I'm trying to debug a custom javascript for Thunderbird that is defined in userChrome.js. Unfortunately I did not find a decent way to log to the javascript console. Is there an easy way to dump some information to an easily accessible console/logfile so that I can debug my script? I have console² installed and tried calling
throw Error("foobar");
already, without success.
Does Application.console.log("message") work?
Write console.log("hello"); in your *.uc.js file.
Open browser console(ctrl + shift + j).
Now, you can see message from file *.uc.js.
Related
I'm using VS2013/CodedUI and my palybacksetting is as follow:
Playback.PlaybackSettings.LoggerOverrideState = HtmlLoggerState.AllActionSnapshot;
I also have a 3rd party tool that I have integrated to my code that does some action that codedui can't...Iw an to be able to log those steps into the ActionLog.html file with where codedui capture the actions and screenshot.
I searched a lot but didn't find anything on how we can achieve this.
thanks in advance for any help
I posted a response over here: Writing Custom HTML Logs
It sounds like there's not a good way to do this. You can get the path to where the html file lives and write a custom logger from there. I'm not sure it'd be safe to try and write to it while your test is executing, but perhaps once your test is complete.
I am basically executing the following luna-send command and trying to get those parameters from applicationManager:
luna-send -n 1 palm://com.palm.power/timeout/set '{"wakeup":true, "key":"myKey",
"uri":"palm://com.palm.applicationManager/launch","params":{"id":"com.my.app",
"params":{"test":true,"test1:true}},"in":"00:00:15"}'
After executing this command, my app gets launched by applicationManager, but I don't know how to get those params in my app. I am using enyo 2.0. I was trying to use onWindowsParamsChange handler, but ApplicationEvents is deprecated for 2.0. Can anyone help me with this?
Thanks
Under Enyo 1.0 it was enyo.windowParams. Under Enyo 2.0 I believe this functionality is gone. These parameters may be available through Cordova, but I'm not positive right now as I don't have the source handy. In any case, this was loaded from PalmSystem.launchParams so you should be able to access that.
If you're handling relaunch then you'll have a little more work to do. I think you'll need to define a Mojo.relaunch on the window object to detect when the launch parameters change.
I'm putting together a desktop application in TideSDK and am having some trouble finding the parameters passed to the application via a custom launch URL.
The application launches when the appropriate protocol is invoked (call it aaa://), but I haven't been able to figure out how to grab the URL string. I read a couple of threads that suggested I could get the string with the Ti.API.application.getArguments() call, but it returns something odd (see below).
// launch application with aaa://some_args_here
var args = Ti.API.application.getArguments();
// returns (StaticBoundList) [ /path/to/app, "-psn_0_721072", ]
I'm not completely surprised that this doesn't seem to work, as the API documentation says the getArguments method returns a list of command line arguments.
Any insight as to how to access the launch URL would be appreciated!
have a look at window.location.search
https://developer.mozilla.org/en-US/docs/DOM/window.location
It doesn't appear that there's currently an "official" way to do this, so I came up with my own solution that seems to work pretty well (though currently its only implemented for OSX).
Searching through the TideSDK source, I found the place where the native application delegate is created. I added a URL launch handler in the app delegate, which stores the launch URL in a new app delegate member, and connected it to the API with a binding in Ti.UI.
If anybody else is interested in this functionality, or have insights as to how to accomplish this task for Windows, please get in touch!
Although I don't have your problem, just want to say the following function works fine for me.
var args = Ti.API.application.getArguments();
is it possible this is the problem of the urlprotocl registry?
my url protocol is set by this : MSDN
thus the value in "Command" is
"C:\YOUR_APP_FOLDER\YOURAPP.exe" "%1"
tested on win7 and winxp,
both successfully get the arguments.
Short description
I'm getting used to CakePHP right now and am wondering about how to get more debug-information about what is happening inside the framework.
Let me please explain my situation a little more detailed
As you know CakePHP does a lot for you without putting you into the need to write additional code. One example is the handling of models.
