How to use vim in the terminal? - macos

How does one setup and start using vim in the terminal on OS X?
I want to start writing my C code using vim in the terminal rather than a separate text editor. How does one get started on this?
The basics like: opening, creating, saving files via terminal using vim and writing code using vim. Also, does one compile directly using vim in the terminal?


Get started quickly
You simply type vim into the terminal to open it and start a new file.
You can pass a filename as an option and it will open that file, e.g. vim main.c. You can open multiple files by passing multiple file arguments.
Vim has different modes, unlike most editors you have probably used. You begin in NORMAL mode, which is where you will spend most of your time once you become familiar with vim.
To return to NORMAL mode after changing to a different mode, press Esc. It's a good idea to map your Caps Lock key to Esc, as it's closer and nobody really uses the Caps Lock key.
The first mode to try is INSERT mode, which is entered with a for append after cursor, or i for insert before cursor.
To enter VISUAL mode, where you can select text, use v. There are many other variants of this mode, which you will discover as you learn more about vim.
To save your file, ensure you're in NORMAL mode and then enter the command :w. When you press :, you will see your command appear in the bottom status bar. To save and exit, use :x. To quit without saving, use :q. If you had made a change you wanted to discard, use :q!.
Configure vim to your liking
You can edit your ~/.vimrc file to configure vim to your liking. It's best to look at a few first (here's mine) and then decide which options suits your style.
This is how mine looks:
To get the file explorer on the left, use NERDTree. For the status bar, use vim-airline. Finally, the color scheme is solarized.
Further learning
You can use man vim for some help inside the terminal. Alternatively, run vimtutor which is a good hands-on starting point.
It's a good idea to print out a Vim Cheatsheet and keep it in front of you while you're learning vim.


Run vim from the terminal. For the basics, you're advised to run the command vimtutor.
# On your terminal command line:
$ vim
If you have a specific file to edit, pass it as an argument.
$ vim yourfile.cpp
Likewise, launch the tutorial
$ vimtutor


You can definetely build your code from Vim, that's what the :make command does.
However, you need to go through the basics first : type vimtutor in your terminal and follow the instructions to the end.
After you have completed it a few times, open an existing (non-important) text file and try out all the things you learned from vimtutor: entering/leaving insert mode, undoing changes, quitting/saving, yanking/putting, moving and so on.
For a while you won't be productive at all with Vim and will probably be tempted to go back to your previous IDE/editor. Do that, but keep up with Vim a little bit every day. You'll probably be stopped by very weird and unexpected things but it will happen less and less.
In a few months you'll find yourself hitting o, v and i all the time in every textfield everywhere.
Have fun!


if you want to open all your .cpp files with one command, and have the window split in as many tiles as opened files, you can use:
vim -o $(find name ".cpp")
if you want to include a template in the place you are, you can use:
:r ~/myHeaderTemplate
will import the file "myHeaderTemplate in the place the cursor was before starting the command.
you can conversely select visually some code and save it to a file
select visually,
add w ~/myPartialfile.txt
when you select visualy, after type ":" in order to enter a command, you'll see "'<,'>" appear after the ":"
'<,'>w ~/myfile $
^ if you add "~/myfile" to the command, the selected part of the file will be saved to myfile.
if you're editing a file an want to copy it :
:saveas newFileWithNewName


If you want to learn by reading yourself:
Open MacOS terminal app.
Write this and press enter -> vimtutor
For quit write this and click -> :q

Related

How to disable automatically delete going in Register in vim

I recently setup VIM 8.1 with the option to cut content and put it in Mac clipboard. Now when I do visual mode selection and yank(y) it goes straight to the clipboard. And this feature is great for me, but I got issue now if I have something in my clipboard and I use x, d commands to edit vim, it also goes to the clipboard, which makes more difficult to work.
Suppose I have copied something from the web and now I want to put in vim, but there is already 1-2 characters so I use x to delete them, now all content which I brought in the clipboard is replaced with these characters. Which make my work very complicated.
How can I disable this feature, so x, d command should not write on the Clipboard or Vim default register.

In Vim, y, d, p, etc. belong together. To be able use Vim effectively, they should all use the same default register/clipboard. Instead, use "+y or "*y to explicitly copy to a system clipboard.
If you want a handy shortcut, you can define a new keybinding for that, e.g. nnoremap \y "+y.

