Related
I'm trying to write a small script to change the current directory to my project directory:
#!/bin/bash
cd /home/tree/projects/java
I saved this file as proj, added execute permission with chmod, and copied it to /usr/bin. When I call it by:
proj, it does nothing. What am I doing wrong?
Shell scripts are run inside a subshell, and each subshell has its own concept of what the current directory is. The cd succeeds, but as soon as the subshell exits, you're back in the interactive shell and nothing ever changed there.
One way to get around this is to use an alias instead:
alias proj="cd /home/tree/projects/java"
You're doing nothing wrong! You've changed the directory, but only within the subshell that runs the script.
You can run the script in your current process with the "dot" command:
. proj
But I'd prefer Greg's suggestion to use an alias in this simple case.
The cd in your script technically worked as it changed the directory of the shell that ran the script, but that was a separate process forked from your interactive shell.
A Posix-compatible way to solve this problem is to define a shell procedure rather than a shell-invoked command script.
jhome () {
cd /home/tree/projects/java
}
You can just type this in or put it in one of the various shell startup files.
The cd is done within the script's shell. When the script ends, that shell exits, and then you are left in the directory you were. "Source" the script, don't run it. Instead of:
./myscript.sh
do
. ./myscript.sh
(Notice the dot and space before the script name.)
To make a bash script that will cd to a select directory :
Create the script file
#!/bin/sh
# file : /scripts/cdjava
#
cd /home/askgelal/projects/java
Then create an alias in your startup file.
#!/bin/sh
# file /scripts/mastercode.sh
#
alias cdjava='. /scripts/cdjava'
I created a startup file where I dump all my aliases and custom functions.
Then I source this file into my .bashrc to have it set on each boot.
For example, create a master aliases/functions file: /scripts/mastercode.sh
(Put the alias in this file.)
Then at the end of your .bashrc file:
source /scripts/mastercode.sh
Now its easy to cd to your java directory, just type cdjava and you are there.
You can use . to execute a script in the current shell environment:
. script_name
or alternatively, its more readable but shell specific alias source:
source script_name
This avoids the subshell, and allows any variables or builtins (including cd) to affect the current shell instead.
Jeremy Ruten's idea of using a symlink triggered a thought that hasn't crossed any other answer. Use:
CDPATH=:$HOME/projects
The leading colon is important; it means that if there is a directory 'dir' in the current directory, then 'cd dir' will change to that, rather than hopping off somewhere else. With the value set as shown, you can do:
cd java
and, if there is no sub-directory called java in the current directory, then it will take you directly to $HOME/projects/java - no aliases, no scripts, no dubious execs or dot commands.
My $HOME is /Users/jleffler; my $CDPATH is:
:/Users/jleffler:/Users/jleffler/mail:/Users/jleffler/src:/Users/jleffler/src/perl:/Users/jleffler/src/sqltools:/Users/jleffler/lib:/Users/jleffler/doc:/Users/jleffler/work
Use exec bash at the end
A bash script operates on its current environment or on that of its
children, but never on its parent environment.
However, this question often gets asked because one wants to be left at a (new) bash prompt in a certain directory after execution of a bash script from within another directory.
If this is the case, simply execute a child bash instance at the end of the script:
#!/usr/bin/env bash
cd /home/tree/projects/java
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
exec bash
To return to the previous, parental bash instance, use Ctrl+D.
Update
At least with newer versions of bash, the exec on the last line is no longer required. Furthermore, the script could be made to work with whatever preferred shell by using the $SHELL environment variable. This then gives:
#!/usr/bin/env bash
cd desired/directory
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
$SHELL
I got my code to work by using. <your file name>
./<your file name> dose not work because it doesn't change your directory in the terminal it just changes the directory specific to that script.
Here is my program
#!/bin/bash
echo "Taking you to eclipse's workspace."
cd /Developer/Java/workspace
Here is my terminal
nova:~ Kael$
nova:~ Kael$ . workspace.sh
Taking you to eclipe's workspace.
nova:workspace Kael$
simply run:
cd /home/xxx/yyy && command_you_want
When you fire a shell script, it runs a new instance of that shell (/bin/bash). Thus, your script just fires up a shell, changes the directory and exits. Put another way, cd (and other such commands) within a shell script do not affect nor have access to the shell from which they were launched.
You can do following:
#!/bin/bash
cd /your/project/directory
# start another shell and replacing the current
exec /bin/bash
EDIT: This could be 'dotted' as well, to prevent creation of subsequent shells.
Example:
. ./previous_script (with or without the first line)
On my particular case i needed too many times to change for the same directory.
