How would I go about reading all lines between two specific lines?
Lets say line 23 is where I want to start, and line 56 is the last line to read, but it is not the end of the file.
How would I go about reading lines 23 thru 56? I will be outputting them to another file.
By row number like that is quite easy with awk:
awk 'NR >= 23 && NR <= 56'
And either way, sed makes it fun.
sed '23,56!d'
Or for a pattern,
sed '/start/,/end/!d'
I would go for sed, but a head/tail combination is possible as well:
head -n 56 file | tail -n $((56-23))
Well - I'm pretty sure there is an off-by-one-error inside. I'm going to find it. :)
Update:
Haha - know your errors, I found it:
head -n 56 file | tail -n $((56-23+1))
Sed can do that:
$ sed -n 23,56p yourfile
EDIT: as commenters pointed out making sed stop processing after the last line of the interval will make sed perform as fast as head-tail combination. So the most optimal way of getting the lines would be
$ sed -n '23,56p;57q' yourfile
But performance will greatly depend on the file you're processing, the interval and lots of other factors. So in case you're developing some script to be run frequently on known data testing all three methods mentioned in answers (sed, awk, head-tail) would be a good idea.
use sed. This should do it.
sed -n '23,56p' > out.txt
This might work for you:
sed '1,22d;56q' file
or this:
sed '23,56!d;56q' file
or this:
awk 'NR>56{exit};NR==23,NR==56' file
Related
I am trying to extract "first 12 of last 24 character" from a line, i.e.,
for a line:
species,subl,cmp= 1 4 1 s1,torque= 0.41207E-09-0.45586E-13
I need to extract "0.41207E-0".
(I have not written the code, so don't curse me for its formatting. )
I have managed to do this via:
var_s=`grep "species,subl,cmp= $3 $4 $5" $tfile |sed -n '$s/.*\(........................\)$/\1/p'|sed -n '$s/\(............\).*$/\1/p'`
but, is there any more readable way of doing this, rather then counting dots?
EDIT
Thanks to both of you;
so, I have sed,awk grep and bash.
I will run that in loop, for 100's of file.
so, can you also suggest me which one is most efficient, wrt time?
One way with GNU sed (without counting dots):
$ sed -r 's/.*(.{11}).{12}/\1/' file
0.41207E-09
Similarly with GNU grep:
$ grep -Po '.{11}(?=.{12}$)' file
0.41207E-09
Perhaps a python solution may also be helpful:
python -c 'import sys;print "\n".join([a[-24:-13] for a in sys.stdin])' < file
0.41207E-09
I'm not sure your example data and question match up so just change the values in the {n} quantifier accordingly.
Simplest is using pure bash:
echo "${str:(-24):12}"
OR awk can also do that:
awk '{print substr($0, length($0)-23, 12)}' <<< $str
OUTPUT:
0.41207E-09
EDIT: For using bash solution on a file:
while read l; do echo "${l:(-24):12}"; done < file
Another one, less efficient but has the advantage of making you discover new tools
`echo "$str" | rev | cut -b 1-24 | rev | cut -b 1-12
You can use awk to get first 12 characters of last 24 characters from a line:
awk '{substr($0,(length($0)-23))};{print substr($0,(length($0)-10))}' myfile.txt
Is it possible, in UNIX, to print a particular line of a file? For example I would like to print line 10 of file example.c. I tried with cat, ls, awk but apparently either these don't have the feature or I'm not able to properly read the man :-).
Using awk:
awk 'NR==10' file
Using sed:
sed '10!d' file
sed -n '10{p;q;}' example.c
will print the tenth line of example.c for you.
Try head and tail, you can specify the amount of lines and where to start.
To get the third line:
head -n 3 yourfile.c | tail -n 1
head -n 10 /tmp/asdf | tail -n 1
Unfortunately, all other solutions which use head/tail will NOT work incorrectly if line number provided is larger than total number of lines in our file.
This will print line number N or nothing if N is beyond total number of lines:
grep "" file | grep "^20:"
If you want to cut line number from output, pipe it through sed:
grep "" file | grep "^20:" | sed 's/^20://'
Try this:
cat -n <yourfile> | grep ^[[:space:]]*<NUMBER>[[:space:]].*$
cat -n numbers the file
the regex of grep searches the line numbered ;-)
The original mismatched as mentioned in the comments.
Te current one looks for the exact match.
- i.e. in the particular cas we need a line starting with an arbitrary amount () of spaces the followed by a space followed by whatever (.)
