I have a bash script that executes a program in a loop, but I want to set a max time limit for each execution of the program, i.e. i just want to cancel the current execution if the time limit is exceeded but I don't want to break the entire loop.
Thanks!
There is a command named timeout on my Ubuntu. You could try this:
timeout 1s yes
This will make the process yes to ends after 1 second.
Note: with this command its also possible to specify the signal as an argument.
You can also validate that the duration constaint get respected using this command:
time timeout 3s yes
This should work in any Posix shell, including bash...
#!/bin/sh
while :; do
echo starting command
while :; do
trap break SIGTERM
sleep 5; kill $$ # 5 second timeout
sleep 10 # replace this sleep with your real command
done
echo Command terminated, restarting...
done
Related
I have a bash script which calls another bash script within a for loop (under a timeout condition) in the following format:
#!/bin/bash
trap 'trap - SIGTERM && kill 0' SIGINT SIGTERM EXIT
INNER_SCRIPT_PATH="./inner_script.sh"
for file in "$SAMPLEDIR"/*
do
if [[ "${file: -4}" == ".csv" ]]; then
CSVPATH="$file"
CSVNAME=${CSVPATH##*/} # extract file name
CSVNAME=${CSVNAME%.*} # remove extension
timeout -k 10s 30m bash "$INNER_SCRIPT_PATH"
fi
done
wait
Pressing Ctrl-C does not quit out of all the processes, and I have a feeling there is probably something wrong with the way I'm calling the inner bash script here (especially with timeout). Would appreciate feedback on how to make this better!
The issue is with the timeout command, that makes your script immune to Ctrl+C invocation. Since by default timeout runs in its own process group and not in the foreground process group, it is immune to the signals invoked from an interactive terminal.
You can run it with --foreground to accept signals from an interactive shell. See timeout Man page
I have been trying to run an executable using a bash multiple times. There is a chance that this executable will fall into infinite loop, or segfaults. I know there is no try-catch in bash but we can bypass that using:
{ #try
"myCommand" && "do what i want"
} || { #except
"handle error"
}
But this is not capable of understanding infinite loop. How can I handle this problem?
You can user timeout from the gnu coreutils.
Here a example for a timeout of 10 seconds
timeout 10s yourscript.sh
Bash can't tell you what's going on inside myCommand unless that loop sends a signal or modifies the system/environment. You could run your #try in the background &, then do something if it's still running after a certain amount of time. $! refers to the last backgrounded task.
Check out Job Control in Bash.
myCommand && doWhatIWant &
sleep 10
ps $! &>/dev/null && kill $!
Is there a way I can write a simple script to run a program, close that program about 5 seconds later, and then repeat?
I just want to be able to run a program that I wrote over and over again but to do so Id have to close it like 5 seconds after running it.
Thanks!
If your command is non-interactive (requires no user interaction):
Launch your program in the background with control operator &, which gives you access to its PID (process ID) via $!, by which you can kill the running program instance after sleeping for 5 seconds:
#!/bin/bash
# Start an infinite loop.
# Use ^C to abort.
while :; do
# Launch the program in the background.
/path/to/your/program &
# Wait 5 seconds, then kill the program (if still alive).
sleep 5 && { kill $! && wait $!; } 2>/dev/null
done
If your command is interactive:
More work is needed if your command must run in the foreground to allow user interaction: then it is the command to kill the program after 5 seconds that must run in the background:
#!/bin/bash
# Turn on job control, so we can bring a background job back to the
# foreground with `fg`.
set -m
# Start an infinite loop.
# CAVEAT: The only way to exit this loop is to kill the current shell.
# Setting up an INT (^C) trap doesn't help.
while :; do
# Launch program in background *initially*, so we can reliably
# determine its PID.
# Note: The command line being set to the bakground is invariably printed
# to stderr. I don't know how to suppress it (the usual tricks
# involving subshells and group commands do not work).
/path/to/your/program &
pid=$! # Save the PID of the background job.
# Launch the kill-after-5-seconds command in the background.
# Note: A status message is invariably printed to stderr when the
# command is killed. I don't know how to suppress it (the usual tricks
# involving subshells and group commands do not work).
{ (sleep 5 && kill $pid &) } 2>/dev/null
# Bring the program back to the foreground, where you can interact with it.
# Execution blocks until the program terminates - whether by itself or
# by the background kill command.
fg
done
Check out the watch command. It will let you run a program repeatedly monitoring the output. Might have to get a little fancy if you need to kill that program manually after 5 seconds.
https://linux.die.net/man/1/watch
A simple example:
watch -n 5 foo.sh
To literally answer your question:
Run 10 times with sleep 5:
#!/bin/bash
COUNTER=0
while [ $COUNTER -lt 10 ]; do
# your script
sleep 5
let COUNTER=COUNTER+1
done
Run continuously:
#!/bin/bash
while [ 1 ]; do
# your script
sleep 5
done
If there is no input on the code, you can simply do
#!/bin/bash
while [ 1 ]
do
./exec_name
if [ $? == 0 ]
then
sleep 5
fi
done
I have a bash script with a loop that calls a hard calculation routine every iteration. I use the results from every calculation as input to the next. I need make bash stop the script reading until every calculation is finished.
for i in $(cat calculation-list.txt)
do
./calculation
(other commands)
done
I know the sleep program, and i used to use it, but now the time of the calculations varies greatly.