So on my .bashrc (I use ubuntu) i've added the
1 -
$ nano ~./bashrc
function switchp
{
cd /home/tree/projects/$1
}
2-
$ source ~/.bashrc
3 -
$ switchp java
Directly it will do: cd /home/tree/projects/java
Hope that helps!
It only changes the directory for the script itself, while your current directory stays the same.
You might want to use a symbolic link instead. It allows you to make a "shortcut" to a file or directory, so you'd only have to type something like cd my-project.
You can combine Adam & Greg's alias and dot approaches to make something that can be more dynamic—
alias project=". project"
Now running the project alias will execute the project script in the current shell as opposed to the subshell.
You can combine an alias and a script,
alias proj="cd \`/usr/bin/proj !*\`"
provided that the script echos the destination path. Note that those are backticks surrounding the script name.
For example, your script could be
#!/bin/bash
echo /home/askgelal/projects/java/$1
The advantage with this technique is that the script could take any number of command line parameters and emit different destinations calculated by possibly complex logic.
to navigate directories quicky, there's $CDPATH, cdargs, and ways to generate aliases automatically
http://jackndempsey.blogspot.com/2008/07/cdargs.html
http://muness.blogspot.com/2008/06/lazy-bash-cd-aliaes.html
https://web.archive.org/web/1/http://articles.techrepublic%2ecom%2ecom/5100-10878_11-5827311.html
In your ~/.bash_profile file. add the next function
move_me() {
cd ~/path/to/dest
}
Restart terminal and you can type
move_me
and you will be moved to the destination folder.
You can use the operator && :
cd myDirectory && ls
While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo "Arguments to the functions were $1, $2, ..."
}
This technique is used by autojump: http://github.com/joelthelion/autojump/wiki to provide you with learning shell directory bookmarks.
You can create a function like below in your .bash_profile and it will work smoothly.
The following function takes an optional parameter which is a project.
For example, you can just run
cdproj
or
cdproj project_name
Here is the function definition.
cdproj(){
dir=/Users/yourname/projects
if [ "$1" ]; then
cd "${dir}/${1}"
else
cd "${dir}"
fi
}
Dont forget to source your .bash_profile
This should do what you want. Change to the directory of interest (from within the script), and then spawn a new bash shell.
#!/bin/bash
# saved as mov_dir.sh
cd ~/mt/v3/rt_linux-rt-tools/
bash
If you run this, it will take you to the directory of interest and when you exit it it will bring you back to the original place.
root#intel-corei7-64:~# ./mov_dir.sh
root#intel-corei7-64:~/mt/v3/rt_linux-rt-tools# exit
root#intel-corei7-64:~#
This will even take you to back to your original directory when you exit (CTRL+d)
I did the following:
create a file called case
paste the following in the file:
#!/bin/sh
cd /home/"$1"
save it and then:
chmod +x case
I also created an alias in my .bashrc:
alias disk='cd /home/; . case'
now when I type:
case 12345
essentially I am typing:
cd /home/12345
You can type any folder after 'case':
case 12
case 15
case 17
which is like typing:
cd /home/12
cd /home/15
cd /home/17
respectively
In my case the path is much longer - these guys summed it up with the ~ info earlier.
As explained on the other answers, you have changed the directory, but only within the sub-shell that runs the script. this does not impact the parent shell.
One solution is to use bash functions instead of a bash script (sh); by placing your bash script code into a function. That makes the function available as a command and then, this will be executed without a child process and thus any cd command will impact the caller shell.
Bash functions :
One feature of the bash profile is to store custom functions that can be run in the terminal or in bash scripts the same way you run application/commands this also could be used as a shortcut for long commands.
To make your function efficient system widely you will need to copy your function at the end of several files
/home/user/.bashrc
/home/user/.bash_profile
/root/.bashrc
/root/.bash_profile
You can sudo kwrite /home/user/.bashrc /home/user/.bash_profile /root/.bashrc /root/.bash_profile to edit/create those files quickly
Howto :
Copy your bash script code inside a new function at the end of your bash's profile file and restart your terminal, you can then run cdd or whatever the function you wrote.
Script Example
Making shortcut to cd .. with cdd
cdd() {
cd ..
}
ls shortcut
ll() {
ls -l -h
}
ls shortcut
lll() {
ls -l -h -a
}
If you are using fish as your shell, the best solution is to create a function. As an example, given the original question, you could copy the 4 lines below and paste them into your fish command line:
function proj
cd /home/tree/projects/java
end
funcsave proj
This will create the function and save it for use later. If your project changes, just repeat the process using the new path.
If you prefer, you can manually add the function file by doing the following:
nano ~/.config/fish/functions/proj.fish
and enter the text:
function proj
cd /home/tree/projects/java
end
and finally press ctrl+x to exit and y followed by return to save your changes.
