Here is the situation, I have setup 2 codeigniter installation.
One will be a client and one will be an api. Further improvement of this will be
The client will no longer be made from CI, since I wasn't using it's functionality. I just wanted to start out from a mvc framework right on.
My question would be where should I be storing sessions? during logins.
Below is how I did it, but I think I did it wrong.
I created a Login from the client. This one sends the login credentials to the api and then validated these information sent by the client and will return a message/response whethere the login credentials were valid or not.
If the login details were valid, the api will set a session in it's controller like this
if(true) {
$this->session->set_userdata($array);
}
This is in the login_controller I created. Is this the proper way of setting sessions for a client of a api?
You've got the concept right. You only want to set session userdata upon verifying the user supplied valid credentials.
That said, make sure you're using encrypted cookies and, if you're handling sensitive data, store your session data in the database. Storing it in the database causes some odd quirks with how sessions work in CodeIgniter (mainly with flashdata), but the added benefit of positive identification might potentially be worth it.
By storing the session data in the database, you can more positively verify a user is who they claim to be (in terms of the session ID, etc). The reason is because the session data is stored only in the database, and not in the session cookie (which only holds session ID and some other info). That way, even if someone does manage to decrypt the cookie, they can't modify their userdata to pretend to be someone else, like you might be able to with the cookies only method.
I am working on a web page that uses a lot of AJAX to communicate with the server. The server, in turn, has an extensive REST/JSON API exposing the different operations called by the web client.
This web site is used by both anonymous and authenticated users. As you might expect, the web service calls issued by authenticated users require authentication, and are thus protected from unauthorized users or applications.
However, the web site has a lot of features that require no authentication, and some of these make use of anonymous web services. The only way I am using to prevent outsiders from calling this web services is by using a CSRF token. I know, the CSRF token is not very useful in this regard... with some time in hand, you can figure out how to consume the web services even if they use a CSRF token.
Of course, you can use a CAPTCHA to prevent applications or bots from autonomously using your web service. However, any human will be able to use it.
Sharing a secret key between client and server, on the other side, would be useless. This, because of the ability of any outsider to read it from the web page source code.
I would like to make these web services as difficult to invoke as posible to any 3rd party application. What would you do besides using the CSRF token? It sounds a little stupid, but hey, maybe it is stupid and I am just losing my time.
Note: given this application uses a browser and not an "executable" as the client, this question is irrelevant to the discussion. I cannot use a secret between server and client (not to my knowledge, at least)
I would take a few steps.
Force https on the site. Automatically redirect any incoming http requests to https ones (the RequireHttps attribute is handy for this)
Each page needs to (securely, hence the https) send a one-time use token to the client, to be used for the page. The script running on the client can hold this in the page memory. Any request coming back sends a hashed & salted response, along with the nonce salt. The server can repeat the steps with the saved token + salt and hash to confirm the request. (much like explunit's answer above)
(It's worth noting that the secure request from a client isn't being authenticated from a user account, merely a token sent with the full page.)
The definition for one-time could either be session or page load, depending on your security vs convenience preference. Tokens should be long and expired fairly quickly to frustrate attackers.
The SSL + Hash(token + nonce) should be enough for your needs.
This is interesting. Below is a crazy suggestion. Remember, your question is also equally crazy.
Your website, once opened through a browser, should generate a long polling connection (Comet programing). This will create a unique session between the browser and the server. When ur JS is making the ajax call, send some token (unique token every time) to the server through the long polling thread. Let the AJAX also send the same token. At the server, get the AJAX token and check whether you have a similar token in you long polling session. If yes, fulfill the request. Any coder can break this. But, it won't be easy. Chances are the freeboarders won't even see these second piece of comet code. You can implement the comet code in such a way it is not easy to detect or understand. When they call ur service, send a 'Service Unavailable' message. They will be confused. Also make the comet code https.
You can also check how long that long polling thread is open. If the session was just opened and you get a ajax call right away, you can assume it is a 3rd party call. It depends on ur website flow. If ur Ajax call happens after 1 second of page load, you can check for that pattern on server side.
Anyone coding for your public api, will have 1 to 2 secret checks that they wouldn't even know and even if they know, they might be discouraged by all the extra coding they have to do.
You might have an easier problem than the one described in the linked question since you don't need to distribute a binary to the users. Even if your app is open source, the HMAC/signature key (in the "Request Signatures" part of that answer) can be controlled by an environment/configuration setting.
To summarize:
The secret key is not actually sent between client and server. Rather, it's used to sign the requests
Be sure that the requests include some unique/random element (your CSRF key probably suffices) so that two requests for the same API data are not identical.
