I am using Visual Studio Ultimate where came to know my all hard disk space is reducing day by day. Then got into a folder Program Data\Visual Studio\10\TraceDebugging Where it used almost 116 Gb of my space. I dont know how to get rid of it and kinda skeptical removing manually. If anybody has faced this before or know the safest way to turn off or remove this files. Please help me with that.
Thanks in Advance.
Everything I'm finding on the internet seems to say that these files are perfectly safe to delete. There was a bug in Visual Studio 2010 that was not cleaning up these files. A later service pack fixed the cleanup code.
You should install Visual Studio 2010 Service Pack 1 to correct the issue in the future. The files are safe to delete manually.
A Link to SP1:
http://www.microsoft.com/download/en/details.aspx?id=23691
Related
While updating or uninstalling Visual Studio Installer Projects Extension Preview the step "Microsoft Visual Studio Preparation" is taking enormous amount of time. I may say it gets stuck.
My suspicion is the installer (Windows one, not the extension itself, since it is getting modified--updated or uninstalled) is making changes to the registry.
VS registry entries are too many to investigate them one by one. Re-installing VS is not an option. (I have VS 2013 Ultimate on Windows 8.1.)
So, my question is: is there any tool to repair, optimize, clean, or otherwise modify registry (VS portions only) to get the process quicker? Or some sensitive keys that need to be explored? Seems like there are timeouts involved? (Although I do not find this quite reasonable...)
Or, if I am wrong about the registry, Is there another reason for this symptomatic behaviour? UAC issues? NTFS security? Other?
Any advice?
Thanks.
I just solved a similar issue with installing Visual Studio 2013 Update 3. It was taking over an hour on the "Microsoft Visual Studio Preparation" step.
I fired up Process Monitor from Sysinternals and realised the installer was busy logging to C:\FusionLog. Killed the update process, changed the relevant settings under HKLM\Software\Microsoft\Fusion to turn off assembly bind logging, rebooted to make sure the new settings were recognised, and voila, the "Microsoft Visual Studio Preparation" step took on the order of 10's of seconds.
I hope this helps with your problem because this was extremely frustrating for me. I wasted most of my work day on this.
When "Microsoft Visual Studio Preparation" is shown, the installer is running "devenv /setup" to register any packages and templates. That can take a long time. Though it's not ideal, it's not a bug; it's how Visual Studio works.
See this blog posting: http://blogs.msdn.com/b/heaths/archive/2014/01/21/upgrading-visual-studio-2013-update-to-a-newer-update-may-be-slow.aspx
It basically says there's no workaround to save time, just sit tight:
"There is no current workaround that will save time. You might consider starting the upgrade before taking a lunch or heading out for the day."
It also says the issue has been resolved for future versions of VSUpdate and Visual Studio.
Try to block the antivir activity. As for me, it significantly raised the speed.
I'm experiencing some performance problems. When I edit a file, Visual Studio 2008 performs a background (on-the-fly) compilation and then, it updates the error list. During this time, the cursor in the file editor disappears, and the keys I press to move or type more character are buffered.
Once the background compilation is finished, the changes are reflected in the editor (1 - 2 seconds). Every time I edit a file, which happens often, this happens.
How can I fix this problem? If this is not possible, can I disable this automatic build?
I had an odd performance-related issue today. My Microsoft Visual Studio seemed to be taking far too long to perform even the simplest of operations. I Googled around and tried a few ideas that people had such as disabling add-ins or clearing Visual Studio’s recent projects list but those suggestions didn’t seem to solve the problem. I remembered that the Windows SysInternals website had a tool called Process Monitor that would sniff registry and file accesses by any running program.
It seemed to me that Visual Studio was up to something and Process Monitor should help me figure out what it was. I downloaded the most recent version, and after fiddling around a bit with its display filters, ran it and to my horror, I saw that Visual Studio was so slow because it was accessing the more than 10,000 folders in C:\Users\krintoul\AppData\Local\Microsoft\WebSiteCache on most IDE operations. I’m not sure why there were that many folders and moreover, wasn’t sure what Visual Studio was doing with them, but after I zipped those folders up and moved them somewhere else, Visual Studio’s performance improved tremendously.
The Windows SysInternals website has a number of other useful utilities for network management, security, system information and more. Check it out. I’m sure you’ll find something of value.
My visual studio 2010 crashed when some carelessness [bit of madness] mistakenly pressed start button and my Acer timeline got unstable. Two projects where open at the time, one in visual studio 2005 [I have both 2005 and 2010 installed]. Unfortunately I lost all the codes I had done at the time along with those coded even weeks before. Now the project files in both the solutions are those weeks older. Amazingly, the .aspx pages are intact and .cs files are gone.
What can be done to get the lost data? Help please.
Thanks.
Guys TAKE CARE if your Visual Studio crashes, you need to check the backup BEFORE you restart Visual Studio and check if your files are ok! Many people complain that they lost work after a crash, and then they restart Visual Studio, and upon discovering that their code cannot be found in Visual Studio they then check the backup at the location
%USERPROFILE%\Documents\Visual Studio 2010\Backup Files\\
The order is important. Check the backup FIRST, before restarting Visual Studio. If you start Visual Studio and then open your old project it's probable that Visual Studio will overwrite the backup files for that project.
