Little snitch is an application i installed and does not show up in startup items in system preferences, however the application always starts up whenever the system starts, how does it do this, is there some other place where applications can register themselves so they launch on startup.
EDIT: BELONGS ON SUPERUSER.
Little Snitch runs at a much lower level than normal applications; it is a Kernel extension (kext) which integrates with the Mac OS kernel.
This is why you don't see it appear as a 'normal' registered program in your startup items list, because it's not one of those.
Somebody has put a list of files installed by Little Snitch here (link is a couple of years old)
A 'Daemon' or a 'Launch Agent' can do that.
Have a look in /Library/LaunchAgent or /Library/LaunchDaemon
There will be quite a few processes that launch without being in the Startup Items section of System Preferences.
Related
I need to know how to create an application which will always be running in the background and collects location info once every 10 minutes. I don't know much about launch agents and daemons.
I have read a few examples where I found Launch agents is just a plist file. Should we launch the app through launch agents every 10 minutes? How to do that?
There's no simple answer to this; you really need to read—or at least familiarize yourself with—the Daemons and Services Programming Guide, particularly the "Creating Login Items" section.
If you plan on creating a sandboxed (App Store) application, that limits your options somewhat, but not dramatically (for this kind of application).
You need to decide if your background process needs a UI or not. I suspect not, so I'd direct you to the either the XPC Service or user agent route. These will be registered with launchd and launchd has about a billion different options for how and when your process gets launched, and one of those is periodically. For more info on those, see man launchd.plist, particularly StartInterval and StartCalendarInterval.
With this knowledge, I'd then suggest to do some internet and open source searches looking for examples. I'm sure you'll find plenty.
I accidentally removed my Startup Folder in AppsData so the StartUp Tab in my Task Manager is empty. However, some applications still start up automatically. What do I do in order to stop these applications from starting up? I'm afraid that my BIOS will take a long time to start up once I download more programs in my PC.
There are several places in Windows which specify start-up programs. You can see the full list using the msconfig.exe utility.
More details here: https://www.howtogeek.com/74523/how-to-disable-startup-programs-in-windows/
Also, note that some programs register themselves as "services" and started by the Windows Service Manager, so you might take a look on "Control Panel"->"Administrative tools"->"Services". But be careful, most of the stuff there is essential for normal system operation.
I need some "light" to get a solution. Probably there are tons of things that cause this problem, but maybe somebody could help me.
Scenario: a Windows server running 24/7 a PostgreSQL database and others server applications (for processing tasks on database, etc...). There are differents servers scenarios (~30), with different hardware and windows versions (XP SP3/ WinServer, etc... all NT based). All aplications were written in Delphi7, and link to DLLs (in D7 also).
After some days (sometimes a week, sometimes a couple of months), Windows begins to act strange, like not opening start menu, some buttons are missing in dialogs. And soon some applications do not open, raising a event on eventviewer:
Faulting application x, version y, faulting module kernel32.dll, version 5.1.2600.5781, fault address 0x00012afb
In mean while, others applications open fine, like notepad, iexplore, etc... but SOME of my applications don't, with only event log described above. But if we do not restart system, in a few days even cmd.exe stops open, (and all other applications) with same error on eventlog.
I've tried to find 'what' can cause this, but with no sucess. So, and any advice will be welcome.
Thanks in advance.
I think you are running out of resource handles (Window handles). You can verify this by having a look at the system properties in Sysinternals Process Explorer (a better task manager). I think even the default task manager can help out to display a handle count. Then you can identify which application is causing the trouble.
Once you know the application leaking and if it is yours, you can use Rational purify or Boundschecker to drill down to the problem. If you do not have money for these tools you will have to reduce the problem manually a bit by deactivating some features for example and see if the handle count still increases...
Not sure if it is the problem you are experiencing maybe it is completely unrelated. But easy to check. The track is that some app is stealing some global resources as you experience trouble with other applications. Applications like notepad do not use much resources so appear to work fine, heavy apps are more likely to show up the trouble.
