Is it possible, in UNIX, to print a particular line of a file? For example I would like to print line 10 of file example.c. I tried with cat, ls, awk but apparently either these don't have the feature or I'm not able to properly read the man :-).
Using awk:
awk 'NR==10' file
Using sed:
sed '10!d' file
sed -n '10{p;q;}' example.c
will print the tenth line of example.c for you.
Try head and tail, you can specify the amount of lines and where to start.
To get the third line:
head -n 3 yourfile.c | tail -n 1
head -n 10 /tmp/asdf | tail -n 1
Unfortunately, all other solutions which use head/tail will NOT work incorrectly if line number provided is larger than total number of lines in our file.
This will print line number N or nothing if N is beyond total number of lines:
grep "" file | grep "^20:"
If you want to cut line number from output, pipe it through sed:
grep "" file | grep "^20:" | sed 's/^20://'
Try this:
cat -n <yourfile> | grep ^[[:space:]]*<NUMBER>[[:space:]].*$
cat -n numbers the file
the regex of grep searches the line numbered ;-)
The original mismatched as mentioned in the comments.
Te current one looks for the exact match.
- i.e. in the particular cas we need a line starting with an arbitrary amount () of spaces the followed by a space followed by whatever (.)
In case anyone thumbles over this regex and doesn't get it at all - here is a good tutorial to get you started: http://regex.learncodethehardway.org/book/ (it uses python regex as an example tough).
This might work for you:
sed '10q;d' file
Related
So I have a string at the beginning of a line and can find all of them. I am using ^$string to match and I have thousands of these and an error occurs on a specific line. Let's say I was trying to get to the 100th occurrence of this pattern how would I do so?
For example, I can grep ^$string and list all but I would like to find a specific one.
grep has -m / --max-count option:
grep -m100 '^String' | tail -1
will give you the 100th matched line.
Note:
the -m100 will make grep stop reading the input file if 100 matches are hit. It's pretty useful if you are reading a huge file
the tail command is very fast since it doesn't read the content.
You can use sed to print only a single line of your grep's output :
grep "^$string" inputFile | sed -n '100p'
-n has output disabled by default, 100p prints the input to the output stream for the 100th line only.
Or as #dan mentions in the comments :
grep "^$string" inputFile | sed '100!d;q'
Do you have any bash solution to remove N lines from stdout?
like a 'head' command, print all lines, only except last N
Simple solition on bash:
find ./test_dir/ | sed '$d' | sed '$d' | sed '$d' | ...
but i need to copy sed command N times
Any better solution?
except awk, python etc...
Use head with a negative number. In my example it will print all lines but last 3:
head -n -3 infile
if head -n -3 filename doesn't work on your system (like mine), you could also try the following approach (and maybe alias it or create a function in your .bashrc)
head -`echo "$(wc -l filename)" | awk '{ print $1 - 3; }'` filename
Where filename and 3 above are your file and number of lines respectively.
The tail command can skip from the end of a file on Mac OS / BSD. tail accepts +/- prefix, which facilitates expression below, which will show 3 lines from the start
tail -n +3 filename.ext
Or, to skip lines from the end of file, use - prefixed, instead.
tail -n -3 filenme.ext
Typically, the default for tail is the - prefix, thus counting from the end of the file. See a similar answer to a different question here: Print a file skipping first X lines in Bash
I have very long log files, is it possible to ask grep to only search the first 10 lines?
The magic of pipes;
head -10 log.txt | grep <whatever>
For folks who find this on Google, I needed to search the first n lines of multiple files, but to only print the matching filenames. I used
gawk 'FNR>10 {nextfile} /pattern/ { print FILENAME ; nextfile }' filenames
The FNR..nextfile stops processing a file once 10 lines have been seen. The //..{} prints the filename and moves on whenever the first match in a given file shows up. To quote the filenames for the benefit of other programs, use
gawk 'FNR>10 {nextfile} /pattern/ { print "\"" FILENAME "\"" ; nextfile }' filenames
Or use awk for a single process without |:
awk '/your_regexp/ && NR < 11' INPUTFILE
On each line, if your_regexp matches, and the number of records (lines) is less than 11, it executes the default action (which is printing the input line).