(NOTE: the first method of using funcsave creates the proj.fish file for you).
You need no script, only set the correct option and create an environment variable.
shopt -s cdable_vars
in your ~/.bashrc allows to cd to the content of environment variables.
Create such an environment variable:
export myjava="/home/tree/projects/java"
and you can use:
cd myjava
Other alternatives.
Note the discussion How do I set the working directory of the parent process?
It contains some hackish answers, e.g.
https://stackoverflow.com/a/2375174/755804 (changing the parent process directory via gdb, don't do this) and https://stackoverflow.com/a/51985735/755804 (the command tailcd that injects cd dirname to the input stream of the parent process; well, ideally it should be a part of bash rather than a hack)
It is an old question, but I am really surprised I don't see this trick here
Instead of using cd you can use
export PWD=the/path/you/want
No need to create subshells or use aliases.
Note that it is your responsibility to make sure the/path/you/want exists.
I have to work in tcsh, and I know this is not an elegant solution, but for example, if I had to change folders to a path where one word is different, the whole thing can be done in the alias
a alias_name 'set a = `pwd`; set b = `echo $a | replace "Trees" "Tests"` ; cd $b'
If the path is always fixed, the just
a alias_name2 'cd path/you/always/need'
should work
In the line above, the new folder path is set
This combines the answer by Serge with an unrelated answer by David. It changes the directory, and then instead of forcing a bash shell, it launches the user's default shell. It however requires both getent and /etc/passwd to detect the default shell.
#!/usr/bin/env bash
cd desired/directory
USER_SHELL=$(getent passwd <USER> | cut -d : -f 7)
$USER_SHELL
Of course this still has the same deficiency of creating a nested shell.
I want to make a file that runs a script, then deletes itself. I know that its root would most likely be "~/Library/Downloads/filename.app". How would I go about having it self destruct? I'm working in script editor.
I'm not sure if I understand correctly as shell script would traditionally have .sh suffix instead of .app one (if any) and I'm not familiar with anything that I'd call "script editor", but alas here's my solution.
If you are in bash environment, you can make use of the BASH_SOURCE array. Provided that you didn't change the current working directory, you can directly call
rm "${BASH_SOURCE[0]}"
(or just rm "$BASH_SOURCE").
If you are using cd or make larger script, it might be advisable to save fully resolved path to the script at the beginning and remove that file at the end (not somewhere in the middle as running bash scripts are NOT independent on their source files*) like so:
#!/bin/bash
self=$(realpath "${BASH_SOURCE[0]}")
#
# code so ugly I want to delete it when I'm done
#
rm "$self"
*Edit shell script while it's running
I'm trying to write a small script to change the current directory to my project directory:
#!/bin/bash
cd /home/tree/projects/java
I saved this file as proj, added execute permission with chmod, and copied it to /usr/bin. When I call it by:
proj, it does nothing. What am I doing wrong?
Shell scripts are run inside a subshell, and each subshell has its own concept of what the current directory is. The cd succeeds, but as soon as the subshell exits, you're back in the interactive shell and nothing ever changed there.
One way to get around this is to use an alias instead:
alias proj="cd /home/tree/projects/java"
You're doing nothing wrong! You've changed the directory, but only within the subshell that runs the script.
You can run the script in your current process with the "dot" command:
. proj
But I'd prefer Greg's suggestion to use an alias in this simple case.
The cd in your script technically worked as it changed the directory of the shell that ran the script, but that was a separate process forked from your interactive shell.
A Posix-compatible way to solve this problem is to define a shell procedure rather than a shell-invoked command script.
jhome () {
cd /home/tree/projects/java
}
You can just type this in or put it in one of the various shell startup files.
The cd is done within the script's shell. When the script ends, that shell exits, and then you are left in the directory you were. "Source" the script, don't run it. Instead of:
./myscript.sh
do
. ./myscript.sh
(Notice the dot and space before the script name.)
To make a bash script that will cd to a select directory :
Create the script file
#!/bin/sh
# file : /scripts/cdjava
#
cd /home/askgelal/projects/java
Then create an alias in your startup file.
#!/bin/sh
# file /scripts/mastercode.sh
#
alias cdjava='. /scripts/cdjava'
I created a startup file where I dump all my aliases and custom functions.
Then I source this file into my .bashrc to have it set on each boot.
For example, create a master aliases/functions file: /scripts/mastercode.sh
(Put the alias in this file.)
Then at the end of your .bashrc file:
source /scripts/mastercode.sh
Now its easy to cd to your java directory, just type cdjava and you are there.
