produces following error:incompatible character encodings: UTF-8 and ASCII-8BIT
So my problem is that I want to get rid of all non ASCII characters before using it. I will not know which encoding the source string "s" uses.
I have been searching and experimenting for quite some time now.
If I try to use
puts s.encode('ASCII-8BIT')
It gives the error:
: "\xC2\xA9" from UTF-8 to ASCII-8BIT (Encoding::UndefinedConversionError)
You can just literally translate what you asked into a Regexp. You wrote:
I want to get rid of all non ASCII characters
We can rephrase that a little bit:
I want to substitue all characters which don't thave the ASCII property with nothing
And that's a statement that can be directly expressed in a Regexp:
s.gsub!(/\P{ASCII}/, '')
As an alternative, you could also use String#delete!:
s.delete!("^\u{0000}-\u{007F}")
Strip out the characters using regex. This example is in C# but the regex should be the same:
How can you strip non-ASCII characters from a string? (in C#)
Translating it into ruby using gsub should not be difficult.
UTF-8 is a variable-length encoding. When a character occupies one byte, its value coincides with 7-bit ASCII. So why don't you just look for bytes with a '1' in the MSB, and then remove both them and their trailers? A byte beginning with '110' will be followed by one additional byte. A byte beginning with '1110' will be followed by two. And a byte beginning with '11110' will be followed by three, the maximum supported by UTF-8.
This is all just off the top of my head. I could be wrong.