I have recently started to received this message.
Unable to start debugging on the web server.
The IIS worker process for the launched URL is not currently running
Does anyone know what this means?
I created my virtual directory via Properties on the project, and clicking Create Virtual Directory. ANd in IIS I can see it, I run VS 2010 with Admin Privs.
The Application pool in .Net 4.0
Any help really appreciated
Thanks
EDIT
I managed to get it working but its a good workaround really. Basically there was another website setup i.e. Default Website where all my apps goes which was started and running.
And there was another website (which was stopped!) that was for installanywhere.. But it was stopped! ... I removed the site completely and now it works
Can vs 2010 not figure out which one to connect to or something?
I presumed if its stopped then it wouldn't try and connect..
Very confused, Anybody know of alternative work around?
I got the same error message after reinstalling VS2010. In my case all application pools in the IIS where remapped to run 4.0, so VS2010 was unable to figure out which pool to attach its self to during debugging. The solution in my case, was to manually delete few pools and remapping my older pools back to .net 2.0. I finally ended up, only having 2 pools pointing towards .net 4.0 (integrated and classic) and 2 pools running .net 2.0 (integrated and classic).
Related
So, at work, we are trying to use NCover Desktop for code coverage on a cloud based azure web application.
We are using Azure SDK V1.8 and Visual Studio 2010.
I researched online for answer and found some article a little bit helpful in setting up environment and stuff. Following is the procedure I'm following for this.
Create new NCover project and select auto config
Reset IIS and detect w3wp.exe process
Start application and select/deselect executable.
Problem is, I think VS is running on localhost rather than IIS, that's why even after restarting IIS, I'm not able to detect w3wp.exe process to attach.
how can I fix this issue?
Any help is appreciated.
EDIT:
So, After pointing our site towards IIS - Following is the error messasge I am getting.
I also tried to change port so there is not conflicts.
All the sudden started getting the following error while trying to debug a worker role:
"Windows Azure Tools for Microsoft Visual Studio
There was an error attaching the debugger to the role instance 'deployment16(360)blah blah' with Process Id: '8780'. Unable to attach. The Microsoft Visual Studio Remote Debugging Monitor has been closed on the remote machine."
Restarting Visual Studio and the machine do not help.
As you start getting this problem all of sudden in your development machine something must have changed and it is mostly due to some of the OS auto-update and/or some application update you installed in your machine. There could be any random reason for this problem however if I would have hit the exact same problem here is what I would do to troubleshoot such issue:
To start, first thing is to just check it is not an application specific problem by creating a base app from web/worker template and see if that exhibit the problem.
If you have installed new release Windows Azure SDK 1.7 check with both SDK 1.6 and 1.7 to verify if both exhibit the problem.
Check if your could debug IIS based application as well outside Compute Emulator. This will isolate if the problem is specific to Windows Azure development Fabric or bind to your IIS itself.
If this is IIS specific issue, Check IIS configuration for all enabled functionalities, try resetting Application Pool configuration, running "ASPnet_regiis -i" etc to fix the issue.
If it is Windows Azure Computer Emulator specific, I know sometime OS updates may make application unstable so in that case, I will re-install .net 4.0 and VS2010 SP1 again respectively. (This does help so many time) then re-install Azure SDK 1.7 completely.
Such random problem mostly occur due to some change in your machine configuration, so restoring the VS2010 and the re-installing all other application does help to solve problems.
If you have an exception in the role's OnStart() or in Application_Start() that the debugger doesn't pick up, you may also receive this message. Application_Start() errors are especially pernicious because the debugger doesn't attach to the web process until after this method returns.
If you are wedded to cloud specific classes such as RoleEnvironment and cannot make the web role a startup project, you can use Ctrl-F5 to run the cloud project without debugging. With some luck you'll get a yellow screen of death to show you the true error.
Avkash covers the points.
I had the same issue recently. I set my web project as start-up rather than Azure and I discovered that that web project didn't actually run. Turned out somehow when of my projects was compiling for X64. I changed that and it worked.
I have a newly installed laptop running Win7/x64 and installed Visual Studio 2010, then VS2010 SP1, and then the Windows Azure SDK 1.4.
When I attempt to debug a cloud service project in the local compute emulator environment, I get an error: "The was an error attaching the debugger to the IIS worker process for URL 'http://127.0.0.1:5102/' for role instance..."
Some searching turned up quite a few discussions on this issue with the Azure SDK 1.3 update and I've narrowed down the issue to my having multiple sites in the same Web Role in my Azure application. If I comment out the sites entries in the ServiceDefinition.csdef, there's no error and debugging works fine. I tried the other recommended solutions, reinstalling .NET, re-registering ASP, rebooting while facing Redmond, but same problem.
I'm surprised by this issue on a new VS/Azure 1.4 installation and I'm hoping someone else has resolved supporting multiple sites for local debug.
Thanks!
I ran into the same problem, and have two suggestions:
If you've pointed to the "Published" output of a website and not the source location in ServiceDefinition.csdef, you'll get this error. Point to the source location of the web site when you're debugging. You can always switch the location later if you'd rather deploy a published web site rather than the source.
Ensure that you have debug set to false in the each of the web application's web.config file. While obvious, this catches me from time to time.
I am trying to publish an MVC 2 application to my local Win 7 IIS 7.
The app pool is Integrated 2.0, not classic.
The app is .net 3.5.
The project was originally started in VS2008, but I have upgraded to 2010.
I publish the app through the VS wizard to a file location, I have also tried publishing again in VS, but web deploy to localhost - neither makes a difference.
The app spins up fine when I just hit F5 in VS and work in debug mode.
Any ideas? I have googled about, but nothing has sorted it.
Thanks in advance.
Did you make sure the AppPool is set to allow 32bit apps?
The environment:
Clean (new) install of Windows 7 64bit.
Clean (new) install of Visual Studio 2010 Professional (10.0.30319.1).
Windows Update is up to date.
The problem:
I cannot start the debugger on Visual Studio 2010 (hit F5): 'Unable to start debugging on the web server. Unable to connect to the web server. Verify that the web server is running and that incomming HTTP requests are not blocked by a firewall.'
However, 'attach to process' (what I usually do) does work, but it is painfully slow to start (Visual Studio 'thinks' a lot of time before the debugging is actually enabled).
On the same hardware, running VS 2008 on good old Windows XP (32bits), this problem never happened.
Trying to debug a site running under the ASP.NET Development Server also fails: 'Unable to connect to ASP.NET Development Server.'.
There are plenty of web pages about these errors (many very outdated and does not apply to my environment), none of them worked for me.
Notes:
No matter if I run Visual Studio as Administrator or not. The problem is
the same.
The problem happens even when running a brand new blank IIS web site, either created as 'localhost/something' or 'sample.local'.
If I create a 'File System' web site (to try ASP.NET Development Server), when I hit F5, the server starts, but after a long wait Visual Studio says 'Unable to connect to ASP.NET Development Server.'
The 'hosts' file has an explicit 127.0.0.1 entry for 'localhost' and for 'sample.local'
It's the same problem either running .NET 2.0 or 4.0.
It's the same either configuring the application pool with or without 'Enable 32-Bit Applications' true or false.
It's the same either configuring the application pool is classic or integrated mode.
In a desperate attempt, I've added all the IIS 6.0 legacy 'features' stuff (not needed!) and doesn't helped at all.
I don't now what else I can try.
Thanks.
OMG!, I'm so stupid. The most oblivious thing was truly wrong. There was a wrong rule in the firewall. Therefore, even being in 'interactive mode' (as it is was always set), the connection was denied.