Sign the request with the secret key and append the signature to the request. You linked to a PHP question but not clear if what language you're using. In .Net I would use a HMAC class such as HMACSHA256.
On the API server-side use the same HMAC object to verify that the request was signed with the same secret key.
Maybe you could use counters to keep track of conversations. Only the Server and Clients will be able to predict the next iteration in a conversation. This way, I think, you can prevent third party applications to impersonate someone (Just an idea though).
At the beginning, they start talking at some iteration (i=0, for example).
Every time the client requests something, the counter is incremented by some number in both the server side and the client (i=i+some_number).
And, after a few minutes of no communication, they both know they have to reset the counter (i=0).
This is just an idea based on the concept of RSA and also placing Fraud Detection on your system. The Risk from Authorized users is minimal however they can attempt to make anonymous calls to your web-service too.
For UN-Authorised users : For each web-service call , generate a token say using RSA which changes after some time(can be configured say 30 min). This way prediction of code is minimized. I have not heard of RSA collision till now. Send this token back to the user for his browser session. For further security , we might want to attach a session id with RSA token. Since session ids are unique new anonymous calls would require new session id.
Calls can be tracked using Auditing mechanism. Also per-web service there can be a different RSA setup. How the Algorithm for Fraud Detection would work is a challenge by itself.
For Authorized Users :
Every user should be tracked by his IP Address using Header block. The RSA token principle can be applied.
The solution is very vague but worth considering.
I have a standard HTML login page, which I would much rather use than the standard HTTP authentication pop-up provided by browsers. Today, I am using session cookies to keep track of the session after logging in, but I'd like to be stateless and pass the HTTP authentication every time. The web services I am hitting already support this, so this is a browser-only issue.
Adding authentication credentials is trivial in jQuery, but I don't know how to keep them around. If you go from the login page (a jsp) to the Home page (another jsp) you clearly don't keep the username and password fields from the login page. I know some browsers will store your HTTP authentication credentials if you enter them from the pop-up, but I don't know if they get stored when using an XHRRequest. If they do, is there much consistency among browsers?
Also, the user needs to be able to "sign out" of the application, too. If the browser stores the authentication credentials, is there a way to clear them using JavaScript.
I feel like I can't be the first person to try to solve this. Is there some jQuery plugin or something that already handles this? Or is it simply not possible to do what I'm trying to do?
You have 2 options:
1) Client-side storage of credentials -- not a good idea. For obvious reasons you don't want to store the username/password on the client. If you had a hashed version of the password, it might not be so bad, but still not recommended. In any case, if you're going to store on the client side, you either have to use a cookie, or HTML5 local storage (which is not widely supported, yet)
2) Server-side storage of credentials -- typically done with sessions. Then the resultant Session ID can be passed back to the client and persisted in either a cookie or in the URL of each subsequent AJAX call (?SESSID=xyz for example)
The server-side approach would be the most secure, reliable, and easiest to implement
Okay, I'll take a stab at helping ...
Firstly, understand how HTTP authentication works. There are two versions - Basic and Digest. Basic transmits in plaintext, digest is encrypted. With these types of authentication, the username/password are passed in the HTTP header with every single request. The browser captures these at login and they are stored in an inaccessible browser session cookie which is deleted when the browser session is closed. So, in answer to one of your questions, you can't access these from javascript.
You could create your own session cookie variables for username and password. The jQuery functions for this are really simple. See jquery-cookie module as one example of how to set session cookies. These could be retrieved from the session cookie and sent with each ajax request and validated in the server. However, this is not a particulary good way to do authentication since sniffing the network will allow anybody to easily grab your auth details. But, it would work.
Using session cookie based authentication where the session ID is sent sent with each request is the best way to do this. At the server side, you need to have a function called for every HTTP request. This function should do the following:
check to see if the session has been authenticated
if no:
redirect to login screen
if yes:
do authorization and allow the user access to the page
Most web frameworks support session cookie authentication and the management of session ids at the server. This is definately the way to go.
This is interesting one.
Manage user sessions on server by use of cookies. Create a session when user first accesses the login page and pass the session id/key as value to one of the cookie via response. When the user is authenticated put user "key" info in cookie and "values" in application context at server. Once user is logged, any subsequent request will be authenticated based on session cookie value at server. Authorization will be done based on user "key" passed as cookie value.
On logout clear the session based cookies from server and refresh the site to default page.
Cookies are bizarre with different browsers - just a note ;)
Hope this helps.
Update
The answer below was posted in 2012 and the links are mostly dead. However, since then, a more elegant standards-based approach to the same solution appeared using JSON Web Tokens. Here is a good blog post explaining how to use them.
