With a 14" LCD monitor (1366x768), my VS2010 can only display 21 lines in code editor. There are too many tool bars occupied upper and bottom part (see below screenshot). When writing codes, it's OK to use fullscreen mode. However, when reading codes, I need some of the toolbar like the bookmark bar, open file tab. Is there any suggestion to increase the viewing area?
Create a single custom toolbar with just the commands you really use in it. Remove the other toolbars. Close tool windows docked at the bottom.
There is an addon that can even remove the menu bar – you'll need to learn keyboard shortcuts (this is a good idea anyway: moving a hand to/from the mouse is much slower).
Increase secreen resolution
Use a different font such as Terminal or Consolas. I guess you must be already using Consolas, try Terminal.
Decrease the font size.
Turn monitor by 90 degree, so it is higher not wider.
Besides that - get a decent monitor. 14" is barely legal acording to some european laws for office use. Programmers tyically get a lot bigger.
Customize your toolbars and get rid of the buttons you don't use. You'll probably be able to fit everything on one row after that.
For example, I don't think I have used the toolbar buttons for cut/copy/paste, using the keyboard instead, so those were the first buttons I removed.
On the right side of each toolbar, there is a button with an arrow, click on that and you should see "customize this toolbar" in the drop-down menu.
Well, if you are having an older notebook, you might not able to change your display, increase your screen resolution or turn the monitor by 90 degrees, like the others suggested. Here are my suggestions for when this is the case:
Place your toolbars left or right instead at the top or bottom
close output window
use fullscreen mode and learn keyboard shortcuts for bookmarks and file menu functions, so you can work without the specfic toolbars
I use Full Screen mode (ALT+SHIFT+ENTER to toggle) when doing the actual editing, with only the solution explorer open on the right hand side.
Related
Photoshop CS2 always stay on top, even when I click another app from the windows taskbar (right of the start button).
It's completly annoying me. Always need minimized, click the other app, reclick again on photoshop, re-reminimized.
I only have 1 screen at work so I can't let photoshop on one screen and work with the other app on the other screen.
I look in all photoshop menu, find nothing
I googled the problem, and find a adobe page explain this problem is a "feature".
I only want photoshop cs2 work all other app on windows and loose focus, let new app appear on top.
Thank you.
I had this problem and somehow solved it. But my solution may be just as fickle as why the problem occurs in the first place. But here's what I did:
On the layers palette (F7) I clicked on the small arrow just below the close "X" button, on the right. Then I selected "Pallete Options"
Didn't change any options but just clicked OK.
Now the entire window remained on top, not just the palettes. So I restarted Photoshop and it seemed to fix the issue.
I found that if you open up "edit > preferences > Memory & Image Cache" and set your memory usage up then it will fix it. I am on a Windows 10.
See this post:
https://www.reddit.com/r/photoshop/comments/35lmtu/photoshop_keeps_putting_itself_in_front_of_my/
Go to Edit > Preferences > File Handling > Uncheck Enable Version Cue Workgroup File Management
I literally JUST found this on accident and fixed it after having issues with all my toolbars being hidden behind stuff, and not being able to minimize without clicking on the PS window first etc. Seems to have worked!
Topmost Toggle will help you: http://www.softpedia.com/get/Desktop-Enhancements/Other-Desktop-Enhancements/TopmostToggle.shtml
Works for CS2 even in Win8
Try Topmost Toggle. Works on Window 7, Window 8 and even Windows 8.1. I use it for disabling Photoshop CS2 and when Firefox bug out. Works like a charm and it's pretty easy to use:
Download and extract Topmost Toggle
Run the program - you will see that it minimize on tray
Ctr + Right click on your program and click
Enjoy!
Big thanks to user2761076
I am having same issue with CS2 on Windows 7 64 bit. To work around, I hit tab on keyboard when photoshop window is active, that makes all pallets invisible, then I can switch to any window I need to work on.
As per this article there seem to be issue with Microsoft update https://forums.adobe.com/thread/2142314
Is it possible to quickly hide what's on a particular monitor in Visual Studio? Similar to Norton Commander where you could easily hide left or right panel, I want to quickly hide all panels on one of the monitors to see behind them. Is it possible, maybe with a plugin?
Yes, you can.