Thanks for any help you can give.
P.s>
The "./calculation" is another program, and a subprocess is opened. Then the script passes instantly to next step, but I get an error in the calculation because the last is not finished yet.
If your calculation daemon will work with a precreated empty logfile, then the inotify-tools package might serve:
touch $logfile
inotifywait -qqe close $logfile & ipid=$!
./calculation
wait $ipid
(edit: stripped a stray semicolon)
if it closes the file just once.
If it's doing an open/write/close loop, perhaps you can mod the daemon process to wrap some other filesystem event around the execution? `
#!/bin/sh
# Uglier, but handles logfile being closed multiple times before exit:
# Have the ./calculation start this shell script, perhaps by substituting
# this for the program it's starting
trap 'echo >closed-on-calculation-exit' 0 1 2 3 15
./real-calculation-daemon-program
Well, guys, I've solved my problem with a different approach. When the calculation is finished a logfile is created. I wrote then a simple until loop with a sleep command. Although this is very ugly, it works for me and it's enough.
for i in $(cat calculation-list.txt)
do
(calculations routine)
until [[ -f $logfile ]]; do
sleep 60
done
(other commands)
done
Easy. Get the process ID (PID) via some awk magic and then use wait too wait for that PID to end. Here are the details on wait from the advanced Bash scripting guide:
Suspend script execution until all jobs running in background have
terminated, or until the job number or process ID specified as an
option terminates. Returns the exit status of waited-for command.
You may use the wait command to prevent a script from exiting before a
background job finishes executing (this would create a dreaded orphan
process).
And using it within your code should work like this:
for i in $(cat calculation-list.txt)
do
./calculation >/dev/null 2>&1 & CALCULATION_PID=(`jobs -l | awk '{print $2}'`);
wait ${CALCULATION_PID}
(other commands)
done
I have a simple shell script whose also is below:
#!/usr/bin/sh
echo "starting the process which is a c++ process which does some database action for around 30 minutes"
#this below process should be run in the background
<binary name> <arg1> <arg2>
exit
Now what I want is to monitor and display the status information of the process.
I don't want to go deep into its functionality. Since I know that the process will complete in 30 minutes, I want to show to the user that 3.3% is completed for every 1 min and also check whether the process is running in the background and finally if the process is completed I want to display that it is completed.
could anybody please help me?
The best thing you could do is to put some kind of instrumentation in your application,
and let it report the actual progress in terms of work items processed / total amount of work.
Failing that, you can indeed refer to the time that the thing has been running.
Here's a sample of what I've used in the past. Works in ksh93 and bash.
#! /bin/ksh
set -u
prog_under_test="sleep"
args_for_prog=30
max=30 interval=1 n=0
main() {
($prog_under_test $args_for_prog) & pid=$! t0=$SECONDS
while is_running $pid; do
sleep $interval
(( delta_t = SECONDS-t0 ))
(( percent=100*delta_t/max ))
report_progress $percent
done
echo
}
is_running() { (kill -0 ${1:?is_running: missing process ID}) 2>& -; }
function report_progress { typeset percent=$1
printf "\r%5.1f %% complete (est.) " $(( percent ))
}
main
If your process involves a pipe than http://www.ivarch.com/programs/quickref/pv.shtml would be an excellent solution or an alternative is http://clpbar.sourceforge.net/ . But these are essentially like "cat" with a progress bar and need something to pipe through them. There is a small program that you could compile and then execute as a background process then kill when things finish up, http://www.dreamincode.net/code/snippet3062.htm that would probablly work if you just want to dispaly something for 30 minutes and then print out almost done in the console if your process runs long and it exits, but you would have to modify it. Might be better just to create another shell script that displays a character every few seconds in a loop and checks if the pid of the previous process is still running, I believe you can get the parent pid by looking at the $$ variable then check if it is still running in /proc/pid .
You really should let the command output statistics, but for simplicity's sake you can do something like this to simply increment a counter while your process runs:
#!/bin/sh
cmd & # execute a command
pid=$! # Record the pid of the command
i=0
while sleep 60; do
: $(( i += 1 ))
e=$( echo $i 3.3 \* p | dc ) # compute percent completed
printf "$e percent complete\r" # report completion
done & # reporter is running in the background
pid2=$! # record reporter's pid
# Wait for the original command to finish
if wait $pid; then
echo cmd completed successfully
else
echo cmd failed
fi
kill $pid2 # Kill the status reporter