Switching between files without closing vim editor [duplicate]

I've started using Vim to develop Perl scripts and am starting to find it very powerful.
One thing I like is to be able to open multiple files at once with:
vi main.pl maintenance.pl
and then hop between them with:
:n
:prev
and see which file are open with:
:args
And to add a file, I can say:
:n test.pl
which I expect would then be added to my list of files, but instead it wipes out my current file list and when I type :args I only have test.pl open.
So how can I add and remove files in my args list?

Why not use tabs (introduced in Vim 7)?
You can switch between tabs with :tabn and :tabp,
With :tabe <filepath> you can add a new tab; and with a regular :q or :wq you close a tab.
If you map :tabn and :tabp to your F7/F8 keys you can easily switch between files.
If there are not that many files or you don't have Vim 7 you can also split your screen in multiple files: :sp <filepath>. Then you can switch between splitscreens with Ctrl+W and then an arrow key in the direction you want to move (or instead of arrow keys, w for next and W for previous splitscreen)

Listing
To see a list of current buffers, I use:
:ls
Opening
To open a new file, I use
:e ../myFile.pl
with enhanced tab completion (put set wildmenu in your .vimrc).
Note: you can also use :find which will search a set of paths for you, but you need to customize those paths first.
Switching
To switch between all open files, I use
:b myfile
with enhanced tab completion (still set wildmenu).
Note: :b# chooses the last visited file, so you can use it to switch quickly between two files.
Using windows
Ctrl-W s and Ctrl-W v to split the current window horizontally and vertically. You can also use :split and :vertical split (:sp and :vs)
Ctrl-W w to switch between open windows, and Ctrl-W h (or j or k or l) to navigate through open windows.
Ctrl-W c to close the current window, and Ctrl-W o to close all windows except the current one.
Starting vim with a -o or -O flag opens each file in its own split.
With all these I don't need tabs in Vim, and my fingers find my buffers, not my eyes.
Note: if you want all files to go to the same instance of Vim, start Vim with the --remote-silent option.

:ls
for list of open buffers
:bp previous buffer
:bn next buffer
:bn (n a number) move to n'th buffer
:b <filename-part> with tab-key providing auto-completion (awesome !!)
In some versions of vim, bn and bp are actually bnext and bprevious respectively. Tab auto-complete is helpful in this case.
Or when you are in normal mode, use ^ to switch to the last file you were working on.
Plus, you can save sessions of vim
:mksession! ~/today.ses
The above command saves the current open file buffers and settings to ~/today.ses. You can load that session by using
vim -S ~/today.ses
No hassle remembering where you left off yesterday. ;)

To add to the args list:
:argadd
To delete from the args list:
:argdelete
In your example, you could use :argedit test.pl to add test.pl to the args list and edit the file in one step.
:help args gives much more detail and advanced usage

I use buffer commands - :bn (next buffer), :bp (previous buffer) :buffers (list open buffers) :b<n> (open buffer n) :bd (delete buffer). :e <filename> will just open into a new buffer.

I think you may be using the wrong command for looking at the list of files that you have open.
Try doing an :ls to see the list of files that you have open and you'll see:
1 %a "./checkin.pl" line 1
2 # "./grabakamailogs.pl" line 1
3 "./grabwmlogs.pl" line 0
etc.
You can then bounce through the files by referring to them by the numbers listed, e.g.
:3b
or you can split your screen by entering the number but using sb instead of just b.
As an aside % refers to the file currently visible and # refers to the alternate file.
You can easily toggle between these two files by pressing Ctrl Shift 6
Edit: like :ls you can use :reg to see the current contents of your registers including the 0-9 registers that contain what you've deleted. This is especially useful if you want to reuse some text that you've previously deleted.

Vim (but not the original Vi!) has tabs which I find (in many contexts) superior to buffers. You can say :tabe [filename] to open a file in a new tab. Cycling between tabs is done by clicking on the tab or by the key combinations [n]gt and gT. Graphical Vim even has graphical tabs.