In case anyone thumbles over this regex and doesn't get it at all - here is a good tutorial to get you started: http://regex.learncodethehardway.org/book/ (it uses python regex as an example tough).
This might work for you:
sed '10q;d' file
How do I read the first line of a file using cat?
You don't need cat.
head -1 file
will work fine.
You don't, use head instead.
head -n 1 file.txt
There are many different ways:
sed -n 1p file
head -n 1 file
awk 'NR==1' file
You could use cat file.txt | head -1, but it would probably be better to use head directly, as in head -1 file.txt.
This may not be possible with cat. Is there a reason you have to use cat?
If you simply need to do it with a bash command, this should work for you:
head -n 1 file.txt
cat alone may not be possible, but if you don't want to use head this works:
cat <file> | awk 'NR == 1'
I'm surprised that this question has been around as long as it has, and nobody has provided the pre-mapfile built-in approach yet.
IFS= read -r first_line <file
...puts the first line of the file in the variable expanded by "$first_line", easy as that.
Moreover, because read is built into bash and this usage requires no subshell, it's significantly more efficient than approaches involving subprocesses such as head or awk.
You dont need any external command if you have bash v4+
< file.txt mapfile -n1 && echo ${MAPFILE[0]}
or if you really want cat
cat file.txt | mapfile -n1 && echo ${MAPFILE[0]}
:)
Use the below command to get the first row from a CSV file or any file formats.
head -1 FileName.csv
There is plenty of good answer to this question. Just gonna drop another one into the basket if you wish to do it with lolcat
lolcat FileName.csv | head -n 1
Adding one more obnoxious alternative to the list:
perl -pe'$.<=1||last' file
# or
perl -pe'$.<=1||last' < file
# or
cat file | perl -pe'$.<=1||last'
Say I have a file with any number of lines, say, 125. I want to get all the lines except the first n, say, 20. So, I want lines 21–125.
Is there a way to do this with with tail/head, or some other tool?
Try
tail -n +21 myfile.txt
Try
sed -i 1,20d filename
if you want to delete the first 20 lines !
Awk power can be used too:
awk -- 'NR > 20' /etc/passwd
I'm rusty with this but something like:
tail -n +20 filename
I need to repeatedly remove the first line from a huge text file using a bash script.
Right now I am using sed -i -e "1d" $FILE - but it takes around a minute to do the deletion.
Is there a more efficient way to accomplish this?
Try tail:
tail -n +2 "$FILE"
-n x: Just print the last x lines. tail -n 5 would give you the last 5 lines of the input. The + sign kind of inverts the argument and make tail print anything but the first x-1 lines. tail -n +1 would print the whole file, tail -n +2 everything but the first line, etc.
GNU tail is much faster than sed. tail is also available on BSD and the -n +2 flag is consistent across both tools. Check the FreeBSD or OS X man pages for more.
The BSD version can be much slower than sed, though. I wonder how they managed that; tail should just read a file line by line while sed does pretty complex operations involving interpreting a script, applying regular expressions and the like.
Note: You may be tempted to use
# THIS WILL GIVE YOU AN EMPTY FILE!
tail -n +2 "$FILE" > "$FILE"
but this will give you an empty file. The reason is that the redirection (>) happens before tail is invoked by the shell:
Shell truncates file $FILE
Shell creates a new process for tail
Shell redirects stdout of the tail process to $FILE
tail reads from the now empty $FILE
If you want to remove the first line inside the file, you should use:
tail -n +2 "$FILE" > "$FILE.tmp" && mv "$FILE.tmp" "$FILE"
The && will make sure that the file doesn't get overwritten when there is a problem.
You can use -i to update the file without using '>' operator. The following command will delete the first line from the file and save it to the file (uses a temp file behind the scenes).
sed -i '1d' filename
For those who are on SunOS which is non-GNU, the following code will help:
sed '1d' test.dat > tmp.dat
You can easily do this with:
cat filename | sed 1d > filename_without_first_line
on the command line; or to remove the first line of a file permanently, use the in-place mode of sed with the -i flag:
sed -i 1d <filename>
No, that's about as efficient as you're going to get. You could write a C program which could do the job a little faster (less startup time and processing arguments) but it will probably tend towards the same speed as sed as files get large (and I assume they're large if it's taking a minute).
But your question suffers from the same problem as so many others in that it pre-supposes the solution. If you were to tell us in detail what you're trying to do rather then how, we may be able to suggest a better option.
For example, if this is a file A that some other program B processes, one solution would be to not strip off the first line, but modify program B to process it differently.
Let's say all your programs append to this file A and program B currently reads and processes the first line before deleting it.