You can use . to execute a script in the current shell environment:
. script_name
or alternatively, its more readable but shell specific alias source:
source script_name
This avoids the subshell, and allows any variables or builtins (including cd) to affect the current shell instead.
Jeremy Ruten's idea of using a symlink triggered a thought that hasn't crossed any other answer. Use:
CDPATH=:$HOME/projects
The leading colon is important; it means that if there is a directory 'dir' in the current directory, then 'cd dir' will change to that, rather than hopping off somewhere else. With the value set as shown, you can do:
cd java
and, if there is no sub-directory called java in the current directory, then it will take you directly to $HOME/projects/java - no aliases, no scripts, no dubious execs or dot commands.
My $HOME is /Users/jleffler; my $CDPATH is:
:/Users/jleffler:/Users/jleffler/mail:/Users/jleffler/src:/Users/jleffler/src/perl:/Users/jleffler/src/sqltools:/Users/jleffler/lib:/Users/jleffler/doc:/Users/jleffler/work
Use exec bash at the end
A bash script operates on its current environment or on that of its
children, but never on its parent environment.
However, this question often gets asked because one wants to be left at a (new) bash prompt in a certain directory after execution of a bash script from within another directory.
If this is the case, simply execute a child bash instance at the end of the script:
#!/usr/bin/env bash
cd /home/tree/projects/java
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
exec bash
To return to the previous, parental bash instance, use Ctrl+D.
Update
At least with newer versions of bash, the exec on the last line is no longer required. Furthermore, the script could be made to work with whatever preferred shell by using the $SHELL environment variable. This then gives:
#!/usr/bin/env bash
cd desired/directory
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
$SHELL
I got my code to work by using. <your file name>
./<your file name> dose not work because it doesn't change your directory in the terminal it just changes the directory specific to that script.
Here is my program
#!/bin/bash
echo "Taking you to eclipse's workspace."
cd /Developer/Java/workspace
Here is my terminal
nova:~ Kael$
nova:~ Kael$ . workspace.sh
Taking you to eclipe's workspace.
nova:workspace Kael$
simply run:
cd /home/xxx/yyy && command_you_want
When you fire a shell script, it runs a new instance of that shell (/bin/bash). Thus, your script just fires up a shell, changes the directory and exits. Put another way, cd (and other such commands) within a shell script do not affect nor have access to the shell from which they were launched.
You can do following:
#!/bin/bash
cd /your/project/directory
# start another shell and replacing the current
exec /bin/bash
EDIT: This could be 'dotted' as well, to prevent creation of subsequent shells.
Example:
. ./previous_script (with or without the first line)
On my particular case i needed too many times to change for the same directory.
So on my .bashrc (I use ubuntu) i've added the
1 -
$ nano ~./bashrc
function switchp
{
cd /home/tree/projects/$1
}
2-
$ source ~/.bashrc
3 -
$ switchp java
Directly it will do: cd /home/tree/projects/java
Hope that helps!
It only changes the directory for the script itself, while your current directory stays the same.
You might want to use a symbolic link instead. It allows you to make a "shortcut" to a file or directory, so you'd only have to type something like cd my-project.
You can combine Adam & Greg's alias and dot approaches to make something that can be more dynamic—
alias project=". project"
Now running the project alias will execute the project script in the current shell as opposed to the subshell.
You can combine an alias and a script,
alias proj="cd \`/usr/bin/proj !*\`"
provided that the script echos the destination path. Note that those are backticks surrounding the script name.
For example, your script could be
#!/bin/bash
echo /home/askgelal/projects/java/$1
The advantage with this technique is that the script could take any number of command line parameters and emit different destinations calculated by possibly complex logic.
to navigate directories quicky, there's $CDPATH, cdargs, and ways to generate aliases automatically
http://jackndempsey.blogspot.com/2008/07/cdargs.html
http://muness.blogspot.com/2008/06/lazy-bash-cd-aliaes.html
https://web.archive.org/web/1/http://articles.techrepublic%2ecom%2ecom/5100-10878_11-5827311.html
In your ~/.bash_profile file. add the next function
move_me() {
cd ~/path/to/dest
}
Restart terminal and you can type
move_me
and you will be moved to the destination folder.
You can use the operator && :
cd myDirectory && ls
While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo "Arguments to the functions were $1, $2, ..."
}
This technique is used by autojump: http://github.com/joelthelion/autojump/wiki to provide you with learning shell directory bookmarks.
You can create a function like below in your .bash_profile and it will work smoothly.
The following function takes an optional parameter which is a project.
