When I start VisualStudio it frezzes on the start screen. But when I start it a second time while the first instance is open the second instance works fine.
It's not that important but what could cause that problem?
Not sure. Sometimes some Visual Studio extensions are locking up Visual Studio.
I think by default Visual Studio tries to update these extensions
that have been installed automatically.
Recently I was trying to run Visual Studio (at Home) and it would freeze if I tried to open a specific project. But I was busy, so I didn't pursue it further and did other things. Then a week or a few days later I tried to run Visual Studio (at home), and it locked up when I ran it. I tried really hard to fix it.
There is a way I don't like where you can delete all or most of the
extensions from the place Visual Studio installs them, but this is
messy, and it is easy to get rid of something you need, and may hard
to get it back where it works correctly again. So I now recommend against this since there is a better solution now, below!
I searched to find a solution, and someone on a Microsoft board I think said to run from a command prompt as Administrator: DEVENV /RESETSETTINGS, I tried that and it didn't work for me. Then I thought, run DEVENV /? to see what I can see, and I saw :
DEVENV /SAFEMODE
So I tried that and it worked! Note: it was still being run from the Visual Studio Developer Prompt as an Administrator.
Visual Studio loaded up correctly, and I was able to look at the
installed extensions.
Eventually I noticed that they all or a lot of them were disabled (probably because of this SAFEMODE parameter), and I noticed that it the most recently updated were at the top of the list. I noticed that a lot of them had been automatically updated by Visual Studio and started Uninstalling a bunch of the more recent ones, and reverted at least one of them, then later uninstalled it. Eventually, after about 6 to 10 uninstalls, I got it to where Visual Studio would load normally, without the /SAFEMODE parameter! Cool!
So I turned off the automatic updates, so this will never happen automatically again. If I load a new extension or update and existing one manually, I should always exit Visual Studio and reload it after not doing too many updates or installing too many extensions to see if these extensions allow Visual Studio to load.
Sometimes an extension will not freeze Visual Studio, but will have errors. The ones that are the big problem are the ones which prevent Visual Studio from loading all the way and freezing it up. But with the above solution, you can eventually, cleanly, uninstall all the latest updates or new installed extensions until you finally get Visual Studio to load normally!
This workaround should be more widely known, so I am putting my solution to it here. Hopefully what I found should help someone else who is in a hurry, without having a lot of time to burn trying to get Visual Studio running again without freezing!
I use Visual Studio Community 2017, and I got this same issue on startup until I stumbled on this solution that deals with some corruption in the .suo file. Before I open Visual Studio for the day, I first delete the .suo file in my project folder, and it starts up just fine.
It's in a folder called .vs next to the .sln file. You may have to go to folder options View and check "Hidden Items" in order to find this folder. Dig down in that folder and you'll find the .suo file. Delete it. When you startup the project in Visual Studio, it will automatically create a new .suo file. So you'll have to do this every time you reopen.
We have a really big solution with more than 200 projects and thousands of files. Despite of that the solution used to load pretty quickly in Visual Studio 2010 as well as 2012. However, after copying the whole SVN repository to another location, loading and closing the solution suddenly took extreeeemly long. (I am talking about 30-60 minutes here!)
I found a solution myself and I wanted to share it here, hoping that it might save someone quite a few hours of research and staring at the "Preparing solution..." dialog.
When inspecting the devenv.exe process with Process Monitor, I found out that it is pretty busy with accessing the .svn directory. Here is what I did (and this somehow solved the problem):
Kill Visual Studio
Open Visual Studio without loading a solution
Disable AnkhSvn as Source Control plugin (Tools->Options->Source Control->Plug-in Selection->None)
Disable "Document Well 2010 Plus" (VS2010) or "Custom Document Well" (VS2012) in Productivity Power Tools (Tools->Options->Productivity Power Tools) - I read that somewhere and it might have helped as well...
Close Visual Studio
Delete the solution's *.suo file. This is located in the same folder as the solution itself. NOTE: You will lose several settings for your solution, like currently opened files, breakpoints, bookmarks, current solution configuration & platform (e.g. Debug x86) etc.
Restart Visual Studio
Load the solution - it was much faster now!
Close Visual Studio
Open Visual Studio without loading a solution
Re-enable AnkhSvn and the "Document Well"
Restart Visual Studio
Open the solution - it was still loaded in seconds!
I do not know which of these steps actually solved the problem. Probably, not all these steps are required, but I did not want to reproduce the problem to find out which steps may be omitted. :)
None of those helped me, what I did... I watch with ProcMon of sysinternals, filtering for devenv, and I saw a lot of entries of fussionlog. I had enabled fussionlog for debugging purposes some weeks before and didn't think in disabling it. I just had to disable fussionlog and the solution opened faster.
You can open the Visual Studio in the Safe Mode, and then check your plugin and source control settings after opening the project.
Safe Mode means "Starts Visual Studio, loading only the default environment and services."
How :
devenv /SafeMode
Or according to your path
"C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\devenv.exe" /SafeMode
source : https://msdn.microsoft.com/en-us/library/ms241278.aspx
In my case, the following worked without any of the intervening steps suggested:
Kill Visual Studio.
Start Visual Studio directly (i.e., not from the .sln file).
Then, from within Visual Studio, open the solution.
In my case this was all it took to make the problem solution load quite quickly, without the need for me to change any settings or delete any files.
fwiw, I realize this is a late entry, but I found that simply removing (deleting) my large number of breakpoints resolved the excessive load time and compile time.
This action reduced the size of the .suo file from 214MB to 977KB. Let VS handle the .suo file itself.