Most answers miss the point, which is to avoid having any server-side session. I don't want any application state in the server. I'll award the bounty to answer that came closest, but the real credit goes to the rest-discuss group and Jon Moore for the correct answer and to Mike Amundsen for helping me to actually understand it.
The best answer I've gotten is to use a cookie, but not the typical automatic session id cookie given to you by most application servers. The cookie (which will automatically be sent with each subsequent request) is a user identifier and time signed by the server. You can include an expiration time with the cookie so it simulates the typical 30 minute session on a server (which means you have to push it forward with subsequent requests) as well as keeps the same cookie from being valid forever.
The XHR/AJAX part is a red herring. This will work whether you are doing XHR requests or an old-fashioned page-by-page web application. The main points are:
The cookie is automatically sent on subsequent requests so there's no
special scripting required - it's just how browsers work already.
The server does not need to store any session for the user, so the user
can hit any server in a cluster and not have to re-authenticate.
Slightly interesting in that you consider pushing some of the authent to the client. If you want a conventional solution, KOGI's server-side suggestion is the way to go.
But you also seem to be asking questions about memory leaks involving your user supplied secrets. Good questions. But to take a general stab at answering that I'd say it would have to be browser specific. It's browser internals, javascript engine internals -dependent where a client side application (i.e., the browser, or js in the browser) is storing the values the user inputs.
Most likely those values are not replicated needlessly throughout memory, but there's no way to guarantee that. Apart from responsible javascript coding practices, there's nothing you can do to guarantee the limit of locations of user inputs.
Slight digression
The basic point is if you store it on the client it is not really secure -- unless, the serve stores encrypted information on the client with a key that only the server (or the user via their correct credentials), has. So you could conceivably code a JS application to do some authent on the client -- much the same as how bank card (used to?) do POS authent by checking the PIN to the PIN on the card, and not back at the DB. It's based on the (somewhat flimsy) assumption the user has no direct read/write access of the "dark area" cookie/local storage on client / mag strip on bank card. So I would only advise this as disqualifier for false authents and not as a sole qualifier for the credentials.
Main point
If you do want to be stateless, just store user credentials in localstorage, or as a cookie but encrypt them with a server key. When you need them send an XHR with the encrypted / use stored credentials to the server over HTTPS, let your server decrypt them and send them to the callback. Then pass those cleartext of HTTPS to do your authent.
Is using sessions in a RESTful API really violating RESTfulness? I have seen many opinions going either direction, but I'm not convinced that sessions are RESTless. From my point of view:
authentication is not prohibited for RESTfulness (otherwise there'd be little use in RESTful services)
authentication is done by sending an authentication token in the request, usually the header
this authentication token needs to be obtained somehow and may be revoked, in which case it needs to be renewed
the authentication token needs to be validated by the server (otherwise it wouldn't be authentication)
So how do sessions violate this?
client-side, sessions are realized using cookies
cookies are simply an extra HTTP header
a session cookie can be obtained and revoked at any time
session cookies can have an infinite life time if need be
the session id (authentication token) is validated server-side
As such, to the client, a session cookie is exactly the same as any other HTTP header based authentication mechanism, except that it uses the Cookie header instead of the Authorization or some other proprietary header. If there was no session attached to the cookie value server-side, why would that make a difference? The server side implementation does not need to concern the client as long as the server behaves RESTful. As such, cookies by themselves should not make an API RESTless, and sessions are simply cookies to the client.
Are my assumptions wrong? What makes session cookies RESTless?
First of all, REST is not a religion and should not be approached as such. While there are advantages to RESTful services, you should only follow the tenets of REST as far as they make sense for your application.
That said, authentication and client side state do not violate REST principles. While REST requires that state transitions be stateless, this is referring to the server itself. At the heart, all of REST is about documents. The idea behind statelessness is that the SERVER is stateless, not the clients. Any client issuing an identical request (same headers, cookies, URI, etc) should be taken to the same place in the application. If the website stored the current location of the user and managed navigation by updating this server side navigation variable, then REST would be violated. Another client with identical request information would be taken to a different location depending on the server-side state.
Google's web services are a fantastic example of a RESTful system. They require an authentication header with the user's authentication key to be passed upon every request. This does violate REST principles slightly, because the server is tracking the state of the authentication key. The state of this key must be maintained and it has some sort of expiration date/time after which it no longer grants access. However, as I mentioned at the top of my post, sacrifices must be made to allow an application to actually work. That said, authentication tokens must be stored in a way that allows all possible clients to continue granting access during their valid times. If one server is managing the state of the authentication key to the point that another load balanced server cannot take over fulfilling requests based on that key, you have started to really violate the principles of REST. Google's services ensure that, at any time, you can take an authentication token you were using on your phone against load balance server A and hit load balance server B from your desktop and still have access to the system and be directed to the same resources if the requests were identical.