For example, you can just run
cdproj
or
cdproj project_name
Here is the function definition.
cdproj(){
dir=/Users/yourname/projects
if [ "$1" ]; then
cd "${dir}/${1}"
else
cd "${dir}"
fi
}
Dont forget to source your .bash_profile
This should do what you want. Change to the directory of interest (from within the script), and then spawn a new bash shell.
#!/bin/bash
# saved as mov_dir.sh
cd ~/mt/v3/rt_linux-rt-tools/
bash
If you run this, it will take you to the directory of interest and when you exit it it will bring you back to the original place.
root#intel-corei7-64:~# ./mov_dir.sh
root#intel-corei7-64:~/mt/v3/rt_linux-rt-tools# exit
root#intel-corei7-64:~#
This will even take you to back to your original directory when you exit (CTRL+d)
I did the following:
create a file called case
paste the following in the file:
#!/bin/sh
cd /home/"$1"
save it and then:
chmod +x case
I also created an alias in my .bashrc:
alias disk='cd /home/; . case'
now when I type:
case 12345
essentially I am typing:
cd /home/12345
You can type any folder after 'case':
case 12
case 15
case 17
which is like typing:
cd /home/12
cd /home/15
cd /home/17
respectively
In my case the path is much longer - these guys summed it up with the ~ info earlier.
As explained on the other answers, you have changed the directory, but only within the sub-shell that runs the script. this does not impact the parent shell.
One solution is to use bash functions instead of a bash script (sh); by placing your bash script code into a function. That makes the function available as a command and then, this will be executed without a child process and thus any cd command will impact the caller shell.
Bash functions :
One feature of the bash profile is to store custom functions that can be run in the terminal or in bash scripts the same way you run application/commands this also could be used as a shortcut for long commands.
To make your function efficient system widely you will need to copy your function at the end of several files
/home/user/.bashrc
/home/user/.bash_profile
/root/.bashrc
/root/.bash_profile
You can sudo kwrite /home/user/.bashrc /home/user/.bash_profile /root/.bashrc /root/.bash_profile to edit/create those files quickly
Howto :
Copy your bash script code inside a new function at the end of your bash's profile file and restart your terminal, you can then run cdd or whatever the function you wrote.
Script Example
Making shortcut to cd .. with cdd
cdd() {
cd ..
}
ls shortcut
ll() {
ls -l -h
}
ls shortcut
lll() {
ls -l -h -a
}
If you are using fish as your shell, the best solution is to create a function. As an example, given the original question, you could copy the 4 lines below and paste them into your fish command line:
function proj
cd /home/tree/projects/java
end
funcsave proj
This will create the function and save it for use later. If your project changes, just repeat the process using the new path.
If you prefer, you can manually add the function file by doing the following:
nano ~/.config/fish/functions/proj.fish
and enter the text:
function proj
cd /home/tree/projects/java
end
and finally press ctrl+x to exit and y followed by return to save your changes.
(NOTE: the first method of using funcsave creates the proj.fish file for you).
You need no script, only set the correct option and create an environment variable.
shopt -s cdable_vars
in your ~/.bashrc allows to cd to the content of environment variables.
Create such an environment variable:
export myjava="/home/tree/projects/java"
and you can use:
cd myjava
Other alternatives.
Note the discussion How do I set the working directory of the parent process?
It contains some hackish answers, e.g.
https://stackoverflow.com/a/2375174/755804 (changing the parent process directory via gdb, don't do this) and https://stackoverflow.com/a/51985735/755804 (the command tailcd that injects cd dirname to the input stream of the parent process; well, ideally it should be a part of bash rather than a hack)
It is an old question, but I am really surprised I don't see this trick here
Instead of using cd you can use
export PWD=the/path/you/want
No need to create subshells or use aliases.
Note that it is your responsibility to make sure the/path/you/want exists.
I have to work in tcsh, and I know this is not an elegant solution, but for example, if I had to change folders to a path where one word is different, the whole thing can be done in the alias
a alias_name 'set a = `pwd`; set b = `echo $a | replace "Trees" "Tests"` ; cd $b'
If the path is always fixed, the just
a alias_name2 'cd path/you/always/need'
should work
In the line above, the new folder path is set
This combines the answer by Serge with an unrelated answer by David. It changes the directory, and then instead of forcing a bash shell, it launches the user's default shell. It however requires both getent and /etc/passwd to detect the default shell.
#!/usr/bin/env bash
cd desired/directory
USER_SHELL=$(getent passwd <USER> | cut -d : -f 7)
$USER_SHELL
Of course this still has the same deficiency of creating a nested shell.
I am trying to run the next code on bash. It is suppose to work but it does not.
Can you help me to fix it? I am starting with programming.