Compiling and loading now takes < 1 minute instead of 5-10 minutes for a solution with 35 projects. Visual Studio 2012 Pro, update 4.
None of the other answers worked for me. CI compile times were fine, but loading my solution in Visual Studio was taking almost two minutes. VS would then operate just fine until I closed and opened the solution the next time. Different versions of VS all showed the same problem and both safe mode and deleting the suo didn't help.
I ended up following the advice in http://geekswithblogs.net/akraus1/archive/2014/04/30/156156.aspx to use Windows Performance Recorder to instrument VS and find the problem. By looking in Windows Performance Analyzer under the "CPU Usage (Sampled)" section and adding the "Stack (Frame Tags)" column, I was able to dig into the usage of devenv.exe.
Turns out the hot path by count had Microsoft.VisualStudio.Platform.WindowManagement.ni.dll 23 calls down, and below that eventually Microsoft.VisualStudio.ServerExplorer.dll and Microsoft.VisualStudio.Data.Package.dll. That pointed me to look in Server Explorer in the UI and open the Data Connections tab. There I found hundreds of mistakenly added connections that came from the debug web.config's ConnectionString section. Removing those from web.config reduced the load of that individual project from 90+ seconds to almost instant.
I have a different cause for the slow loading of the projects.
My situation is utilizing Git and found that even switching branches was slower than it should be with project load.
Solution: Run Visual Studio as Administrator
Reason: Something with the Corporate laptop is not providing the needed Git tool access (it doesn't recognize that a git repository is in use).
I have not seen any issues with Git or my personal access to any of the project files or Git objects.
I tried the above, but it didn't solve my problem.
Here's how I got around this problem, hopefully it will work for some of you as well:
Open Visual Studio 2013 with no solution.
Create a new C# Console application and save it.
Close Visual Studio.
Reopen the Console solution created in step 2.
Close Visual Studio.
Reopen the solution that was previously hanging on the Preparing Solution dialogue. Mine opened right away, no more hanging.
Using Visual Studio 2015, I ended up creating a new solution, adding the existing projects.
Deleting the *.suo from gehho's answer helped in the past, but didn't help me in this case. There's also another .suo file in a hidden .vs folder at the root of the solution.
There are other answers here for Visual Studio 2015 Visual Studio 2015 is extremely slow
For my case it was due to TFS issue. It thinks that there are more than 5000 pending changes.
The fix is to force TFS to recheck. Go to Team Explorer -> Source Control Explorer and do "Get Latest" on the projects that have pending changes. For things that are already matching TFS, Visual Studio will actually not download anything to your PC. For things that are different with TFS, Visual Studio will let you know and ask you to reconcile the difference.
This is VS 2019 Professional.
In my case there were <import ...> entries in the project files that pointed to
paths no longer available making the loading of the solution hang indefinitely without any form of information give (Shame on Microsoft!).
I encountered this problem only recently (Mar 2021), using VS 2019. It literarily takes 30+ seconds to load the file (each).
It only effects the Layout files. I believe it could be to do with the links within the files. I have not had time to investigate them.
However, I am writing this to suggest that regardless of the cause of the problem, a simple solution is to right click on the file and open it with Notepad to get your work done.
I just had Visual Studio fail on a commit due to a merge conflict and when I was done I had about 10 files that it thought were checked in that in reality never made it to TFS.
I ended up having to compare every file I might have changed and adding a single space to the ones I did... quite tedious. I'm wondering if anyone knows of a way to tell which files have been changed in this situation?
Visual Studio will recheck all files when you change from offline mode to online.
If you don't mind losing the changes, you can also just re-checkout everything with the option to overwrite files enabled.
I've been developing a project for a while, and we have started a "documentation" folder in the Visual Studio 2008 solution so that we can keep the developer documentation (and a few other useful files) in there (it's one of Visual Studio's solution folders, rather than a project). We're also using the AnkhSVN plugin so these files get copied to Subversion.
However, every time I save any of the files, Visual Studio automatically removes it from the solution, so I have to add it back in,and then close Word again without saving.
I'd have thought this was a fairly easy problem to solve, but the past three weeks (and reading many spurious results on Google for almost every search query I can think of that might be relevant) seem to have proved me wrong.
Does anyone have any ideas how to stop this behaviour?
I don't know if this still happens with VS2013, but for VS2010 here is a detailed explanation on the cause and a work-around:
Word files disappear from "Solution Items" in VS2010
Are you sure the files are removed and not just hidden? I had a similar thing with non-code files.
Showing and Hiding Hidden Files in Visual Studio 2008
I am having some troubles opening solutions in VS2008 which are under source control by TFS.
opening solutions outside of source control works fine
opening single projects is OK
others can open these solutions
VS crashes without any notice, the logfile ends without any closing tags etc.
Anyone ran across this problem before me?
I've tried all the suggestions in here.
EDIT:
I've tried to run VS in SafeMode /ResetSkipPkgs etc. nothing helped and no error message was shown (Log and VS).
Edit2:
After trying all this I nuked my Visual Studio installation now it's working.
It may not be related at all, however, I had a similar problem once opening SourceSafe projects and the actual problem was related to the length of the directory structure.
By default, sourcesafe was getting my projects to my "My Documents / My Visual Studio" folder. This, coupled with the directory structure of the solution/project went beyond the directory length visual studio could manage and crashed. I seem to remember the crash not being particularly helpful / informative.
The solution was to ensure that all the SourceSafe working directories were setup in advance to a smaller D:\Projects type directory.