I installed Windows Server 2008 on my VMWare machine. In Windows Server 2008, I installed FTP and ran it. I also turn off all firewalls. However, from my main machine, I could not send a text file and got this errors:
200 PORT command successful.
550 file.txt: Access is denied.
Please help
If you got this error message when trying to upload a file to the server, it is possible that you did not enable write permissions for the folder that you are uploading to.
Related
I have created a simple CMake project from the template provided in visual studio 2019. It connects to remote Linux server and errors out while copying a file using "rsync" with the following error.
Could not start the 'rsync' command on the remote host, please install it using your system package manager. Please see https://aka.ms/AA23jat for troubleshooting.
The log shows the error details as following.
23:03:25.2045083 [Error, Thread 88] liblinux.IO.Rsync: liblinux.IO.RsyncException: Could not create daemon configuration file on remote device ---> liblinux.IO.RsyncException: echo config error: and error output: Unmatched ".
Please note: rsync is installed on the remote Linux server and tested it with and without ssh its working.
When I tried to test rsync which is provided by Visual Studio under "C:\Apps\VS2019Pro\Common7\IDE\VC\Linux\bin\rsync\rsync.exe" to sync/copy a file to remote linux server it fails with following error.
dup() in/out/err failed
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(226) [sender=3.1.3]
Any help on this will be appreciated.
Rsync speaks the rsync protocol, which is a client server protocol.
The client you are using needs to talk to a server, which is the rsync binary on the remote server, which doesn't seem to be here.
The message is pretty clear:
Could not start the 'rsync' command on the remote host, please install it using your system package manager. Please see https://aka.ms/AA23jat for troubleshooting.
You really need to have rsync on your remote server.
I installed rsync from source on the target using the default settings which installed it at /usr/local/bin/rsync. Apparently the path Visual Studio expects is /usr/bin. I created a symbolic link with the command 'ln -s which rsync /usr/bin/rsync'
I have installed many FTP Servers on a Windows machine and set ngrok for FTP tunneling.
C:\path\to\ngrok> ngrok tcp 21
Using linux, i am able to establish an FTP connection and browse the directories ONLY with the installed ftp client.
$ ftp
ftp> open 0.tcp.ngrok.io port_here
The problem is that FileZilla, Classic FTP File Transfer Software, Chrome & Firefox extensions, failed.
FileZilla output:
Command: LIST
Response: 150 Opening ASCII mode data connection
Error: Connection timed out after 20 seconds of inactivity
Error: Failed to retrieve directory listing
I wonder why i can't browse using FileZilla, but with the ftp Linux command works well.
Thank you.
Problem solved in FileZilla via :
Edit > Settings > Connection > FTP > Passive mode, and select "Fall back to active mode" and Bingo !
The same technique can be applied to the other FTP clients.
Im trying to configure my PHPstorm with FTP so after a file is saved, it needs to be uploaded to the host. I can connect (i did the test) but i can't upload a file unless i change the file permission to 777 of my file. Any idea how this is possible? Here is the error:
[31/01/16 17:11] Failed to transfer file '/Applications/XAMPP/xamppfiles/htdocs/yventure.nl/app/Http/Controllers/Website/HomeController.php': cant open output connection for file "ftp://mm.server/app/Http/Controllers/Website/HomeController.php". Reason: "550 app/Http/Controllers/Website/HomeController.php: Permission denied".
[31/01/16 17:11] Automatic upload completed in less than a minute: 1 item failed
EDIT: i've enabled passive mode already
I had same issue. I solved it
with "Passive Mode" in "Advanced Options" in Deployment >> FTP settings.
you must try and valided :
the user right
the group right
SSH key/pair connexion
directory right
SFTP connection (not FTP)
i want to make a server using xampp. i have already installed xampp and setting port 8080. php and mysql work fine but i can't access ftp from internet. Can you please suggest way how can I do this?
XAMPP comes preloaded with the FileZilla FTP server. Here is how to setup the service, and create an account.
Enable the FileZilla FTP Service through the XAMPP Control Panel to make it startup automatically (check the checkbox next to filezilla to install the service). Then manually start the service.
Create an ftp account through the FileZilla Server Interface (its the essentially the filezilla control panel). There is a link to it Start Menu in XAMPP folder. Then go to Users->Add User->Stuff->Done.
Try connecting to the server (localhost, port 21).
XAMPP for linux and mac comes with ProFTPD. Make sure to start the service from XAMPP control panel -> manage servers.
Further complete instructions can be found at localhost XAMPP dashboard -> How-to guides -> Configure FTP Access. I have pasted them below :
Open a new Linux terminal and ensure you are logged in as root.
Create a new group named ftp. This group will contain those user accounts allowed to upload files via FTP.
groupadd ftp
Add your account (in this example, susan) to the new group. Add other users if needed.
usermod -a -G ftp susan
Change the ownership and permissions of the htdocs/ subdirectory of the XAMPP installation directory (typically, /opt/lampp) so that it is writable by the the new ftp group.
cd /opt/lampp
chown root.ftp htdocs
chmod 775 htdocs
Ensure that proFTPD is running in the XAMPP control panel.
You can now transfer files to the XAMPP server using the steps below:
Start an FTP client like winSCP or FileZilla and enter connection details as below.
If you’re connecting to the server from the same system, use
"127.0.0.1" as the host address. If you’re connecting from a different
system, use the network hostname or IP address of the XAMPP server.
Use "21" as the port.
Enter your Linux username and password as your FTP credentials.
Your FTP client should now connect to the server and enter the /opt/lampp/htdocs/ directory, which is the default Web server document root.
Transfer the file from your home directory to the server using normal FTP transfer conventions. If you’re using a graphical FTP client, you can usually drag and drop the file from one directory to the other. If you’re using a command-line FTP client, you can use the FTP PUT command.
Once the file is successfully transferred, you should be able to see it in action.
I launched ubuntu Xampp server on AWS amazon.
And met the same problem with FTP, even though add user to group ftp SFTP and set permissions, owner group of htdocs folder.
Finally find the reason in inbound rules in security group, added All TCP, 0 - 65535 rule(0.0.0.0/0,::/0) , then working right!
On XAMPP click "Start" and after "Admin".
Login to localhost (127.0.0.1) without password, with second port, not with 21.
Add users and passwords, change your settings. Quit.
I was trying to download a file form FTP server(Remote machine) using pentaho kettle (Get a file with FTP), I can able to do that in my local machine. But when i try to deploy the app in jboss web server it fails to download resulting in a error "Error getting files from FTP : Login incorrect."
But everything seems to be correct regarding the login details.
Did i have configure any where else in the server? Please help.
There are several things you could check in this case:
Check that the security settings of the remote FTP server allows for the machine that runs the job to establish an FTP connection. If you have access to the server, try the following command to ensure that the server has access:
telnet <your-remote-ftp-server-host> 21
# Or try:
telnet <your-remote-ftp-server-host> 22
Verify that the remote FTP server respects FTP connection requests, otherwise try SFTP (Get a file with FTP & Get a file with SFTP are two entirely different job steps in Kettle)
Wherever you are fetching your FTP credentials from (ideally a configuration file), test that the credentials are properly read by the job in the relevant scope - use the Write To Log step for that matter