I,m using Builder::XmlMarkup to create xml. I want to create a tag without content because the api force me to create this.
If I use a blog
xml.tag do
end
I get what i need
<tag></tag>
but I want it shorter
xml.mytag
this gives me
<mytag/>
but i want
<mytag></mytag>
what do I have to pass as option.
regards Kai
Just pass empty string as a parameter. xml.mytag('')
Why do you want <mytag></mytag> instead of <mytag/>? Since the output is XML, downstream applications should not know or care about the difference.
According to the Infoset spec (Appendix D point 7), "The difference between the two forms of an empty element: <foo/> and <foo></foo>" is not represented in the XML Information Set.
This doesn't answer your "how" question, but if you discover that you actually don't need to do what you're trying to do, it may save you from a difficult and unnecessary wild goose chase.
ok empty string is nice, another one-line-way is empty block I found out.
xml.mytag{}
Related
I had searched around but couldn't find something for it specifically. I was looking for a way to find the content of a URL (In this case these are URIs in a rest API)
A few examples of these look like:
/currency/{currency-id}
Or
/contact-group/{ID}/member/{CONTACT-ID}
The parameters always can be different, however they always are between {}, in different forms within the string. I know how I can replace these when there is only one in the URI without issue, but at runtime the programmer won't know these, and I'm trying to prevent having to define them and because of this when URIs contain multiple parameters I'm not sure how to obtain each case of them.
Happy for any ideas on how to get around this!
Seems like you're looking for a basic example of routing:
# in config/routes.rb
get "/:param_1/:param_2", to: "MyController#some_action"
Then in the controller you'd be able to get params[:param_1] and such.
You can see Rails' routing guide for more info
Maybe I'm not totally understanding your question, though. If you're looking to be able to capture a variable number of params, there's a special syntax for passing arrays in the query param.
See this: Passing array of parameters through get in rails
The answer to this was here
Basically using parameterset = url.scan(/{.+?}/) (replace url with your string name), and what's in scan with your parameter list, I can use this to do
parameterset.each { |x| x.... etc}
I am getting data from a broken RSS feed that gives me wrong link. I wanted to fix this link so I made this code:
<link.*>(.*)&.*tid(.*)</link>
and the link could be like:
www.somedomain.com/?value=50&burrrdurrrr;tid=120
But the real working link is in this form:
www.somedomain.com/?value=50&tid=120
The thing that I'm asking is if my measure thing looks like this:
[FeedURL]
Measure=Plugin
Plugin=Plugins\WebParser.dll
Url=[Feed]
StringIndex=2 ;now I only get www.somedomain.com/?value=50
Substitute=#SubstituteFeed#
How am I supposed to concatenate the strings together to complete the url?
I'm guessing rather than &burrrdurrrr;, the link has &, which is how you have to write & in an HTML or XML file.
If that's the case, you just need to set the DecodeCharacterReference option, as described in this handy-looking tutorial. Another option mentioned there is Substitute, which would be able to strip it out even if it really was &burrrdurrrr;.
None of this is a particularly sensible way of dealing with HTML or XML - a much better approach would be a plugin which actually parsed the document structure and let you reference nodes using XPath or CSS rules - but you work with what you've got, I guess. (I've never heard of this "Rainmeter" before, despite its claim to be "the best known and most popular desktop customization program for Windows"; maybe because nobody else calls their program that, instead almost universally using the word "widget"?)
I would want to get a structured version of a Wikiquote page via JSON (basically I need all phrases)
Example: http://en.wikiquote.org/wiki/Fight_Club_(film)
I tried with: http://en.wikiquote.org/w/api.php?format=xml&action=parse&page=Fight_Club_(film)&prop=text
but I get all HTML source code. I need each pharse as an element of an Array
How could I achieve that with DBPEDIA?
For one thing Iam not sure whether you can query wiki quotes using DBpedia and secondly, DBpedia gives you only info box data in a structured way, it does not in a any way the article content in a structured way. Instead with a little bit of trouble you can use the Media wiki api to get the data
EDIT
The URI you are trying gives you a text so this will make things easier, but not completely.
Try this piece of code in your console:
require 'Nokogiri'
content = JSON.parse(open("http://en.wikiquote.org/w/api.php?format=json&action=parse&page=Fight_Club_%28film%29&prop=text").read)
data = content['parse']['text']['*']
xpath_data = Nokogiri::HTML data
xpath_data.xpath("//ul/li").map{|data_node| data_node.text}
This is the closest I have come to an answer, of course this is not completely right because you will get a lot on unnecessary data. But if you dig into Nokogiri and xpath and find out how to pin point the nodes you need you can get a solution which will give you correct quotes at least 90% of the time.
Just change the format to JSON. Look up the Wikipedia API for more details.
http://en.wikiquote.org/w/api.php?format=json&action=parse&page=Fight_Club_(film)&prop=text
I Have two objects in same page but with different locations(tabs), I want to verify those objects each a part ...
i cant uniquely any of objects because the have same properties.
These objects clearly are unique to a point because they have completely different text, this means that you will be able to create an object to match only one of them. My suggestion would be to look for the object by using its text property, one of them will always have "Top Ranking" the other you wil need to turn into a regular expression for the text and will be something "Participants (\d+)".
I am assuming that this next answer is unlikely to be possible so saved it for after the answer you are likely to use but the best solution would of course be to get someone with access to give these elements ids for you to search for. This will in the long term be much easier for you to maintain and not using text will allow this test to run in any language.
Manaysah, do these objects have different indexes? Use the object spy and determine which index they have, the ordinal identifier index may be a solution to your problem. You could also try adding an innertext object property if possible, using a wildcard for the number inside the () as it appears dynamic.
try using xpath for the objects...xpath will definitely be different
Am wondering if the combination of trim(), strip_tags() and addslashes() is enough to filter values of variables from $_GET and $_POST
That depends what kind of validation you are wanting to perform.
Here are some basic examples:
If the data is going to be used in MySQL queries make sure to use mysql_real_escape_query() on the data instead of addslashes().
If it contains file paths be sure to remove the "../" parts and block access to sensitive filename.
If you are going to display the data on a web page, make sure to use htmlspecialchars() on it.
But the most important validation is only accepting the values you are expecting, in other words: only allow numeric values when you are expecting numbers, etc.
Short answer: no.
Long answer: it depends.
Basically you can't say that a certain amount of filtering is or isn't sufficient without considering what you want to do with it. For example, the above will allow through "javascript:dostuff();", which might be OK or it might not if you happen to use one of those GET or POST values in the href attribute of a link.
Likewise you might have a rich text area where users can edit so stripping tags out of that doesn't exactly make sense.
I guess what I'm trying to say is that there is simple set of steps to sanitizing your data such that you can cross it off and say "done". You always have to consider what that data is doing.
It highly depends where you are going to use it for.
If you are going to display things as HTML, make absolutely sure you are properly specifying the encoding (e.g.: UTF-8). As long as you strip all tags, you should be fine.
For use in SQL queries, addslashes is not enough! If you use the mysqli library for example, you want to look at mysql::real_escape_string. For other DB libraries, use the designated escape function!
If you are going to use the string in javascript, addslashes will not be enough.
If you are paranoid about browser bugs, check out the OWASP Reform library
If you use the data in another context than HTML, other escaping techniques apply.