I have a NSTrackingArea to determine whether I should show a close "button" in my view. I would like to show a rollover image.
What is better,
Actually using a button ( as a subview ) instead of drawing my own thing, then adding another tracking area to the button and then showing the rollover image..
Using a second NSTrackingArea to determine when the mouse is on top of the close button so I can show the rollover image.
I personally think the second one is easier, the only thing that I would have to do extra what the button would do for me is implementing a click action.
Use whichever approach is simplest for you to implement. It is extremely unlikely that either will cause any performance problems (NSTrackingArea is already highly optimized.)
Related
I'm trying to learn auto layout so I can set up a moderately complicated display the way I want. I'm starting with a simple version. At least I thought it was simple.
I have a content view containing a NSScrollView, and a zoom slider. The scroll view is, of course, just a window into a larger 'canvas' on which the user can do things.
I'd like the scroll view to be as big as the window allows, with the slider underneath.
I've tried many things none of which work, in some cases when I resize the window smaller, the scroll view goes on up over the window's top bar, obscuring the title and the red yellow, green, dots.. this is just a grumble, I won't attempt to describe how I got it.
I'm working with Visual Format Language.
The immediate problem: I can only get the thing to work at all if I put in a hard size constraint on the scroll view.
I've got constraints like #"V:|[ScrollView]-[ZoomSlider(==35)]-| and
#"|-20#1000-[ScrollView]-|"
With these, nothing shows at all, until I put a hard size on the scroll view:
For example, #"V:[ScrollView(>=70#20)]" and #"[ScrollView(>=140#20)]" results in a little tiny scroll view (as expected) just above the slider.
Window is resizable, all right.
Is there a simple way to make the scroll view resize to occupy the most space possible when I resize the window? The only way I can think of off hand is to produce metrics for the scroll view based on window size, and use a notification to change the constraints when the window size changes. There should be something simpler!
THanks.ee
OOps. Thought I knew the answer until I started to write it.
AT least here is a partial explanation of things that were causing me problems.
You can't add constraints that position or size the Window's content view. But apparently you can mess them up by deleting them programatically. Some of my problems were solved by getting rid of
[self.myContentView setTranslatesAutoresizingMaskIntoConstraints:NO];
and
[self.myContentView removeConstraints:self.myContentView.constraints];
This left me with a lot of conflicting constraints. I fixed this be eliminating all content window constraints that I could in IB, then by marking the rest as placeholders.
I've got a ways to go before I understand how to use auto layout, but doing it in code is easier (for me) than doing it with IB
I need to implement the functionality that this library provides: XYOrigami. The main issue, is I must implement it to fold on the center view when the left view is revealed rather fold the side views. Unfortunately, this has become quite a task (and I'm currently looking at manipulating the library below to do so). The left tray should be just a tray with a width of 100 to 200. When it comes out, the center view should have a cringle origami effect and fold until the tray is hidden again. Is anyone aware of a library that does this or a way to accomplish this effect.
I think you will get the sample code in mpospese / EnterTheMatrix
repository.
Just have a look at the second last tab,"The Fold Animation" & then click view.
I think this view can be taken as the center view for your case & XYOrigami as the side menu.
You many need to tweak the EnterTheMatrix to fold-unfold horizontally unlikely as it fold-unfold vertically by default.
I hope you can make a new custom component hybridized from the above two Custom controls.
Happy Coding.
Hope that Helps.
If I subclass QLabel and I add a QLabel directly to my QDialog, it works fine. If I add this label inside a ScrollArea, the thing I’m drawing doesn’t show unless I resize the dialog itself. Yes, weird.
I’ve setup compilable example code that indicates what the problem is. What I am trying to do is to select an area of an image with my mouse, by drawing a rectangle on the corresponding area. The images my program is designed to work with can be very large, and thus, I need to have a scroll area so as the dialog to stay at a logical dimension, and not to fill the entire screen (or even multiple workspaces, if we are talking about a linux machine with multiple desktops).
Everything works fine, except that the drawing (selection-rectangle) isn’t visible unless the dialog is resized – manually. I think I have to update something while drawing, but I’m not sure what. Well, here’s the example code: http://paste.ubuntu.com/1151553/
Another issues that I don’t know how to solve (and I want your suggestions there) are (1) when the user is selecting an area, how to set it to automatically scroll when the user actually selects an area by pushing against to a wall of the scroll area (I guess I am understandable here). (2) is there a way to let the user select a rectangle and then, when he left-clicks on a position with holding down the [Shift] button, the bottom right edge of his previous selection to actually go through the point he clicks at?
The documentation indicates that you have to set a Layout somehow somewhere, but I'm not sure how to do this to my occassion.
Thanks in advance for any help.
about problem (1):
just use of Event. i think mouse Enter Event or Leave Event is good for that.
and to do that i think you can use a hidden rectangular that fill the whole of the screen.
and over write the mouse leave Event for that rectangular and tell in that function , to scroll the page.
I've been struggling for weeks trying to crack this nut so I'm not sure if it's impossible, or if it's my lack of coding chops... or both. I'm not a programmer and I'm a newbie to Dojo Toolkit.