You could re-engineer program B so that it didn't try to delete the first line but maintains a persistent (probably file-based) offset into the file A so that, next time it runs, it could seek to that offset, process the line there, and update the offset.
Then, at a quiet time (midnight?), it could do special processing of file A to delete all lines currently processed and set the offset back to 0.
It will certainly be faster for a program to open and seek a file rather than open and rewrite. This discussion assumes you have control over program B, of course. I don't know if that's the case but there may be other possible solutions if you provide further information.
The sponge util avoids the need for juggling a temp file:
tail -n +2 "$FILE" | sponge "$FILE"
If you want to modify the file in place, you could always use the original ed instead of its streaming successor sed:
ed "$FILE" <<<$'1d\nwq\n'
The ed command was the original UNIX text editor, before there were even full-screen terminals, much less graphical workstations. The ex editor, best known as what you're using when typing at the colon prompt in vi, is an extended version of ed, so many of the same commands work. While ed is meant to be used interactively, it can also be used in batch mode by sending a string of commands to it, which is what this solution does.
The sequence <<<$'1d\nwq\n' takes advantage of modern shells' support for here-strings (<<<) and ANSI quotes ($'...') to feed input to the ed command consisting of two lines: 1d, which deletes line 1, and then wq, which writes the file back out to disk and then quits the editing session.
As Pax said, you probably aren't going to get any faster than this. The reason is that there are almost no filesystems that support truncating from the beginning of the file so this is going to be an O(n) operation where n is the size of the file. What you can do much faster though is overwrite the first line with the same number of bytes (maybe with spaces or a comment) which might work for you depending on exactly what you are trying to do (what is that by the way?).
You can edit the files in place: Just use perl's -i flag, like this:
perl -ni -e 'print unless $. == 1' filename.txt
This makes the first line disappear, as you ask. Perl will need to read and copy the entire file, but it arranges for the output to be saved under the name of the original file.
should show the lines except the first line :
cat textfile.txt | tail -n +2
Could use vim to do this:
vim -u NONE +'1d' +'wq!' /tmp/test.txt
This should be faster, since vim won't read whole file when process.
How about using csplit?
man csplit
csplit -k file 1 '{1}'
This one liner will do:
echo "$(tail -n +2 "$FILE")" > "$FILE"
It works, since tail is executed prior to echo and then the file is unlocked, hence no need for a temp file.
Since it sounds like I can't speed up the deletion, I think a good approach might be to process the file in batches like this:
While file1 not empty
file2 = head -n1000 file1
process file2
sed -i -e "1000d" file1
end
The drawback of this is that if the program gets killed in the middle (or if there's some bad sql in there - causing the "process" part to die or lock-up), there will be lines that are either skipped, or processed twice.
(file1 contains lines of sql code)
tail +2 path/to/your/file
works for me, no need to specify the -n flag. For reasons, see Aaron's answer.
You can use the sed command to delete arbitrary lines by line number
# create multi line txt file
echo """1. first
2. second
3. third""" > file.txt
deleting lines and printing to stdout
$ sed '1d' file.txt
2. second
3. third
$ sed '2d' file.txt
1. first
3. third
$ sed '3d' file.txt
1. first
2. second
# delete multi lines
$ sed '1,2d' file.txt
3. third
# delete the last line
sed '$d' file.txt
1. first
2. second
use the -i option to edit the file in-place
$ cat file.txt
1. first
2. second
3. third
$ sed -i '1d' file.txt
$cat file.txt
2. second
3. third
If what you are looking to do is recover after failure, you could just build up a file that has what you've done so far.
if [[ -f $tmpf ]] ; then
rm -f $tmpf
fi
cat $srcf |
while read line ; do
# process line
echo "$line" >> $tmpf
done
Based on 3 other answers, I came up with this syntax that works perfectly in my Mac OSx bash shell:
line=$(head -n1 list.txt && echo "$(tail -n +2 list.txt)" > list.txt)
Test case:
~> printf "Line #%2d\n" {1..3} > list.txt
~> cat list.txt
Line # 1
Line # 2
Line # 3
~> line=$(head -n1 list.txt && echo "$(tail -n +2 list.txt)" > list.txt)
~> echo $line
Line # 1
~> cat list.txt
Line # 2
Line # 3
Would using tail on N-1 lines and directing that into a file, followed by removing the old file, and renaming the new file to the old name do the job?
If i were doing this programatically, i would read through the file, and remember the file offset, after reading each line, so i could seek back to that position to read the file with one less line in it.