Double "gsub" Variable - ruby

Is it possible to use variables in both fields of the gsub method ?
I'm trying to get this piece of code work :
$I = 0
def random_image
$I.to_s
random = rand(1).to_s
logo = File.read('logo-standart.txt')
logo_aleatoire = logo.gsub(/#{$I}/, random)
File.open('logo-standart.txt', "w") {|file| File.puts logo_aleatoire}
$I.to_i
$I += 1
end
Thanks in advance !

filecontents = File.read('logo-standart.txt')
filecontents.gsub!(/\d+/){rand(100)}
File.open("logo-standart.txt","w"){|f| f << filecontents }
The magic line is the second line.
The gsub! function modifies the string in-place, unlike the gsub function, which would return a new string and leave the first string unmodified.
The single parameter that I passed to gsub! is the pattern to match. Here, the goal is to match any string of one or more digits -- this is the number that you're going to replace. There's no need to loop through all of the possible numbers running gsub on each one. You can even match numbers as high as a googol (or higher) without your program taking longer and longer to run.
The block that gsub! takes is evaluated each time the pattern matches to programmatically generate a replacement number. So each time, you get a different random number. This is different from the more usual form of gsub! that takes two parameters -- there the parameter is evaluated once before any pattern matching occurs, and all matches are replaced by the same string.
Note that the way this is structured, you get a new random number for each match. So if the number 307 appears twice, it turns into two different random numbers.
If you wanted to map 307 to the same random number each time, you could do the following:
filecontents = File.read('logo-standart.txt')
randomnumbers = Hash.new{|h,k| h[k]=rand(100)}
filecontents.gsub!(/\d+/){|match| randomnumbers[match]}
File.open("logo-standart.txt","w"){|f| f << filecontents }
Here, randomnumbers is a hash that lets you look up the numbers and find what random number they correspond to. The block passed when constructing the hash tells the hash what to do when it finds a number that it hasn't seen before -- in this case, generate a new random number, and remember what that random number the mapping. So gsub!'s block just asks the hash to map numbers for it, and randomnumbers takes care of generating a new random number when you encounter a new number from the original file.

Related

In TI-BASIC, how do I add a variable in the middle of a String?

I am wondering how to make something where if X=5 and Y=2, then have it output something like
Hello 2 World 5.
In Java I would do
String a = "Hello " + Y + " World " + X;
System.out.println(a);
So how would I do that in TI-BASIC?
You have two issues to work out, concatenating strings and converting integers to a string representation.
String concatenation is very straightforward and utilizes the + operator. In your example:
"Hello " + "World"
Will yield the string "Hello World'.
Converting numbers to strings is not as easy in TI-BASIC, but a method for doing so compatible with the TI-83+/84+ series is available here. The following code and explanation are quoted from the linked page:
:"?
:For(X,1,1+log(N
:sub("0123456789",ipart(10fpart(N10^(-X)))+1,1)+Ans
:End
:sub(Ans,1,length(Ans)-1?Str1
With our number stored in N, we loop through each digit of N and store
the numeric character to our string that is at the matching position
in our substring. You access the individual digit in the number by
using iPart(10fPart(A/10^(X, and then locate where it is in the string
"0123456789". The reason you need to add 1 is so that it works with
the 0 digit.
In order to construct a string with all of the digits of the number, we first create a dummy string. This is what the "? is used
for. Each time through the For( loop, we concatenate the string from
before (which is still stored in the Ans variable) to the next numeric
character that is found in N. Using Ans allows us to not have to use
another string variable, since Ans can act like a string and it gets
updated accordingly, and Ans is also faster than a string variable.
By the time we are done with the For( loop, all of our numeric characters are put together in Ans. However, because we stored a dummy
character to the string initially, we now need to remove it, which we
do by getting the substring from the first character to the second to
last character of the string. Finally, we store the string to a more
permanent variable (in this case, Str1) for future use.
Once converted to a string, you can simply use the + operator to concatenate your string literals with the converted number strings.
You should also take a look at a similar Stack Overflow question which addresses a similar issue.
For this issue you can use the toString( function which was introduced in version 5.2.0. This function translates a number to a string which you can use to display numbers and strings together easily. It would end up like this:
Disp "Hello "+toString(Y)+" World "+toString(X)
If you know the length of "Hello" and "World," then you can simply use Output() because Disp creates a new line after every statement.

how do i make my code read random lines 37 different times?