The code is this:
for i in {1:5}
do
cd path-to-folder-number/"$i"0/
echo path-to-folder-number/"$i"0/
done
EXAMPLE
I want to iterate over folders which have numbers (10,20..50), and so it changes directory from "path-to-folder-number/10/" to "path-to-folder-number/20/" ..etc
I replace : with .. but it is not working yet. When the script is applied i get:
can't cd to path-to-folder-number/{1..5}0/
I think there are three problems here: you're using the wrong shell, the wrong syntax for a range, and if you solved those problems you may also have trouble with successive cds not doing what you want.
The shell problem is that you're running the script with sh instead of bash. On some systems sh is actually bash (but running in POSIX compatibility mode, with some advanced features turned off), but I think on your system it's a more basic shell that doesn't have any of the bash extensions.
The best way to control which shell a script runs with is to add a "shebang" line at the beginning that says what interpreter to run it with. For bash, that'd be either #!/bin/bash or #!/usr/bin/env bash. Then run the script by either placing it in a directory that's in your $PATH, or explicitly giving the path to the script (e.g. with ./scriptname if you're in the same directory it's in). Do not run it with sh scriptname, because that'll override the shebang and use the basic shell, and it won't work.
(BTW, the name "shebang" comes from the "#!" characters the line starts with -- the "#" character is sometimes called "sharp", and "!" is sometimes called "bang", so it's "sharp-bang", which gets abbreviated to "shebang".)
In bash, the correct syntax for a range in a brace expansion is {1..5}, not {1:5}. Note that brace expansions are a bash extension, which is why getting the right shell matters.
Finally, a problem you haven't actually run into yet, but may when you get the first two problems fixed: you cd to path-to-folder-number/10/, and then path-to-folder-number/20/, etc. You are not cding back to the original directory in between, so if the path-to-folder-number is relative (i.e. doesn't start with "/"), it's going to try to cd to path-to-folder-number/10/path-to-folder-number/20/path-to-folder-number/30/path-to-folder-number/40/path-to-folder-number/50/.
IMO using cd in scripts is generally a bad idea, because there are a number of things that can go wrong. It's easy to lose track of where the script is going to be at which point. If any cd fails for any reason, then the rest of the script will be running in the wrong place. And if you have any files specified by relative paths, those paths become invalid as soon as you cd someplace other than the original directory.
It's much less fragile to just use explicit paths to refer to file locations within the script. So, for example, instead of cd "path-to-folder-number/${i}0/"; ls, use ls "path-to-folder-number/${i}0/".
For up ranges the syntax is:
for i in {1..5}
do
cd path-to-folder-number/"$i"0/
echo $i
done
So replace the : with ..
To get exactly what you want you can use this:
for i in 10 {20..50}
do
echo $i
done
You can also use seq :
for i in $(seq 10 10 50); do
cd path-to-folder-number/$i/
echo path-to-folder-number/$i/
done
I'm trying to write a small script to change the current directory to my project directory:
#!/bin/bash
cd /home/tree/projects/java
I saved this file as proj, added execute permission with chmod, and copied it to /usr/bin. When I call it by:
proj, it does nothing. What am I doing wrong?
Shell scripts are run inside a subshell, and each subshell has its own concept of what the current directory is. The cd succeeds, but as soon as the subshell exits, you're back in the interactive shell and nothing ever changed there.
One way to get around this is to use an alias instead:
alias proj="cd /home/tree/projects/java"
You're doing nothing wrong! You've changed the directory, but only within the subshell that runs the script.
You can run the script in your current process with the "dot" command:
. proj
But I'd prefer Greg's suggestion to use an alias in this simple case.
The cd in your script technically worked as it changed the directory of the shell that ran the script, but that was a separate process forked from your interactive shell.
A Posix-compatible way to solve this problem is to define a shell procedure rather than a shell-invoked command script.
jhome () {
cd /home/tree/projects/java
}
You can just type this in or put it in one of the various shell startup files.
The cd is done within the script's shell. When the script ends, that shell exits, and then you are left in the directory you were. "Source" the script, don't run it. Instead of:
./myscript.sh
do
. ./myscript.sh
(Notice the dot and space before the script name.)
To make a bash script that will cd to a select directory :
Create the script file
#!/bin/sh
# file : /scripts/cdjava
#
cd /home/askgelal/projects/java
Then create an alias in your startup file.
#!/bin/sh
# file /scripts/mastercode.sh
#
alias cdjava='. /scripts/cdjava'
I created a startup file where I dump all my aliases and custom functions.
Then I source this file into my .bashrc to have it set on each boot.
For example, create a master aliases/functions file: /scripts/mastercode.sh
(Put the alias in this file.)