I have a site using the BorderContainer layout. I'm trying to create an effect where I can use a button to open and close a dropdown type box that will contain controls. I need this dropdown to be hidden on page load, and then open when you click the button.
My problem is that when I open the dropdown, it pushes the content pane below it off the bottom of the browser window. I need the lower ContentPane to stay fit within the remaining space of the browser window when the dropdown opens. Additionally, I want the dropdown to sit outside of the scrollable container for the content below it, which is why I have it set up to sit outside a nested BorderContainer below it.
I've created a simplified version of the code to demonstrate my challenge (see link below). If you load the page you can see the center ContentPane scrolls the content. But, if you then click on the button, a dropdown div expands above the content. Then when you scroll, you'll notice that you can't see the full pane because it's in no-man's-land below the bottom of the browser window. I assume that because the div is set to display:none on load, it's size is not accounted for on page load. Then, when you open it by pressing the button, it's size is additive and the pane below doesn't know how to resize or account for the new element.
I've tried using the visibility attribute, but that leaves a gap for the div when it's still closed. I've tinkered with some code that controls the height that shows promise, but each of my dropdown boxes will be different sizes so I'd prefer that the height be set to "auto" rather than a specified pixel size.
Does anyone have any idea how I can accomplish this so that the lower pane will fit in the space without pushing off the screen?
Here's a sample of the page:
http://equium.com/scaffold.html
(I had some problems trying to insert the full HTML page here as a code sample so if that's a preferable way to handle it, and someone can let me know the best way to embed all of that code, I'd appreciate it.)
Thanks is advance, I'd really apprecaite anyone's feedback.
You might want to take a look at dojox.layout.ExpandoPane (though be warned I think it has only worked properly for top and left regions for a while).
Also, I'd suggest simplifying/altering your layout a bit. See example here:
http://jsfiddle.net/taFzv/
(It'd probably need some tweaking to get exactly what you want.)
The real issue you're having is probably that the BorderContainer has no idea that parts of the view resized. ExpandoPane takes care of that by telling the BorderContainer to re-layout after its animation completes.
It works under IE8.0. When dropdown box open, just keep pressing mouse from page and drag to bottom, you could see the content was pushed to out of page. It looks the browser could not detect it and could not add it to "scroll bar" account.
I would suggest taking out all BorderContainers except your top level one, the one with mainPage as the id.
Place your {stuff here} div into the mainPage BorderContainer, after the ContentPane with the Close/Open button. Make sure you make it dojotype dijit.layout.ContentPane, set up layoutpriority, and set region to top. Set the height to 0/x when clicking the Open/Close button, instead of setting display.
Try your page again. If that doesn't fix it, you probably need, a call to layout, resize, or both to indicate to the BorderContainer that it needs to evaluate all its children and size the "center" pane properly. Something like dijit.byId("mainPage").layout(); Do this any time someone presses the Close/Open button, after you have changed the height of any BorderContainer children.
Maybe the dijit.form.DropDownButton would fit your needs. When click the button a tooltip is displayed that can be filled with any content you want. Just as you specified, the dropdown tooltip is only displayed when you click the button, and it doesn't mess with the underlying layout at all. The tooltip sits "on top" of the page.
If you tap on the left hand side of the screen in Outlook then an event is triggered (in this case a checkbox appears).
I would like to know the xaml on how this is achieved. It cannot be a simple "MouseLeftButtonUp" event because if you drag your finger more than a few pixels then the event does not trigger.
In my own app I am trying to get an icon appear within a listbox that has a SelectionChanged event. The issue is that if you do not touch the small icon precisely then you are triggering the listbox event rather than the event I want to occur when pressing the image.
I think I need to wrap my image in a Canvas but then am still stuck as to what the event should be.
How do you increase the target size of the area where a user can click on your element?
What event should an image have when within a listbox (which is within a pivot) that has a SelectionChanged event? (MouseLeftButtonUp causes issues if you half drag to the next pivot and lift your finger - it triggers the MouseLeftButtonUp event)
I implemented something very similar to that behavior by making an itemtemplate where the checkbox was pushed offscreen to the left by using a negative margin.
I then created 2 visual states, one for Open and Closed. The open state set the margin to 0, bringing the checkbox back onscreen. Closed state had the negative margin.
With the fluidmove behavior, switching between states on button press was EASY. The only thing you'd have to add would be an invisible button/touch area on the left that would also trigger "opening" the checkbox column (changing state to reset the margins).
Hope that helps...
The outlook app is a native app, so it probably isn't using xaml at all.
If you're worried about the mouse events, then you should look at the gesture stuff in the silverlight toolkit, it contains tap, etc events that make a little more sense on the phone.
Increasing the target size and generally making stuff touchable: wrap it in a Button, then alter the ControlTemplate for the Button to remove the border.
If you look at the ControlTemplate for a Button, (Expression Blend, Edit Template, Edit a copy) you'll see the mechanics of the touch area. It's nothing more than padding/margin.
Thus, you can't bleed your touch region out without altering the layout and affecting other items around the control. I'd do two things:
First, I'd think about whether my whole control should be larger in the first place with good spacing around it. Is my design right?
Second, I'd cheat. I'd float a fixed sized button with no border over the area using the Translate transformation to move it around freely.
Good luck,
Luke