Things like :e and :badd will only accept ONE argument, therefore the following will fail
:e foo.txt bar.txt
:e /foo/bar/*.txt
:badd /foo/bar/*
If you want to add multiple files from within vim, use arga[dd]
:arga foo.txt bar.txt
:arga /foo/bar/*.txt
:argadd /foo/bar/*

Many answers here! What I use without reinventing the wheel - the most famous plugins (that are not going to die any time soon and are used by many people) to be ultra fast and geeky.
ctrlpvim/ctrlp.vim - to find file by name fuzzy search by its location or just its name
jlanzarotta/bufexplorer - to browse opened buffers (when you do not remember how many files you opened and modified recently and you do not remember where they are, probably because you searched for them with Ag)
rking/ag.vim to search the files with respect to gitignore
scrooloose/nerdtree to see the directory structure, lookaround, add/delete/modify files
EDIT: Recently I have been using dyng/ctrlsf.vim to search with contextual view (like Sublime search) and I switched the engine from ag to ripgrep. The performance is outstanding.
EDIT2: Along with CtrlSF you can use mg979/vim-visual-multi, make changes to multiple files at once and then at the end save them in one go.

Some answers in this thread suggest using tabs and others suggest using buffer to accomplish the same thing. Tabs and Buffers are different. I strongly suggest you read this article "Vim Tab madness - Buffers vs Tabs".
Here's a nice summary I pulled from the article:
Summary:
A buffer is the in-memory text of a file.
A window is a viewport on a buffer.
A tab page is a collection of windows.

To change all buffers to tab view.
:tab sball
will open all the buffers to tab view. Then we can use any tab related commands
gt or :tabn " go to next tab
gT or :tabp or :tabN " go to previous tab
details at :help tab-page-commands.
We can instruct vim to open ,as tab view, multiple files by vim -p file1 file2.
alias vim='vim -p' will be useful.
The same thing can also be achieved by having following autocommand in ~/.vimrc
au VimEnter * if !&diff | tab all | tabfirst | endif
Anyway to answer the question:
To add to arg list: arga file,
To delete from arg list: argd pattern
More at :help arglist

When using multiple files in vim, I use these commands mostly (with ~350 files open):
:b <partial filename><tab> (jump to a buffer)
:bw (buffer wipe, remove a buffer)
:e <file path> (edit, open a new buffer>
pltags - enable jumping to subroutine/method definitions

You may want to use Vim global marks.
This way you can quickly bounce between files, and even to the marked location in the file. Also, the key commands are short:
'C takes me to the code I'm working with,
'T takes me to the unit test I'm working with.
When you change places, resetting the marks is quick too:
mC marks the new code spot,
mT marks the new test spot.

If using only vim built-in commands, the best one that I ever saw to switch among multiple buffers is this:
nnoremap <Leader>f :set nomore<Bar>:ls<Bar>:set more<CR>:b<Space>
It perfectly combines both :ls and :b commands -- listing all opened buffers and waiting for you to input the command to switch buffer.
Given above mapping in vimrc, once you type <Leader>f,
All opened buffers are displayed
You can:
Type 23 to go to buffer 23,
Type # to go to the alternative/MRU buffer,
Type partial name of file, then type <Tab>, or <C-i> to autocomplete,
Or just <CR> or <Esc> to stay on current buffer
A snapshot of output for the above key mapping is:
:set nomore|:ls|:set more
1 h "script.py" line 1
2 #h + "file1.txt" line 6 -- '#' for alternative buffer
3 %a "README.md" line 17 -- '%' for current buffer
4 "file3.txt" line 0 -- line 0 for hasn't switched to
5 + "/etc/passwd" line 42 -- '+' for modified
:b '<Cursor> here'
In the above snapshot:
Second column: %a for current, h for hidden, # for previous, empty for hasn't been switched to.
Third column: + for modified.
Also, I strongly suggest set hidden. See :help 'hidden'.

I use the same .vimrc file for gVim and the command line Vim. I tend to use tabs in gVim and buffers in the command line Vim, so I have my .vimrc set up to make working with both of them easier:
" Movement between tabs OR buffers
nnoremap L :call MyNext()<CR>
nnoremap H :call MyPrev()<CR>
" MyNext() and MyPrev(): Movement between tabs OR buffers
function! MyNext()
if exists( '*tabpagenr' ) && tabpagenr('$') != 1
" Tab support && tabs open
normal gt
else
" No tab support, or no tabs open
execute ":bnext"
endif
endfunction
function! MyPrev()
if exists( '*tabpagenr' ) && tabpagenr('$') != '1'
" Tab support && tabs open
normal gT
else
" No tab support, or no tabs open
execute ":bprev"
endif
endfunction
This clobbers the existing mappings for H and L, but it makes switching between files extremely fast and easy. Just hit H for next and L for previous; whether you're using tabs or buffers, you'll get the intended results.

