This question already has an answer here:
How to restore .bash_profile on a mac? None of my unix terminal are working [closed]
(1 answer)
Closed 8 months ago.
Whenever I start a new Terminal session, the window opens up with a command:
'-bash: cd: /Users/yourusername/Library/lejos_nxj: No such file or directory'.
I want to remove that line from coming up on the prompt, so I deleted the Terminal plist file and sent hard resets, but nothing has worked for me so far.
Is there anything I haven't tried yet?
You've probably got something in your ~/.profile, which is automatically executed when you open a Terminal.
If you did not set anything in there, do
rm ~/.profile
in a Terminal and this should disappear.
If you think that something important may be in there, do
open -a TextEdit ~/.profile
(or change TextEdit to your preferred editor) to view and edit the file.
That line is probably in either your ~/.bashrc file or your ~/.profile file. I would check those two files first (and they are both hidden because of the period initial character).
Edit: I just checked my OS X system, and I don't have ~/.bashrc (but you may).
You could try a terminal replacement (Just recently read about this one, iTerm2) it might
resolve your problem by using its own default startup settings.
If it is anything like Linux the ~/.bashrc and ~/.profile are used when you open your terminal.
It seems that most people assume it is in some init file but its not clear which are included. Once your shell does come up (ignore errors) -try this:
script
bash -l -x
exit
exit
Now you should have a file called typescript which will have debug info showing most if not all of what the shell has executed when coming up in login mode. You could for instance do grep source typescript to see which files were involved OR you could find refrences to nxj etc.
p.s. I assume your clearing of the plist would clear the preferences, but wouldn't hurt to see if the relevant command is in 'Terminal-> Presences->Settings->Shell->Run Command' for any of the terminal window presets
Related
this is probably a very basic question. I am using the bash shell still (Catalina). And I downloaded gromacs. Every time I open a new terminal window I first have to put
source /usr/local/gromacs/bin/GMXRC
in first, otherwise I will just get command not found.
How can I permanently source this so that I don't have to reenter it all the time?
I tried editing the /etc/paths file but that didn't work.
If you are still using the bash shell on macOS, all you have to do is:
Put the line:
source /usr/local/gromacs/bin/GMXRC
at the end in .bash_profile.
.bash_profile is in home directory, so you can open it like:
open ~/.bash_profile
Why .bash_profile?
.bash_profile is executed whenever a login interactive shell starts and on mac, every interactive shell is a login shell by default.
If in case you switch to zsh, instead of .bash_profile, I think .zlogin should be used.
But that would depend entirely on your need. Read about zsh configuration files in case you ever need that.
This question already has an answer here:
How to restore .bash_profile on a mac? None of my unix terminal are working [closed]
(1 answer)
Closed 2 years ago.
I receive this error message each time I launch terminal:
-bash: =/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin: No such file or directory
You have recently edited one of your shell's startup files and introduced an error.
Probably, ls -lart ~/.bashrc ~/.bash_profile ~/.profile will indicate which one -- if one or more is missing, that's no concern, we just want to see which one out of these you have edited recently. Examine the time stamps and try to remember what you did to change one of these files.
The error probably looks something like
$oopsPATH=/usr/local/bin:$PATH
where you meant to say
PATH=/usr/local/bin:$PATH
but without access to your files, we can't know what exactly is supposed to be there, or how you messed it up.
See also https://askubuntu.com/questions/198730/how-to-restore-bashrc-file/198740#198740
In the common case where you have messed up your PATH so that ls and other commands are unavailable (bash: ls: command not found), you can use the full path (/bin/ls pro ls, etc; though obviously, you have to know the correct path) at least until you can restore your configuration.
PATH=/usr/local/bin:/usr/bin:/bin
is probably a good crutch until you can find the correct default for your OS. You can type that at the prompt, or put it in one of your shell's startup files and start a new shell.
On many platforms, you can find the default user dot files in /etc/skel so if that's present (which unfortunately will not be true for Mac OS, but should be there on most Linuxes):
cp -b /etc/skel/.bash_profile $HOME/
will replace your (presumably broken beyond repair) .bash_profile with the system default one. (Omit the -b option if your OS doesn't have it, but then you'll want to back up your file manually before replacing it.)
Update: This fragment near the top of your .bash_profile is erroneous:
#loginPath
=/usr/local/bin:$PATH
Just take it out; it doesn't seem to do anything useful. There seem to be multiple additional fragments from the MacPorts installer which look wrong, too, but they are just comments. (Perhaps somehow they shouldn't be?)
It seems that you are missing a necessary PATH and that is why it is saying no such file or directory. If, for example, you get this error message when typing in python, it would mean either that (1) python isn't installed; or (2) python isn't on your system path.
This question already has an answer here:
How to restore .bash_profile on a mac? None of my unix terminal are working [closed]
(1 answer)
Closed 2 years ago.
I receive this error message each time I launch terminal:
-bash: =/usr/local/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin: No such file or directory
You have recently edited one of your shell's startup files and introduced an error.
Probably, ls -lart ~/.bashrc ~/.bash_profile ~/.profile will indicate which one -- if one or more is missing, that's no concern, we just want to see which one out of these you have edited recently. Examine the time stamps and try to remember what you did to change one of these files.