For that, you need Visual Studio Professional and Productivity Power Tools extension. (You can install it with VS2010 Extension Manager)
PPT allows Floating Tab Wells: You can dock floating document windows on a separate monitor just like tool windows. There’s also an option now which allows you to open documents as floating by default.
Every Tab group has a minimize button. You can minimize the main window without minimize the tab floating panel, and vice-versa.
In my case, I have my main window at left and floating tab at right. If I want to see behind my right monitor, I just minimize the tab group only. With that I see the code at main window and whatever has behind the tab at right side.
For more information: http://blogs.msdn.com/b/visualstudio/archive/2010/06/10/document-well-2010-plus.aspx
Hope this helps.
I recently upgraded to a dual monitor setup at work, and while the extra real estate is very nice, there's one annoyance: my intuitive reaction is that there are two "active" windows now, namely the topmost window in each monitor -- and I frequently get surprised when keyboard events go to the actual active window, rather than the one I've moused over and am looking at.
There's a setting in the control panel that gives this effect (ease of access -> make the mouse easier to use -> activate a window by hovering over it with the mouse) but it also acts on windows within the same monitor, which I don't want.
I frequently use my ThinkPad's scrolling function on unfocused windows which I don't want to receive focus, which come to think of it probably adds to my confusion, since I can scroll my email in the other window but my keyboard shortcuts don't go there.
Is there any way to achieve this effect or am I just wishing?
Thanks,
Ryan
Yeah, get a Mac :-p
In all seriousness OS X does provide this functionality. It might be worth searching for an add on that does the same sort of thing. I know of Wizmouse -- http://antibody-software.com/web/software/software/wizmouse-makes-your-mouse-wheel-work-on-the-window-under-the-mouse/
There might be more though.
AT LAST!!! Windows 10 has this support :-)
SM
You can change the settings to use classic windows appearance etc. and try to focus on the border color of the window. The board changes on the active window.
I use two monitors and there really isn't much you can do besides change your behavior.
Select things from the taskbar, drag active windows to the same screen and always refer to inactive windows by moving them to the inactive windows monitor and remember to go back to the window you want to be active.
This is really driving me crazy !!
I am sure many developers out there love this feature, when tool tabs come darting out on mouseovers, like a jack russell on a double espresso, but it drives me insane.
I am partially signted and frequently have to locate my mouse pointer by shaking the mouse to move the pointer to a particular corner or side of the screen, so having things flyout all over the place, especially when some tools have to waste more time painting themsleves, makes me wanna scream.
If anyone knows how to turn this off, I would be gratefull and it would be even better if I could disable it for all of windows.
My thinking is that, if I wanna see something I will click and when I am done with it I will click away, is that really so hard.
Many thanks in advance
UPDATE
So I figured out that this is a Windows-wide delay setting for mouse over, menu behaviour
specified in the registry in number of milliseconds
HKEY_CURRENT_USER\Control Panel\Desktop\MenuShowDelay.
Mine was set to 8, and is the reason my menus were so frantic.
I changed this to the maximum allowable value of 65534 and no all my menus, submenus and tool windows only come out when I click them
So I figured out that this is a Windows-wide delay setting for mouse over, menu behaviour specified in the registry in number of milliseconds
HKEY_CURRENT_USER\Control Panel\Desktop\MenuShowDelay.
Mine was set to 8, and is the reason my menus were so frantic.
I changed this to the maximum allowable value of 65534 and no all my menus, submenus and tool windows only come out when I click them
I typically turn those default tabbed tools off. (close the windows) But I think the option you are looking for is Tools > Options > Environment > General > "Animate Environment Tools".
You know the neat text zoom feature in VS2010 where you hold down Ctrl and then use your scroll wheel? Well, this seems to happen by default (and without ever pressing Ctrl) to nearly every file I open.
Usually I open a file and have to scroll to some lower point, but instead it starts zooming the text! I have found that by tapping the Ctrl key VS then realizes that it should scroll instead of zoom, but it's still very annoying.
Any ideas?
CTR+Shift worked for me.
(Works for Microsoft Office as well)
I believe they consider this to be a feature, and I haven't found a way to turn it off. I think it only happens if you are holding the control key while trying to use the mouse wheel, but I've found it gets locked in that mode sometimes. Personally I think this feature is anoying as &^%% and I wish they would take it out.
Check your Accessibility settings, you might have "locked" it down my accident
Under Windows 7 they are here:
Control Panel\Ease of Access\Ease of Access Center