I am wondering how to make something where if X=5 and Y=2, then have it output something like
Hello 2 World 5.
In Java I would do
String a = "Hello " + Y + " World " + X;
System.out.println(a);
So how would I do that in TI-BASIC?
You have two issues to work out, concatenating strings and converting integers to a string representation.
String concatenation is very straightforward and utilizes the + operator. In your example:
"Hello " + "World"
Will yield the string "Hello World'.
Converting numbers to strings is not as easy in TI-BASIC, but a method for doing so compatible with the TI-83+/84+ series is available here. The following code and explanation are quoted from the linked page:
:"?
:For(X,1,1+log(N
:sub("0123456789",ipart(10fpart(N10^(-X)))+1,1)+Ans
:End
:sub(Ans,1,length(Ans)-1?Str1
With our number stored in N, we loop through each digit of N and store
the numeric character to our string that is at the matching position
in our substring. You access the individual digit in the number by
using iPart(10fPart(A/10^(X, and then locate where it is in the string
"0123456789". The reason you need to add 1 is so that it works with
the 0 digit.
In order to construct a string with all of the digits of the number, we first create a dummy string. This is what the "? is used
for. Each time through the For( loop, we concatenate the string from
before (which is still stored in the Ans variable) to the next numeric
character that is found in N. Using Ans allows us to not have to use
another string variable, since Ans can act like a string and it gets
updated accordingly, and Ans is also faster than a string variable.
By the time we are done with the For( loop, all of our numeric characters are put together in Ans. However, because we stored a dummy
character to the string initially, we now need to remove it, which we
do by getting the substring from the first character to the second to
last character of the string. Finally, we store the string to a more
permanent variable (in this case, Str1) for future use.
Once converted to a string, you can simply use the + operator to concatenate your string literals with the converted number strings.
You should also take a look at a similar Stack Overflow question which addresses a similar issue.
For this issue you can use the toString( function which was introduced in version 5.2.0. This function translates a number to a string which you can use to display numbers and strings together easily. It would end up like this:
Disp "Hello "+toString(Y)+" World "+toString(X)
If you know the length of "Hello" and "World," then you can simply use Output() because Disp creates a new line after every statement.
Related
I got a task on code wars.
The task is
In this simple Kata your task is to create a function that turns a string into a Mexican Wave. You will be passed a string and you must return that string in an array where an uppercase letter is a person standing up.
Rules are
The input string will always be lower case but maybe empty.
If the character in the string is whitespace then pass over it as if it was an empty seat
Example
wave("hello") => []string{"Hello", "hEllo", "heLlo", "helLo", "hellO"}
So I have found the solution but I want to understand the logic of it. Since its so minimalistic and looks cool but I don't understand what happens there. So the solution is
fun wave(str: String) = str.indices.map { str.take(it) + str.drop(it).capitalize() }.filter { it != str }
Could you please explain?
str.indices just returns the valid indices of the string. This means the numbers from 0 to and including str.length - 1 - a total of str.length numbers.
Then, these numbers are mapped (in other words, transformed) into strings. We will now refer to each of these numbers as "it", as that is what it refers to in the map lambda.
Here's how we do the transformation: we first take the first it characters of str, then combine that with the last str.length - it characters of str, but with the first of those characters capitalized. How do we get the last str.length - it characters? We drop the first it characters.
Here's an example for when str is "hello", illustrated in a table:
it
str.take(it)
str.drop(it)
str.drop(it).capitalize()
Combined
0
hello
Hello
Hello
1
h
ello
Ello
hEllo
2
he
llo
Llo
heLLo
3
hel
lo
Lo
helLo
4
hell
o
O
hellO
Lastly, the solution also filters out transformed strings that are the same as str. This is to handle Rule #2. Transformed strings can only be the same as str if the capitalised character is a whitespace (because capitalising a whitespace character doesn't change it).
Side note: capitalize is deprecated. For other ways to capitalise the first character, see Is there a shorter replacement for Kotlin's deprecated String.capitalize() function?
Here's another way you could do it:
fun wave2(str: String) = str.mapIndexed { i, c -> str.replaceRange(i, i + 1, c.uppercase()) }
.filter { it.any(Char::isUpperCase) }
The filter on the original is way more elegant IMO, this is just as an example of how else you might check for a condition. replaceRange is a way to make a copy of a string with some of the characters changed, in this case we're just replacing the one at the current index by uppercasing what's already there. Not as clever as the original, but good to know!
The following code always outputs "not":
print "input a number please. "
TestNumber = gets
if TestNumber % 2 == 0
print "The number is even"
else
print "The number is not even"
end
What is going wrong with my code?
The gets() method returns an object of type String.
When you call %() on a String object, the return value is a new String object (usually it changes the text. You can read more about string formatting here).
Since there are no String objects that == 0, the if/else will always take the same path.
If you want to use the return value of gets() like a number, you will need to transform it into one first. The simplest approach is probably to use the to_i() method on String objects, which returns a new 'Integer' object. If you're doing something where the user input will not always be an integer (e.g. 3.14 or 1.5), you might need to use a different approach.
One last thing: in your example the result of gets() is saved into a constant called TestNumber. Constants are different to normal variables, and they will probably cause problems if you're not using them intentionally. Normal variables don't start with capital letters. (You can read more about ruby variables here). In ruby you need to write you variable names like this: test_number.