The error probably looks something like
$oopsPATH=/usr/local/bin:$PATH
where you meant to say
PATH=/usr/local/bin:$PATH
but without access to your files, we can't know what exactly is supposed to be there, or how you messed it up.
See also https://askubuntu.com/questions/198730/how-to-restore-bashrc-file/198740#198740
In the common case where you have messed up your PATH so that ls and other commands are unavailable (bash: ls: command not found), you can use the full path (/bin/ls pro ls, etc; though obviously, you have to know the correct path) at least until you can restore your configuration.
PATH=/usr/local/bin:/usr/bin:/bin
is probably a good crutch until you can find the correct default for your OS. You can type that at the prompt, or put it in one of your shell's startup files and start a new shell.
On many platforms, you can find the default user dot files in /etc/skel so if that's present (which unfortunately will not be true for Mac OS, but should be there on most Linuxes):
cp -b /etc/skel/.bash_profile $HOME/
will replace your (presumably broken beyond repair) .bash_profile with the system default one. (Omit the -b option if your OS doesn't have it, but then you'll want to back up your file manually before replacing it.)
Update: This fragment near the top of your .bash_profile is erroneous:
#loginPath
=/usr/local/bin:$PATH
Just take it out; it doesn't seem to do anything useful. There seem to be multiple additional fragments from the MacPorts installer which look wrong, too, but they are just comments. (Perhaps somehow they shouldn't be?)
It seems that you are missing a necessary PATH and that is why it is saying no such file or directory. If, for example, you get this error message when typing in python, it would mean either that (1) python isn't installed; or (2) python isn't on your system path.
I changed the bash profile while trying to install mongodb and none of my command lines are working on terminal. I read online that I need to fix the $PATH but I can't even access it when none of my commands are working.
Help?
Mistakenly I also ran into same problem where to resolve this I had to reset my PATH variable to basic settings as below :
export PATH="/usr/local/bin:/usr/bin:/bin:/usr/sbin"
Once you set PATH variable now you can open the .bash_profile file in same terminal session only and make changes accordingly. This will resolve your problem.
Ok I found the answer from here:
"Open Terminal, and go to File (or Shell) -> New Command. Type in open -e .profile (or substitute some other file instead of .profile), and hit Run. That should open TextEdit with the file you want to fix; you can remove the offending lines there."
in my case i typed in nano .bash_profile and that allowed me to edit my bash profile and fix the issue.
can't use terminal from error in .bash_profile
Run this in terminal:
export PATH="/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin"
So I'm installing some things for coding and personal usage, and I need to run this in the terminal (I'm on Mac if you didn't read the title).
~/.bash_profile
It just says permission denied, Im running OSX 10.8.4 Mountain Lion. How do I bypass this?
On MacOS: add source ~/.bash_profile to the end of ~/.zshrc.
Then this profile will be in effect when you open zsh.
You would never want to run that, but you may want to source it.
. ~/.bash_profile
source ~/.bash_profile
both should work. But this is an odd request, because that file should be sourced automatically when you start bash, unless you're explicitly starting it non-interactively. From the man page:
When bash is invoked as an interactive login shell, or as a non-interactive shell with the --login option, it first reads and executes commands from the file /etc/profile, if that file exists. After reading that file, it looks for ~/.bash_profile, ~/.bash_login, and ~/.profile, in that order, and reads and executes commands from the first one that exists and is readable. The --noprofile option may be used when the shell is started to inhibit this behavior.
If you change .bash_profile, it only applies to new Terminal sessions.
To apply it to an existing session, run source ~/.bash_profile. You can run any Bash script this way - think of executing source as the same as typing commands in the Terminal window (from the specified script).
More info: How to reload .bash_profile from the command line?
Bonus: You can make environment variables available to OSX applications - not just the current Bash session but apps like Visual Studio Code or IntelliJ - using launchctl setenv GOPATH "${GOPATH:-}"
As #kojiro said, you don't want to "run" this file. Source it as he says. It should get "sourced" at startup. Sourcing just means running every line in the file, including the one you want to get run. If you want to make sure a folder is in a certain path environment variable (as it seems you want from one of your comments on another solution), execute
$ echo $PATH
At the command line. If you want to check that your ~/.bash_profile is being sourced, either at startup as it should be, or when you source it manually, enter the following line into your ~/.bash_profile file:
$ echo "Hello I'm running stuff in the ~/.bash_profile!"
No need to start, it would automatically executed while you startup your mac terminal / bash. Whenever you do a change, you may need to restart the terminal.
~ is the default path for .bash_profile
I was getting this error on zsh(mac os Big Sur 11.3), This is how i solved this :-
Go to Terminal.
cd /users/<yourusername>
Once you reach here issue a command :
ls -al
You will see a lot of files and one specific file .zprofile. This is your user profile. We need to edit this.
After this we need to edit the file. Issue the below command :
nano .zprofile
Once you issue this command file will be opened for edit. Add the path details for maven.
M2_PATH="/Users//code/apache-maven-3.8.1/bin" //add your path of maven diretory
PATH="${PATH}:${M2_PATH}"
export PATH
press ctrl + X and save the file.
Issue command after saving the file :
source .zprofile
Once done, you will be able to run the mvn command.
If the problem is that you are not seeing your changes to the file take effect, just open a new terminal window, and it will be "sourced". You will be able to use the proper PATH etc with each subsequent terminal window.