Then at the end of your .bashrc file:
source /scripts/mastercode.sh
Now its easy to cd to your java directory, just type cdjava and you are there.
You can use . to execute a script in the current shell environment:
. script_name
or alternatively, its more readable but shell specific alias source:
source script_name
This avoids the subshell, and allows any variables or builtins (including cd) to affect the current shell instead.
Jeremy Ruten's idea of using a symlink triggered a thought that hasn't crossed any other answer. Use:
CDPATH=:$HOME/projects
The leading colon is important; it means that if there is a directory 'dir' in the current directory, then 'cd dir' will change to that, rather than hopping off somewhere else. With the value set as shown, you can do:
cd java
and, if there is no sub-directory called java in the current directory, then it will take you directly to $HOME/projects/java - no aliases, no scripts, no dubious execs or dot commands.
My $HOME is /Users/jleffler; my $CDPATH is:
:/Users/jleffler:/Users/jleffler/mail:/Users/jleffler/src:/Users/jleffler/src/perl:/Users/jleffler/src/sqltools:/Users/jleffler/lib:/Users/jleffler/doc:/Users/jleffler/work
Use exec bash at the end
A bash script operates on its current environment or on that of its
children, but never on its parent environment.
However, this question often gets asked because one wants to be left at a (new) bash prompt in a certain directory after execution of a bash script from within another directory.
If this is the case, simply execute a child bash instance at the end of the script:
#!/usr/bin/env bash
cd /home/tree/projects/java
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
exec bash
To return to the previous, parental bash instance, use Ctrl+D.
Update
At least with newer versions of bash, the exec on the last line is no longer required. Furthermore, the script could be made to work with whatever preferred shell by using the $SHELL environment variable. This then gives:
#!/usr/bin/env bash
cd desired/directory
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
$SHELL
I got my code to work by using. <your file name>
./<your file name> dose not work because it doesn't change your directory in the terminal it just changes the directory specific to that script.
Here is my program
#!/bin/bash
echo "Taking you to eclipse's workspace."
cd /Developer/Java/workspace
Here is my terminal
nova:~ Kael$
nova:~ Kael$ . workspace.sh
Taking you to eclipe's workspace.
nova:workspace Kael$
simply run:
cd /home/xxx/yyy && command_you_want
When you fire a shell script, it runs a new instance of that shell (/bin/bash). Thus, your script just fires up a shell, changes the directory and exits. Put another way, cd (and other such commands) within a shell script do not affect nor have access to the shell from which they were launched.
You can do following:
#!/bin/bash
cd /your/project/directory
# start another shell and replacing the current
exec /bin/bash
EDIT: This could be 'dotted' as well, to prevent creation of subsequent shells.
Example:
. ./previous_script (with or without the first line)
On my particular case i needed too many times to change for the same directory.
So on my .bashrc (I use ubuntu) i've added the
1 -
$ nano ~./bashrc
function switchp
{
cd /home/tree/projects/$1
}
2-
$ source ~/.bashrc
3 -
$ switchp java
Directly it will do: cd /home/tree/projects/java
Hope that helps!
It only changes the directory for the script itself, while your current directory stays the same.
You might want to use a symbolic link instead. It allows you to make a "shortcut" to a file or directory, so you'd only have to type something like cd my-project.
You can combine Adam & Greg's alias and dot approaches to make something that can be more dynamic—
alias project=". project"
Now running the project alias will execute the project script in the current shell as opposed to the subshell.
You can combine an alias and a script,
alias proj="cd \`/usr/bin/proj !*\`"
provided that the script echos the destination path. Note that those are backticks surrounding the script name.
For example, your script could be
#!/bin/bash
echo /home/askgelal/projects/java/$1
The advantage with this technique is that the script could take any number of command line parameters and emit different destinations calculated by possibly complex logic.
to navigate directories quicky, there's $CDPATH, cdargs, and ways to generate aliases automatically
http://jackndempsey.blogspot.com/2008/07/cdargs.html
http://muness.blogspot.com/2008/06/lazy-bash-cd-aliaes.html
https://web.archive.org/web/1/http://articles.techrepublic%2ecom%2ecom/5100-10878_11-5827311.html
In your ~/.bash_profile file. add the next function
move_me() {
cd ~/path/to/dest
}
Restart terminal and you can type
move_me
and you will be moved to the destination folder.
You can use the operator && :
cd myDirectory && ls
While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo "Arguments to the functions were $1, $2, ..."
}
This technique is used by autojump: http://github.com/joelthelion/autojump/wiki to provide you with learning shell directory bookmarks.
You can create a function like below in your .bash_profile and it will work smoothly.