I just created a model User and added validation-rules (no other methods). As described in the API methods like save will just work.
After that I created the needed controller and view to add a new user. When I try to add a user from the view I just receive the flash-message The user could not be created. Please, try again. No validation-violations are flashed.
I also did set the debug-level to 2: Configure::write('debug', 2); but do not receive any errors. The error.log inside \tmp\logs is also empty.
I really do want to learn how to solve those issues in the future.
So what else can I do to debug / display inner processes of cake?
Thank you very much for your help!
DebugKit is an official plugin that gives you lots of information on the request, queries and variables produced by Cake:
https://github.com/cakephp/debug_kit
You can also use trace() and other methods in the Debugger to show what is being executed in the background:
http://book.cakephp.org/2.0/en/development/debugging.html
Use a PHP IDE with an integrated debugger. That will allow you to follow execution line by line as it is executed and even inspect variable values as you go. Netbeans is a free one.
The problem: toggle javascript support without restarting firefox (nor resorting to different driver) during cucumber test run.
If Firefox's prefutils were exposed to javascript in a web page, that would make it possible. But it is not the case.
So, is there a plugin that does it? Or is there another way to solve the problem? Or is there a good tutorial (that highlights the exposing bit) on how to make such a plugin?
Edit
On a second thought, how would javascript be of any help once it is disabled? Probably the whole idea is a bit screwed.
I assume that your tests run with normal web content privileges. In that case, they aren't going to be able to affect browser settings such as whether JavaScript is enabled (I assume that's what you mean by "toggle JavaScript support").
I'd implement a simple XPCOM component with a method to turn JS support on and off (by setting the appropriate pref). You can expose it as a JavaScript global property so that your tests can access it. See Expose an XPCOM component to javascript in a web page for more details. Package your component in an extension and make sure it is installed in the Firefox instance where your tests are running.
If you want to access the preferences API directly from your content script, you can add the following prefs to Firefox, either in about:config or by adding the following lines to prefs.js in your profile directory:
user_pref("capability.principal.codebase.p1.granted", "UniversalXPConnect UniversalBrowserRead UniversalBrowserWrite UniversalPreferencesRead UniversalPreferencesWrite UniversalFileRead");
user_pref("capability.principal.codebase.p1.id", "http://www.example.com");
user_pref("capability.principal.codebase.p1.subjectName", "");`
user_pref("signed.applets.codebase_principal_support", true);
Replace www.example.com with the domain that you want to grant the privileges to. Also add this line to your JS code before you call the preferences API:
netscape.security.PrivilegeManager.enablePrivilege('UniversalXPConnect');
A local file (something loaded from file:///) is allowed to request additional privileges. Normally you would get a prompt asking whether you want to allow access - you can "auto-accept" the prompt by adding the following lines to prefs.js in the Firefox profile:
user_pref("capability.principal.codebase.p0.granted", "UniversalXPConnect");
user_pref("capability.principal.codebase.p0.id", "file://");
user_pref("capability.principal.codebase.p0.subjectName", "");
You page can then do:
netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");
var branch = Components.classes["#mozilla.org/preferences-service;1"]
.getService(Components.interfaces.nsIPrefBranch);
branch.setBoolPref("javascript.enabled", false);
This will definitely work if your page is a local file. Judging by the error message however, you are currently running code from about:blank. It might be that changing capability.principal.codebase.p0.id into about:blank or into moz-safe-about:blank will allow that page to get extended privileges as well but I am not sure.
However, none of this will really help if JavaScript is already disabled and you need to enable it. This can only be solved by writing an extension and adding it to the test profile. JavaScript in Firefox extensions works regardless of this setting.
That means you need Javascript to toggle enabling or disabling Javascript.
function setJavascriptPref(bool) {
prefs = Components.classes["#mozilla.org/preferences-service;1"]
.getService(Components.interfaces.nsIPrefBranch);
prefs.setBoolPref("javascript.enabled", bool);
}