If you are going to use multiple buffers, I think the most important thing is to
set hidden
so that it will let you switch buffers even if you have unsaved changes in the one you are leaving.

I use the following, this gives you lots of features that you'd expect to have in other editors such as Sublime Text / Textmate
Use buffers not 'tab pages'. Buffers are the same concept as tabs in almost all other editors.
If you want the same look of having tabs you can use the vim-airline plugin with the following setting in your .vimrc: let g:airline#extensions#tabline#enabled = 1. This automatically displays all the buffers as tab headers when you have no tab pages opened
Use Tim Pope's vim-unimpaired which gives [b and ]b for moving to previous/next buffers respectively (plus a whole host of other goodies)
Have set wildmenu in your .vimrc then when you type :b <file part> + Tab for a buffer you will get a list of possible buffers that you can use left/right arrows to scroll through
Use Tim Pope's vim-obsession plugin to store sessions that play nicely with airline (I had lots of pain with sessions and plugins)
Use Tim Pope's vim-vinegar plugin. This works with the native :Explore but makes it much easier to work with. You just type - to open the explorer, which is the same key as to go up a directory in the explorer. Makes navigating faster (however with fzf I rarely use this)
fzf (which can be installed as a vim plugin) is also a really powerful fuzzy finder that you can use for searching for files (and buffers too). fzf also plays very nicely with fd (a faster version of find)
Use Ripgrep with vim-ripgrep to search through your code base and then you can use :cdo on the results to do search and replace

My way to effectively work with multiple files is to use tmux.
It allows you to split windows vertically and horizontally, as in:
I have it working this way on both my mac and linux machines and I find it better than the native window pane switching mechanism that's provided (on Macs). I find the switching easier and only with tmux have I been able to get the 'new page at the same current directory' working on my mac (despite the fact that there seems to be options to open new panes in the same directory) which is a surprisingly critical piece. An instant new pane at the current location is amazingly useful. A method that does new panes with the same key combos for both OS's is critical for me and a bonus for all for future personal compatibility.
Aside from multiple tmux panes, I've also tried using multiple tabs, e.g. and multiple new windows, e.g. and ultimately I've found that multiple tmux panes to be the most useful for me. I am very 'visual' and like to keep my various contexts right in front of me, connected together as panes.
tmux also support horizontal and vertical panes which the older screen didn't (though mac's iterm2 seems to support it, but again, the current directory setting didn't work for me). tmux 1.8

In my and other many vim users, the best option is to,
Open the file using,
:e file_name.extension
And then just Ctrl + 6 to change to the last buffer. Or, you can always press
:ls to list the buffer and then change the buffer using b followed by the buffer number.
We make a vertical or horizontal split using
:vsp for vertical split
:sp for horizantal split
And then <C-W><C-H/K/L/j> to change the working split.
You can ofcourse edit any file in any number of splits.

I use the command line and git a lot, so I have this alias in my bashrc:
alias gvim="gvim --servername \$(git rev-parse --show-toplevel || echo 'default') --remote-tab"
This will open each new file in a new tab on an existing window and will create one window for each git repository.
So if you open two files from repo A, and 3 files from repo B, you will end up with two windows, one for repo A with two tabs and one for repo B with three tabs.
If the file you are opening is not contained in a git repo it will go to a default window.
To jump between tabs I use these mappings:
nmap <C-p> :tabprevious<CR>
nmap <C-n> :tabnext<CR>
To open multiple files at once you should combine this with one of the other solutions.