def pick_random_line
chosen_line = nil
File.foreach("id'sForCascade.txt").each_with_index do |line, id|
chosen_line = line if rand < 1.0/(id+1)
end
return chosen_line
end`enter code here
Hey, i'm trying to make that code pick 37 different lines. So how would I do that i'm stuck and confused.
Assuming you don't want the same line to repeat more than once, I would do it in one line like this:
File.read("test.txt").split("\n").shuffle.first(37)
File.read("test.txt") reads the entire file.
split("\n") splits the file to lines based on the \n delimiter (I assume your file is textual and have lines separated by new line character).
shuffle is a very convenient method of Array that shuffles the lines randomly. You can read about it here:
http://docs.ruby-lang.org/en/2.0.0/Array.html#method-i-shuffle
Finally, first(37) gives you the first 37 lines out of the shuffled array. These are guaranteed to be random from the shuffle operation.
You can do something like this:
input_lines = File.foreach("test.txt").map(&:to_s)
output_lines = []
37.times do
output_lines << input_lines.delete_at(rand(input_lines.length))
end
puts output_lines
This will ensure that you aren't grabbing duplicate lines and you don't need to do any fancy checking.
However, if your file is less than 37 lines this may cause a problem, it also assumes that your file exists.
EDIT:
What is happening is the rand call is now changing the range on which it is called based on the size of the input lines. And since you are deleting at an index when you take the line out, the length shrinks and you do not risk duplicating lines.
If you want to save relatively few lines from a large file, reading the entire file into an array (and then randomly selecting lines) could be costly. It might be better to count the number of lines in the file, randomly select line offsets and then save the lines at those offsets to an array. This approach is no more difficult to implement than the former one, but makes the method more robust, even if the files in the current application are not overly large.1
Suppose your filename were given by FName. Here are three ways to count the numbers of lines in the file:
Count lines, literally
cnt = File.foreach(FName).reduce(0) { |c,_| c+1 }
Use $.
File.foreach(FName) {}
cnt = $.
On Unix-family computers, shell-out to the operating system
cnt = %x{wc -l #{FName}}.split.first.to_ii
The third option is very fast.
Random offsets (base 1) for n lines to be saved could be computed as follows:
lines = (1..cnt).to_a.sample(n).sort
Saving the lines at those offsets to an array is straightforward; for example:
File.foreach(FName).with_object([]) do |line,a|
if lines.first == $.
a << line
lines.shift
break a if lines.empty?
end
end
Note that $. #=> 1 after the first line is first line is read, and $. is incremented by 1 after each successive line is read. (Hence base 1 for line offsets.)
1 Moreover, many programmers, not just Rubiests, are repelled by the idea of amassing large numbers of anything and then discarding all but a few.

Ruby regex count matched elements in the array of digits

I have a string:
'my_array1: ["1445","374","1449","378"], my_array2: ["1445","374", "1449","378"]'
I need to match all sets of digits from my_array2: [...] and count how many of them there.
I need to do something like this with regex and ruby MatchData
string = 'my_array1: ["1445","374", "1449","378"], my_array2: ["1445","374", "1449","378"]'
matches = string.match(/my_array2\:\s[\[,]\"(\d+)\"/)
count_matches = matches.size
Expected result should be 4.
What is the correct way of doing it?
If you are guaranteed that the content of my_array2 is always numeric you could simply use split twice. First you splitby my_array2: [" and then split by ,. This should give you the amount of items you are after.
If you are not guaranteed that, you could still split by my_array2 and instead of splitting again, you use a pattern such as "\d+" (or "\d+(\.\d+)? if you have floating point values) and count.
An example of the expression is available here.

Automatically increment filename VideoWriter MATLAB

I have MATLAB set to record three webcams at the same time. I want to capture and save each feed to a file and automatically increment it the file name, it will be replaced by experiment_0001.avi, followed by experiment_0002.avi, etc.
My code looks like this at the moment
set(vid1,'LoggingMode','disk');
set(vid2,'LoggingMode','disk');
avi1 = VideoWriter('X:\ABC\Data Collection\Presentations\Correct\ExperimentA_002.AVI');
avi2 = VideoWriter('X:\ABC\Data Collection\Presentations\Correct\ExperimentB_002.AVI');
set(vid1,'DiskLogger',avi1);
set(vid2,'DiskLogger',avi2);
and I am incrementing the 002 each time.
Any thoughts on how to implement this efficiently?
Thanks.
dont forget matlab has some roots to C programming language. That means things like sprintf will work
so since you are printing out an integer value zero padded to 3 spaces you would need something like this sprintf('%03d',n) then % means there is a value to print that isn't text. 0 means zero pad on the left, 3 means pad to 3 digits, d means the number itself is an integer
just use sprintf in place of a string. the s means String print formatted. so it will output a string. here is an idea of what you might do
set(vid1,'LoggingMode','disk');
set(vid2,'LoggingMode','disk');
for (n=1:2:max_num_captures)
avi1 = VideoWriter(sprintf('X:\ABC\Data Collection\Presentations\Correct\ExperimentA_%03d.AVI',n));
avi2 = VideoWriter(sprintf('X:\ABC\Data Collection\Presentations\Correct\ExperimentB_002.AVI',n));
set(vid1,'DiskLogger',avi1);
set(vid2,'DiskLogger',avi2);
end

copy the lines of a file into hashmap in ruby

I have a file with multiple lines. In each line, there two words and a number, split by a comma - for example a, b, 1. It means that string A and string B have the key as 1. I wrote the below piece of code
File.open(ARGV[0], 'r') do |f1|
while line = f1.gets
puts line
end
end
i'm looking for an idea of how to split and copy the characters and number in such a way that the first two words have the last number as key in the hashmap.
Does this work for you?
hash = {}
File.readlines(ARGV[0]).each do |line|
var = line.gsub(' ','').split(',')
hash[var[2]] = var[0],var[1]
end
This would give:
hash['1'] = ['a','b']
I don't know if you want to store number one as an integer or a string, if it's a integer you're looking for, just do var[2].to_i before storing.
Modified your code a little bit, i think it's shorter this way, if i'm in any way wrong, do let me know.

Resources