Securing the backup is your FIRST concern. Then start Visual Studio and open your project to see how much damage there is.
You can check:
C:\Users\<username>\Documents\Visual Studio 2010\Backup Files\<ProjectName>\
C:\Users\<username>\Documents\Visual Studio 2005\Backup Files\<ProjectName>\
More information can be found here:
Visual Studio 2010 AutoRecover Feature
I just had the same experience -- losing a source file during a BSOD. Very annoying!
No backup file could be found, and I searched the hard drive for a file containing the class name, but no backup was unturned.
However I was able to get back something resembling my code by decompiling a DLL from the bin/Debug folder using DotPeek. So if you had previously compiled your code successfully, you can get the code (without comments, and with some weird local variable names, etc) via decompilation.
I Had the same problem, I lost code due to BSOD.
the backup folder should store files not saved until they are saved whenever you save the files there are deleted.
I think that maybe they don't remain after a restart as it was empty in my case.
A very good file recovery tool is Recuva. It helped me once, didn't help me second time, though, because I noticed the data loss too late, and all recoverable data got overwritten.
So I used DotPeek, though you'll have to do a lot of work on the disassembled files, they are pretty weird.
Now I put my source tree in Google Drive, because it has file versions and keeps deleted files. Dropbox would do, too.
Git or any other VCS are not solution for this thing, because you cannot have crazy amount of meaningless commits.
Due to continuing crash problems, I'm about to uninstall and reinstall my copy of Visual Studio 2005. I know that just running the uninstaller leaves a lot of resources and settings on my machine and would like to be able to reinstall from a pristine state.
Is there any way to completely uninstall VS2k5 from my machine so that it's as if it was never there?
Visual Studio 2005 is known for not uninstalling so well (especially the Express editions). Use the technique found here to manually uninstall all of Visual Studio.
sure, it starts with 'format c:' :)
Seriously though, I've had that type of issue with various MS products. Clean uninstalls are almost impossible because even windows hasn't kept track of what shared DLLs were installed by VS2005. You could try installing VS express, hope that it overwrites whatever problem is there, and then reinstall VS2005, but I wouldn't hold my breath on it working.
The other possibility is that it's something local to your user. You could try moving your folder under documents and settings and getting it to regenerate and see if that works...
A hell of a lot of luck. I have tried many times to pull this off and each time I ended up just restoring to before I installed it or doing a fresh install.
If DevStudio is crashing a lot on you, you might try uninstalling any add-ins and extensions as a first step.
It might save you a lot of pain.
Rebuild your machine. Things just get mucked up after a while, and in the process you'll clean out all the muck you've accumulated in Windows in addition to the Visual Studio muck. It seems harsh, but after you do it a couple times it's really faster, less painful, and more complete than trying to track down a bunch of random issues.
Aaron Stebner's WebLog has a link to a specialist uninstaller for VS2005 here. More straight forward than the official MS solution of downloading MSIZap.exe and the Windows Server 2003 SDK.
I am having trouble with my Visual Studio 2005 IntelliSense for some time now.
It used to work fine, but for some reason the 'Updating IntelliSense...' does no longer seem to be able to complete for the solution I'm working on currenly- it simply gets stuck somewhere at about 3-bars of progress and blocks one of my precious CPUs for eternity.
Deleting the .ncb file of my solution and performing a full 'Clean' afterwards was no help.
The 'Update' simply gets stuck again.
The project I'm working on is a fairly large C++ solution with 50+ projects, quite a few template classes (even more lately) and in general quite complex. I have no idea which impact this might have on the IntelliSense.
Visual Studio 2005 Service Pack 1 and all hotfixes which rely on it are not
installed (we hade huge problems with this one, so we haven't migrated yet).
Any answer is very much appreciated on this one. Gives me the creeps..
Cheers,
\Bjoern
Rename "C:\Program Files\Microsoft Visual Studio 8\VC\vcpackages\feacp.dll" to something else (like "feacp.bak") to disable Intellisense.
I recommend getting Visual Assist X to make up for it (it also has a number of other useful features as well).
I have found that the best fix for Intellisense in VS2005 is to install SP1, and then this hotfix: 947315. It has the added benefit of fixing most of the multi-core build issues.
This hotfix also includes the ability to control Intellisense via Macros. More information here.
As for making SP1 more friendly for existing code, you might also check out this hotfix for template compilation: http://support.microsoft.com/kb/930198
Intellsense is problematic. Very problematic. When it works, it's great, but more often than not it will cause more problems than it's worth. It will hang up, it will parse through files while you are trying to compile code and will generally make VC 2005 sometimes run like a dog. As a previous poster suggested, disable intellisense (and chose a potential alternative -- I also support VAX).
Supposedly the hotfix and SP1 provided by MS will fix some intellisense problems, but not all. We have seen minimal help from these where I work. You are better off to disable it and rely on something else.
My feeling is that the slowness comes from the size of the projects. Yours seems like it might fall into that case.
Here is the only solution that works for me.