I use multiple buffers that are set hidden in my ~/.vimrc file.
The mini-buffer explorer script is nice too to get a nice compact listing of your buffers. Then :b1 or :b2... to go to the appropriate buffer or use the mini-buffer explorer and tab through the buffers.

have a try following maps for convenience editing multiple files
" split windows
nmap <leader>sh :leftabove vnew<CR>
nmap <leader>sl :rightbelow vnew<CR>
nmap <leader>sk :leftabove new<CR>
nmap <leader>sj :rightbelow new<CR>
" moving around
nmap <C-j> <C-w>j
nmap <C-k> <C-w>k
nmap <C-l> <C-w>l
nmap <C-h> <C-w>h

I made a very simple video showing the workflow that I use. Basically I use the Ctrl-P Vim plugin, and I mapped the buffer navigation to the Enter key.
In this way I can press Enter in normal mode, look at the list of open files (that shows up in a small new window at the bottom of the screen), select the file I want to edit and press Enter again. To quickly search through multiple open files, just type part of the file name, select the file and press Enter.
I don't have many files open in the video, but it becomes incredibly helpful when you start having a lot of them.
Since the plugin sorts the buffers using a MRU ordering, you can just press Enter twice and jump to the most recent file you were editing.
After the plugin is installed, the only configuration you need is:
nmap <CR> :CtrlPBuffer<CR>
Of course you can map it to a different key, but I find the mapping to enter to be very handy.

I would suggest using the plugin
NERDtree
Here is the github link with instructions.
Nerdtree
I use vim-plug as a plugin manager, but you can use Vundle as well.
vim-plug
Vundle

When I started using VIM I didn't realize that tabs were supposed to be used as different window layouts, and buffer serves the role for multiple file editing / switching between each other. Actually in the beginning tabs are not even there before v7.0 and I just opened one VIM inside a terminal tab (I was using gnome-terminal at the moment), and switch between tabs using alt+numbers, since I thought using commands like :buffers, :bn and :bp were too much for me. When VIM 7.0 was released I find it's easier to manager a lot of files and switched to it, but recently I just realized that buffers should always be the way to go, unless one thing: you need to configure it to make it works right.
So I tried vim-airline and enabled the visual on-top tab-like buffer bar, but graphic was having problem with my iTerm2, so I tried a couple of others and it seems that MBE works the best for me. I also set shift+h/l as shortcuts, since the original ones (moving to the head/tail of the current page) is not very useful to me.
map <S-h> :bprev<Return>
map <S-l> :bnext<Return>
It seems to be even easier than gt and gT, and :e is easier than :tabnew too. I find :bd is not as convenient as :q though (MBE is having some problem with it) but I can live with all files in buffer I think.

Most of the answers in this thread are using plain vim commands which is of course fine but I thought I would provide an extensive answer using a combination of plugins and functions that I find particularly useful (at least some of these tips came from Gary Bernhardt's file navigation tips):
To toggle between the last two file just press <leader> twice. I recommend assigning <leader> to the spacebar:
nnoremap <leader><leader> <c-^>
For quickly moving around a project the answer is a fuzzy matching solution such as CtrlP. I bind it to <leader>a for quick access.
In the case I want to see a visual representation of the currently open buffers I use the BufExplorer plugin. Simple but effective.
If I want to browse around the file system I would use the command line or an external utility (Quicklsilver, Afred etc.) but to look at the current project structure NERD Tree is a classic. Do not use this though in the place of 2 as your main file finding method. It will really slow you down. I use the binding <leader>ff.
These should be enough for finding and opening files. From there of course use horizontal and vertical splits. Concerning splits I find these functions particularly useful:
Open new splits in smaller areas when there is not enough room and expand them on navigation. Refer here for comments on what these do exactly:
set winwidth=84
set winheight=5
set winminheight=5
set winheight=999
nnoremap <C-w>v :111vs<CR>
nnoremap <C-w>s :rightbelow split<CR>
set splitright
Move from split to split easily:
nnoremap <C-J> <C-W><C-J>
nnoremap <C-K> <C-W><C-K>
nnoremap <C-L> <C-W><C-L>
nnoremap <C-H> <C-W><C-H>

if you're on osx and want to be able to click on your tabs, use MouseTerm and SIMBL (taken from here). Also, check out this related discussion.

You can be an absolute madman and alias vim to vim -p by adding in your .bashrc:
alias vim="vim -p"
This will result in opening multiple files from the shell in tabs, without having to invoke :tab ball from within vim afterwards.