I suspect your Testnumber variable might be interpreted as a string during the operation. make sure the testnum is converted to an integer first even if you put in say 100 it could be its being interpreted as the stirng "100" and not the integer 100.
A similar issue can be found here: Ruby Modulo Division
You have to convert TestNumber from string to integer, as your input has linefeed and/or other unwanted characters that do not match an integer.
Use TestNumber = gets.to_i to convert to integer before testing.
Dim str as String
str = "30 40 50 60"
I want to count the number of substrings.
Expected Output: 4
(because there are 4 total values: 30, 40, 50, 60)
How can I accomplish this in VB6?
You could try this:
arrStr = Split(str, " ")
strCnt = UBound(arrStr) + 1
msgBox strCnt
Of course, if you've got Option Explicit set (which you should..) then declare the variables above first..
Your request doesn't make any sense. A string is a sequence of text. The fact that that sequence of text contains numbers separated by spaces is quite irrelevant. Your string looks like this:
30 40 50 60
There are not 4 separate values, there is only one value, shown above—a single string.
You could also view the string as containing 11 individual characters, so it could be argued that the "count" of the string would be 11, but this doesn't get you any further towards your goal.
In order to get the result that you expect, you need to split the string into multiple strings at each space, producing 4 separate strings, each containing a 2-digit numeric value.
Of course, the real question is why you're storing this value in a string in the first place. If they're numeric values, you should store them in an array (for example, an array of Integers). Then you can easily obtain the number of elements in the array using the LBound() and UBound() functions.
I agree with everything Cody stated.
If you really wanted to you could loop through the string character by character and count the number of times you find your delimiter. In your example, it is space delimited, so you would simply count the number of spaces and add 1, but as Cody stated, those are not separate values..
Are you trying to parse text here or what? Regardless, I think what you really need to do is store your data into an array. Make your life easier, not more difficult.
Is it possible to use variables in both fields of the gsub method ?
I'm trying to get this piece of code work :
$I = 0
def random_image
$I.to_s
random = rand(1).to_s
logo = File.read('logo-standart.txt')
logo_aleatoire = logo.gsub(/#{$I}/, random)
File.open('logo-standart.txt', "w") {|file| File.puts logo_aleatoire}
$I.to_i
$I += 1
end
Thanks in advance !
filecontents = File.read('logo-standart.txt')
filecontents.gsub!(/\d+/){rand(100)}
File.open("logo-standart.txt","w"){|f| f << filecontents }
The magic line is the second line.
The gsub! function modifies the string in-place, unlike the gsub function, which would return a new string and leave the first string unmodified.
The single parameter that I passed to gsub! is the pattern to match. Here, the goal is to match any string of one or more digits -- this is the number that you're going to replace. There's no need to loop through all of the possible numbers running gsub on each one. You can even match numbers as high as a googol (or higher) without your program taking longer and longer to run.
The block that gsub! takes is evaluated each time the pattern matches to programmatically generate a replacement number. So each time, you get a different random number. This is different from the more usual form of gsub! that takes two parameters -- there the parameter is evaluated once before any pattern matching occurs, and all matches are replaced by the same string.
Note that the way this is structured, you get a new random number for each match. So if the number 307 appears twice, it turns into two different random numbers.
If you wanted to map 307 to the same random number each time, you could do the following:
filecontents = File.read('logo-standart.txt')
randomnumbers = Hash.new{|h,k| h[k]=rand(100)}
filecontents.gsub!(/\d+/){|match| randomnumbers[match]}
File.open("logo-standart.txt","w"){|f| f << filecontents }
Here, randomnumbers is a hash that lets you look up the numbers and find what random number they correspond to. The block passed when constructing the hash tells the hash what to do when it finds a number that it hasn't seen before -- in this case, generate a new random number, and remember what that random number the mapping. So gsub!'s block just asks the hash to map numbers for it, and randomnumbers takes care of generating a new random number when you encounter a new number from the original file.
I can't iterate over the entire range of unicode characters.
I searched everywhere...
I am building a fuzzer and want to embed into a url, all unicode characters (one at a time).
For example:
http://www.example.com?a=\uff1c
I know that there are some built tools but I need more flexibility.
If i could do someting like the following: "\u" + "ff1c" it would be great.
This is the closest I got:
char = "\u0000"
...
#within iteration
char.succ!
...
but after the character "\u0039", which is the number 9, I will get "10" instead of ":"
You could use pack to convert numbers to UTF8 characters but I'm not sure if this solves your problem.
You can either create an array with numeric values of all the characters and use pack to get an UTF8 string or you can just loop from 0 to whatever you need and use pack within the loop.
I've written a small example to explain myself. The code below prints out the hex value of each character followed by the character itself.
0.upto(100) do |i|
puts "%04x" % i + ": " + [i].pack("U*")
end
Here's some simpler code, albeit slightly obfuscated, that takes advantage of the fact that Ruby will convert an integer on the right hand side of the << operator to a codepoint. This only works with Ruby 1.8 up for integer values <= 255. It will work for values greater than 255 in 1.9.
0.upto(100) do |i|
puts "" << i
end