What it all boils down to is that you need to make sure your authentication tokens are validated against a backing store of some sort (database, cache, whatever) to ensure that you preserve as many of the REST properties as possible.
I hope all of that made sense. You should also check out the Constraints section of the wikipedia article on Representational State Transfer if you haven't already. It is particularly enlightening with regard to what the tenets of REST are actually arguing for and why.
First, let's define some terms:
RESTful:
One can characterise applications conforming to the REST constraints
described in this section as "RESTful".[15] If a service violates any
of the required constraints, it cannot be considered RESTful.
according to wikipedia.
stateless constraint:
We next add a constraint to the client-server interaction:
communication must be stateless in nature, as in the
client-stateless-server (CSS) style of Section 3.4.3 (Figure 5-3),
such that each request from client to server must contain all of the
information necessary to understand the request, and cannot take
advantage of any stored context on the server. Session state is
therefore kept entirely on the client.
according to the Fielding dissertation.
So server side sessions violate the stateless constraint of REST, and so RESTfulness either.
As such, to the client, a session cookie is exactly the same as any
other HTTP header based authentication mechanism, except that it uses
the Cookie header instead of the Authorization or some other
proprietary header.
By session cookies you store the client state on the server and so your request has a context. Let's try to add a load balancer and another service instance to your system. In this case you have to share the sessions between the service instances. It is hard to maintain and extend such a system, so it scales badly...
In my opinion there is nothing wrong with cookies. The cookie technology is a client side storing mechanism in where the stored data is attached automatically to cookie headers by every request. I don't know of a REST constraint which has problem with that kind of technology. So there is no problem with the technology itself, the problem is with its usage. Fielding wrote a sub-section about why he thinks HTTP cookies are bad.
From my point of view:
authentication is not prohibited for RESTfulness (otherwise there'd be little use in RESTful services)
authentication is done by sending an authentication token in the request, usually the header
this authentication token needs to be obtained somehow and may be revoked, in which case it needs to be renewed
the authentication token needs to be validated by the server (otherwise it wouldn't be authentication)
Your point of view was pretty solid. The only problem was with the concept of creating authentication token on the server. You don't need that part. What you need is storing username and password on the client and send it with every request. You don't need more to do this than HTTP basic auth and an encrypted connection:
Figure 1. - Stateless authentication by trusted clients
You probably need an in-memory auth cache on server side to make things faster, since you have to authenticate every request.
Now this works pretty well by trusted clients written by you, but what about 3rd party clients? They cannot have the username and password and all the permissions of the users. So you have to store separately what permissions a 3rd party client can have by a specific user. So the client developers can register they 3rd party clients, and get an unique API key and the users can allow 3rd party clients to access some part of their permissions. Like reading the name and email address, or listing their friends, etc... After allowing a 3rd party client the server will generate an access token. These access token can be used by the 3rd party client to access the permissions granted by the user, like so:
Figure 2. - Stateless authentication by 3rd party clients
So the 3rd party client can get the access token from a trusted client (or directly from the user). After that it can send a valid request with the API key and access token. This is the most basic 3rd party auth mechanism. You can read more about the implementation details in the documentation of every 3rd party auth system, e.g. OAuth. Of course this can be more complex and more secure, for example you can sign the details of every single request on server side and send the signature along with the request, and so on... The actual solution depends on your application's need.
Cookies are not for authentication. Why reinvent a wheel? HTTP has well-designed authentication mechanisms. If we use cookies, we fall into using HTTP as a transport protocol only, thus we need to create our own signaling system, for example, to tell users that they supplied wrong authentication (using HTTP 401 would be incorrect as we probably wouldn't supply Www-Authenticate to a client, as HTTP specs require :) ). It should also be noted that Set-Cookie is only a recommendation for client. Its contents may be or may not be saved (for example, if cookies are disabled), while Authorization header is sent automatically on every request.
Another point is that, to obtain an authorization cookie, you'll probably want to supply your credentials somewhere first? If so, then wouldn't it be RESTless? Simple example:
You try GET /a without cookie
You get an authorization request somehow
You go and authorize somehow like POST /auth
You get Set-Cookie
You try GET /a with cookie. But does GET /a behave idempotently in this case?
To sum this up, I believe that if we access some resource and we need to authenticate, then we must authenticate on that same resource, not anywhere else.