To open 2 or more files with vim type: vim -p file1 file2
After that command to go threw that files you can use CTRL+Shift+↑ or ↓ , it will change your files in vim.
If u want to add one more file vim and work on it use: :tabnew file3
Also u can use which will not create a new tab and will open file on screen slicing your screen: :new file3
If u want to use a plugin that will help u work with directories
and files i suggest u NERDTree.
To download it u need to have vim-plug so to download other plugins also NERDTree to type this commands in your ~/.vimrc.
let data_dir = has('nvim') ? stdpath('data') . '/site' : '~/.vim'
if empty(glob(data_dir . '/autoload/plug.vim'))
silent execute '!curl -fLo '.data_dir.'/autoload/plug.vim --create-dirs
https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim'
autocmd VimEnter * PlugInstall --sync | source $MYVIMRC
endif
call plug#begin('~/.vim/plugged')
Plug 'scrooloose/nerdtree'
call plug#end()
Then save .vimrc via command :wq , get back to it and type: :PlugInstall
After that the plugins will be installed and u could use your NERDTree with other plugins.

In Visual Studio, find and commands by name?

I'd like to use the keyboard more in Visual Studio, and my memory for ctrl+alt+f??, alt+?? key combinations is failing me.
I'd prefer an adjunct like the emacs model, where it's possible to search commands by name; For instance, in emacs you type
alt+x enab <tab><tab>
and it presents you with a list of commands starting 'enab';
enable-command
enable-flow-control
enable-theme
I'd like to know if there is a shortcut or extension so that I could do something similar in VS, like
alt+x imm <tab><tab>
and then choose to execute one of
Debug.Immediate
Tools.ImmediateMode
Any clues?
EDIT
Both #Trillian and #the_mandrill have given me the right answers. It turns out there are two ways to enter the kind of mode I'm looking for;
1) The Edit.GoToFindCombo, which gives you a small bit of menu-bar space to type things like
>Debug.Immediate
2) The View.CommandWindow, which gives you a full panel (like the immediate window or the output window) which allows you to type in a bit more space and see the text output of executed commands.
It's also possible to alias commands in either window yourself, using the command window and a syntax like
alias sol View.SolutionExplorer
And to retrieve the current list like
alias
I've mapped Edit.GoToFindCombo to alt-x and View.CommandWindow to alt-shift-x and it's feelimg more emacs-y already :)

It would be nice if this was integrated in the Ctrl+Q Quick Launch box. Until then, the best built-in tool for this is probably the Go To Find Combo. You can use this to launch arbitrary commands by typing the '>' character and then the beginning of a Visual Studio command, including those you listed. You get autocompletion, but only for strings that start with what you're typing, so >Deb would list you all commands starting with Debug.. For your specific example, >imm would actually work because there is an immed shortcut to Debug.Immediate, but in general you'll have to know the prefix.
The Go To Find Combo is not in the VS2013 UI by default, but you can add it to any toolbar by selecting "Customize" and finding the command in the "Edit" category. Once it's sitting in a toolbar, the Ctrl+/ shortcut will give it the focus by default.
The '>' prefix for command completion also works from the Command and Immediate windows.

Try using the Command Window (Ctrl-Alt-A). This brings up an emacs-like command buffer. Type:
Deb.Imm<tab>
to expand to Debug.Immediate. Typing the '.' forces autocompletion if there's one unique command (Debug is the only match for 'De'). Tab key will cycle through options. More info at the Command Window article on MSDN. There's also a list of Aliases that you can also add your own to, eg
alias di Debug.Immediate
I've also just discovered that you can type Ctrl-\ to set the focus to the Find pane and enter a command directly in there.

Vim Question Regarding Views

I have been reading a lot of the questions here on vim. I can't locate something that I want to do with vim but I am sure its possible.
I like vim(I am still new at it) using tabs and I have adjusted my vimrc so that H & L keys take me back and forth between tabs.
I was hoping to find a way to be able to use tab commands to open up a tab as output, so that if I am writing something in my case Ruby and I want to test it I could run it and flip to a new tab with the output. Or flip a tab to an interactive console to test code. This is possible?
As an aside is it possible to expand tabs to views so if I had two tabs open say script and output I could :spx or similar and have tabs come to split screen.