Hope it helps.
I have a console application (written in VB6 ) which is behaving strangely on my machine. I kick it off from the command line and what should be a two minute job drops straight back to the prompt - if I run this on another machine the executable will sit and wait until the job finishes before returning control back to the prompt. If I check process explorer I can see that the executable is running as a background process and other than this strange background-ness is running as expected.
Any thoughts on why this could be happening? (Running on 32-bit Windows XP Pro SP3.)
It's totally unclear whether this is an application you wrote and have the source code for. If that's the case, you need to get in and start debugging. At the least, use OutputDebugString to send information about what's going on to any number of potential viewers. Taking that a step further, consider rewiring the app using the Console module I wrote, along with vbAdvance to recompile. This combination will allow you the full power of the VB6 IDE to debug within. No more guessing about what's going on.
Then again, if it's not your app, I'm not sure what VB6 has to do with it and wish you the best of luck trying to figure out what's up.
It sounds to me as though the app isn't being recognised as a console app on one of your machines. Console apps weren't officially supported in VB6, although there are some well-known hacks for creating them (particularly the free add-in vbAdvance). Possibly your console app is a bit unreliable? If Windows thinks your app is a GUI rather than a console app, it won't wait for it to finish.
As a pragmatic workaround: try launching with start /wait rather than just using the exename. That forces the command prompt to wait for the program to finish, whether it's a GUI app or a console app.
Sounds like an error is occurring that is being 'swallowed' by the application. Do you have the source code?
Errors in VB6 apps are often due to some COM component not installed and/or registered.
Download SysInternals Process Monitor and this will show up accesses to ProgIDs that fail (uninstalled/unregistered COM components).
Check out: Process Monitor - Hands-On Labs and Examples.
Have you checked permissions? Is the application accessing any network based resources?
The product we are working on allows the user to easily set it up to run automatically whenever the computer is started. This is helpful because the product is part of the basic work environment of most of our users.
This feature was implemented not so long ago and for a while all was well, but when we started testing this feature on Vista the product started behaving really weird on startup. Specifically, our product makes use of another product (lets call it X) that it launches whenever it needs its services. The actual problem is that whenever X is launched immediately after log-on, it crashes or reports critical errors related to disk access (this happens even when X is launched directly - not through our product).
This happens whenever we run our product by registering it in the "Run" key in the registry or place a shortcut to it in the "Startup" folder inside the "Start Menu", even when we put a delay of ~20 seconds before actually starting to run. When we changed the delay to 70 seconds, all is well.
We tried to reproduce the problem by launching our product manually immediately after logon (by double-clicking on a shortcut placed on the desktop) but to no avail.
Now how is it possible that applications that run normally a minute after logon report such hard errors when starting immediately after logon?
This is the effect of a new feature in Vista called "Boxing":
Windows has several mechanisms that allow the user/admin to set up applications to automatically run when windows starts. This feature is mostly used for one of these purposes:
1. Programs that are part of the basic work environment of the user, such that the first action the user would usually take when starting the computer is to start them.
2. All sorts of background "agents" - skype, messenger, winamp etc.
When too many (or too heavy) programs are registered to run on startup the end result is that the user can't actually do anything for the first few seconds/minutes after login, which can be really annoying. In comes Vista's "Boxing" feature:
Briefly, Vista forces all programs invoked through the Run key to operate at low priority for the first 60 seconds after login. This affects both I/O priority (which is set to Very Low) and CPU priority. Very Low priority I/O requests do not pass through the file cache, but go directly to disk. Thus, they are much slower than regular I/O.
The length of the boxing period is set by the registry value:
"HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DelayedApps\Delay_Sec".
For a more detailed explanation see here and here
The program probably needs some more info put into its properties. It needs to "Run As", instead of just running.
Maybe this application should be developed as a service, instead of a program to be launched, or you could have service that launches the program when its determined the best window of opportunity.