Actually, RESTfulness only applies to RESOURCES, as indicated by a Universal Resource Identifier. So to even talk about things like headers, cookies, etc. in regards to REST is not really appropriate. REST can work over any protocol, even though it happens to be routinely done over HTTP.
The main determiner is this: if you send a REST call, which is a URI, then once the call makes it successfully to the server, does that URI return the same content, assuming no transitions have been performed (PUT, POST, DELETE)? This test would exclude errors or authentication requests being returned, because in that case, the request has not yet made it to the server, meaning the servlet or application that will return the document corresponding to the given URI.
Likewise, in the case of a POST or PUT, can you send a given URI/payload, and regardless of how many times you send the message, it will always update the same data, so that subsequent GETs will return a consistent result?
REST is about the application data, not about the low-level information required to get that data transferred about.
In the following blog post, Roy Fielding gave a nice summary of the whole REST idea:
http://groups.yahoo.com/neo/groups/rest-discuss/conversations/topics/5841
"A RESTful system progresses from one steady-state to the
next, and each such steady-state is both a potential start-state
and a potential end-state. I.e., a RESTful system is an unknown
number of components obeying a simple set of rules such that they
are always either at REST or transitioning from one RESTful
state to another RESTful state. Each state can be completely
understood by the representation(s) it contains and the set of
transitions that it provides, with the transitions limited to a
uniform set of actions to be understandable. The system may be
a complex state diagram, but each user agent is only able to see
one state at a time (the current steady-state) and thus each
state is simple and can be analyzed independently. A user, OTOH,
is able to create their own transitions at any time (e.g., enter
a URL, select a bookmark, open an editor, etc.)."
Going to the issue of authentication, whether it is accomplished through cookies or headers, as long as the information isn't part of the URI and POST payload, it really has nothing to do with REST at all. So, in regards to being stateless, we are talking about the application data only.
For example, as the user enters data into a GUI screen, the client is keeping track of what fields have been entered, which have not, any required fields that are missing etc. This is all CLIENT CONTEXT, and should not be sent or tracked by the server. What does get sent to the server is the complete set of fields that need to be modified in the IDENTIFIED resource (by the URI), such that a transition occurs in that resource from one RESTful state to another.
So, the client keeps track of what the user is doing, and only sends logically complete state transitions to the server.
As I understand, there are two types of state when we are talking about sessions
Client and Server Interaction State
Resource State
Stateless constraint here refers to the second type in Rest. Using cookies (or local storage) does not violate Rest since it is related to the first.
Fielding says: 'Each request from client to server must contain all of the information necessary to understand the request, and cannot take advantage of any stored context on the server. Session state is therefore kept entirely on the client.'
The thing here is that every request to be fulfilled on the server needs the all necessary data from the client. Then this is considered as stateless. And again, we're not talking about cookies here, we're talking about resources.
HTTP transaction, basic access authentication, is not suitable for RBAC, because basic access authentication uses the encrypted username:password every time to identify, while what is needed in RBAC is the Role the user wants to use for a specific call.
RBAC does not validate permissions on username, but on roles.
You could tric around to concatenate like this: usernameRole:password, but this is bad practice, and it is also inefficient because when a user has more roles, the authentication engine would need to test all roles in concatenation, and that every call again. This would destroy one of the biggest technical advantages of RBAC, namely a very quick authorization-test.
So that problem cannot be solved using basic access authentication.
To solve this problem, session-maintaining is necessary, and that seems, according to some answers, in contradiction with REST.
That is what I like about the answer that REST should not be treated as a religion. In complex business cases, in healthcare, for example, RBAC is absolutely common and necessary. And it would be a pity if they would not be allowed to use REST because all REST-tools designers would treat REST as a religion.
For me there are not many ways to maintain a session over HTTP. One can use cookies, with a sessionId, or a header with a sessionId.
If someone has another idea I will be glad to hear it.
i think token must include all the needed information encoded inside it, which makes authentication by validating the token and decoding the info
https://www.oauth.com/oauth2-servers/access-tokens/self-encoded-access-tokens/
No, using sessions does not necessarily violate RESTfulness. If you adhere to the REST precepts and constraints, then using sessions - to maintain state - will simply be superfluous. After all, RESTfulness requires that the server not maintain state.
Sessions are not RESTless
Do you mean that REST service for http-use only or I got smth wrong? Cookie-based session must be used only for own(!) http-based services! (It could be a problem to work with cookie, e.g. from Mobile/Console/Desktop/etc.)
if you provide RESTful service for 3d party developers, never use cookie-based session, use tokens instead to avoid the problems with security.