You can load the ruby output into a vim window in a couple of ways. One way would be to open a new split window and then load output of command:
" vimscript command to open new split window
wincmd n
" run ruby command and insert output at line 1
1,1!ruby foo.rb
alternatively you could get view the output on a new tab with a single window:
tabnew
1,1!ruby foo.rb

I know it's not the answer you want, but use buffers and ditch the tabs. I have a screencast going over how to use splits to manage your window.
http://lococast.net/archives/111
As for the ruby output, that seems like it might be covered here:
https://superuser.com/questions/133886/vim-displaying-code-output-in-a-new-window-a-la-textmate

In answer to your question about opening up a tab as output, I don't think there's any built in way to do this. There's the RunView plugin (see my answers to this question and this one), but I don't think that it supports using a separate tab (it works with a split window: what I think you refer to when you say 'view').
Regarding an interactive console: no, this is not possible. See :help design-not.
As for general use of Vim, try to get used to the idea of buffers and the fact that each 'view' (my term), whether it be a split window, a tab or whatever is just a means of looking at a particular buffer. You can have multiple views on a single buffer, so you can have a source file vertical split with two headers in one tab and the same source file vertically split with another header and a different bit of the same source file in another tab. This is very powerful once you get used to it. The Ctrl-W keyboard shortcuts are your friend (e.g. Ctrl-W, h to go left one window).
As for changing a tab into a split window, I don't think there's a direct way to do this (how would Vim know which tabs you wanted to join?). You can break a split into a tab with Ctrl-W + T, but to go back you'd have to create a couple of mappings. This is off the top of my head but something like this might work:
command! TakeThis let takebufnr = bufnr("")<CR>
command! SplitTaken exe 'split #' . takebufnr<CR>
nmap ,t :TakeThis<CR>
nmap ,s :SplitTaken<CR>
Then press ,t on the buffer you want to grab and ,s on the one you want to split with the 'taken' buffer.

Why does < C-a> (CTRL+A) not work under gvim on windows?

I'm trying to use the < C-a> (CTRL+A) shorcut under vim to increment a variable under the cursor. This works fine under vim running on Linux. However when I try to do this in gvim under windows it "selects all" (i.e. highlights or visually selects all text in the current window). How can I change this behaviour or alternatively how can I recover the increment variable functionality (e.g. perhaps with a different key mapping)?

This is because of mswin.vim that is sourced by the default _vimrc generated when you install vim.
Just override your _vimrc with the .vimrc you are using under *nix, or delete mswin.vim.

I know I'm late to the party, but I thought I'd share the following:
nnoremap <kPlus> <C-a>
nnoremap <kMinus> <C-x>
This remaps increment to the + key on the numeric keypad and decrement to the - key. It's the solution I've used in my own _vimrc file on Windows. It keeps the Windows compatibility and is easier to remember than the original Ctrl+A/Ctrl+X as well.

Vim on Windows has specialized key mappings by default to make shortcuts more "windows-y". These are specified in the $VIMRUNTIME\mswin.vim file, which is loaded via your vimrc unless you disabled it. You can edit the mswin.vim file (you may want to edit a copy instead, changing your vimrc to use your edited copy instead).
I'm not entirely sure it's a default Vim mapping, since the only reference I can find on Ctrl+A in the help file is this, which doesn't seem to do what you are referring to:
*c_CTRL-A*
CTRL-A All names that match the pattern in front of the cursor are
inserted.
so you may want to check your Linux box to see if any plugins or anything change the key mapping. (Of course, it may be that I just can't find the appropriate part of the Vim help.)

in the current version of mswin.vim provided with gvim, the file checks for the value of a global named skip_loading_mswin; If set, the rest of the file is skipped; thus it is sufficient to add
let skip_loading_mswin=1
to $HOME/_vimrc and normal vim bindings will be restored the next time you start vim.

If you just do not like CtrlA behaviour but are fine with other windows behaviours in VIM (like CtrlZ for undo), just disable that specific line:
Edit said file (c:\Program Files\Vim\vim73\mswin.vim for me)
Find the paragraph starting with CTRL-A is Select all
Prepend all (6) lines of that paragraph with opening brackets (")
Reopen your GVIM windows.
You can still "select all" by typing ggVG (position cursor at first line, select entire line, select until the last line of the document).
Happy incrementing!

Resources