The following function takes an optional parameter which is a project.
For example, you can just run
cdproj
or
cdproj project_name
Here is the function definition.
cdproj(){
dir=/Users/yourname/projects
if [ "$1" ]; then
cd "${dir}/${1}"
else
cd "${dir}"
fi
}
Dont forget to source your .bash_profile
This should do what you want. Change to the directory of interest (from within the script), and then spawn a new bash shell.
#!/bin/bash
# saved as mov_dir.sh
cd ~/mt/v3/rt_linux-rt-tools/
bash
If you run this, it will take you to the directory of interest and when you exit it it will bring you back to the original place.
root#intel-corei7-64:~# ./mov_dir.sh
root#intel-corei7-64:~/mt/v3/rt_linux-rt-tools# exit
root#intel-corei7-64:~#
This will even take you to back to your original directory when you exit (CTRL+d)
I did the following:
create a file called case
paste the following in the file:
#!/bin/sh
cd /home/"$1"
save it and then:
chmod +x case
I also created an alias in my .bashrc:
alias disk='cd /home/; . case'
now when I type:
case 12345
essentially I am typing:
cd /home/12345
You can type any folder after 'case':
case 12
case 15
case 17
which is like typing:
cd /home/12
cd /home/15
cd /home/17
respectively
In my case the path is much longer - these guys summed it up with the ~ info earlier.
As explained on the other answers, you have changed the directory, but only within the sub-shell that runs the script. this does not impact the parent shell.
One solution is to use bash functions instead of a bash script (sh); by placing your bash script code into a function. That makes the function available as a command and then, this will be executed without a child process and thus any cd command will impact the caller shell.
Bash functions :
One feature of the bash profile is to store custom functions that can be run in the terminal or in bash scripts the same way you run application/commands this also could be used as a shortcut for long commands.
To make your function efficient system widely you will need to copy your function at the end of several files
/home/user/.bashrc
/home/user/.bash_profile
/root/.bashrc
/root/.bash_profile
You can sudo kwrite /home/user/.bashrc /home/user/.bash_profile /root/.bashrc /root/.bash_profile to edit/create those files quickly
Howto :
Copy your bash script code inside a new function at the end of your bash's profile file and restart your terminal, you can then run cdd or whatever the function you wrote.
Script Example
Making shortcut to cd .. with cdd
cdd() {
cd ..
}
ls shortcut
ll() {
ls -l -h
}
ls shortcut
lll() {
ls -l -h -a
}
If you are using fish as your shell, the best solution is to create a function. As an example, given the original question, you could copy the 4 lines below and paste them into your fish command line:
function proj
cd /home/tree/projects/java
end
funcsave proj
This will create the function and save it for use later. If your project changes, just repeat the process using the new path.
If you prefer, you can manually add the function file by doing the following:
nano ~/.config/fish/functions/proj.fish
and enter the text:
function proj
cd /home/tree/projects/java
end
and finally press ctrl+x to exit and y followed by return to save your changes.
(NOTE: the first method of using funcsave creates the proj.fish file for you).
You need no script, only set the correct option and create an environment variable.
shopt -s cdable_vars
in your ~/.bashrc allows to cd to the content of environment variables.
Create such an environment variable:
export myjava="/home/tree/projects/java"
and you can use:
cd myjava
Other alternatives.
Note the discussion How do I set the working directory of the parent process?
It contains some hackish answers, e.g.
https://stackoverflow.com/a/2375174/755804 (changing the parent process directory via gdb, don't do this) and https://stackoverflow.com/a/51985735/755804 (the command tailcd that injects cd dirname to the input stream of the parent process; well, ideally it should be a part of bash rather than a hack)
It is an old question, but I am really surprised I don't see this trick here
Instead of using cd you can use
export PWD=the/path/you/want
No need to create subshells or use aliases.
Note that it is your responsibility to make sure the/path/you/want exists.
I have to work in tcsh, and I know this is not an elegant solution, but for example, if I had to change folders to a path where one word is different, the whole thing can be done in the alias
a alias_name 'set a = `pwd`; set b = `echo $a | replace "Trees" "Tests"` ; cd $b'
If the path is always fixed, the just
a alias_name2 'cd path/you/always/need'
should work
In the line above, the new folder path is set
This combines the answer by Serge with an unrelated answer by David. It changes the directory, and then instead of forcing a bash shell, it launches the user's default shell. It however requires both getent and /etc/passwd to detect the default shell.
#!/usr/bin/env bash
cd desired/directory
USER_SHELL=$(getent passwd <USER> | cut -d : -f 7)
$USER_SHELL
Of course this still has the same deficiency of creating a nested shell.