Or use sed:
sed -n '/your_regexp/p;10q' INPUTFILE
Checks your regexp and prints the line (-n means don't print the input, which is otherwise the default), and quits right after the 10th line.
You have a few options using programs along with grep. The simplest in my opinion is to use head:
head -n10 filename | grep ...
head will output the first 10 lines (using the -n option), and then you can pipe that output to grep.
grep "pattern" <(head -n 10 filename)
head -10 log.txt | grep -A 2 -B 2 pattern_to_search
-A 2: print two lines before the pattern.
-B 2: print two lines after the pattern.
head -10 log.txt # read the first 10 lines of the file.
You can use the following line:
head -n 10 /path/to/file | grep [...]
The output of head -10 file can be piped to grep in order to accomplish this:
head -10 file | grep …
Using Perl:
perl -ne 'last if $. > 10; print if /pattern/' file
An extension to Joachim Isaksson's answer: Quite often I need something from the middle of a long file, e.g. lines 5001 to 5020, in which case you can combine head with tail:
head -5020 file.txt | tail -20 | grep x
This gets the first 5020 lines, then shows only the last 20 of those, then pipes everything to grep.
(Edited: fencepost error in my example numbers, added pipe to grep)
grep -A 10 <Pattern>
This is to grab the pattern and the next 10 lines after the pattern. This would work well only for a known pattern, if you don't have a known pattern use the "head" suggestions.
grep -m6 "string" cov.txt
This searches only the first 6 lines for string
I want to get the second last line from the ls -l output.
I know that
ls -l|tail -n 2| head -n 1
can do this, just wondering if sed can do this in just one command?
ls -l|sed -n 'x;$p'
It can't do third to last though, because sed only has 1 hold space, so can only remember one older line. And since it processes the lines one at a time, it does not know the line will be next to last when processing it. awk could return thrid to last, because you can have arbitrary number of variables there, but the script would be much longer than the tail -n X|head -n 1.
In a awk one-liner :
echo -e "aaa\nbbb\nccc\nddd" | awk '{v[c++]=$0}END{print v[c-2]}'
ccc
Try this to delete second-last line in file
sed -e '$!{h;d;}' -e x filename
tac filename | sed -n 2p
-- but involves a pipe, too
[Editorial insertion: Possible duplicate of the same poster's earlier question?]
Hi, I need to extract from the file:
first
second
third
using the grep command, the following line:
second
third
How should the grep command look like?
Instead of grep, you can use pcregrep which supports multiline patterns
pcregrep -M 'second\nthird' file
-M allows the pattern to match more than one line.
Your question abstract "bash grep newline", implies that you would want to match on the second\nthird sequence of characters - i.e. something containing newline within it.
Since the grep works on "lines" and these two are different lines, you would not be able to match it this way.
So, I'd split it into several tasks:
you match the line that contains "second" and output the line that has matched and the subsequent line:
grep -A 1 "second" testfile
you translate every other newline into the sequence that is guaranteed not to occur in the input. I think the simplest way to do that would be using perl:
perl -npe '$x=1-$x; s/\n/##UnUsedSequence##/ if $x;'
you do a grep on these lines, this time searching for string ##UnUsedSequence##third:
grep "##UnUsedSequence##third"
you unwrap the unused sequences back into the newlines, sed might be the simplest:
sed -e 's/##UnUsedSequence##/\n'
So the resulting pipe command to do what you want would look like:
grep -A 1 "second" testfile | perl -npe '$x=1-$x; s/\n/##UnUsedSequence##/ if $x;' | grep "##UnUsedSequence##third" | sed -e 's/##UnUsedSequence##/\n/'
Not the most elegant by far, but should work. I'm curious to know of better approaches, though - there should be some.
I don't think grep is the way to go on this.
If you just want to strip the first line from any file (to generalize your question), I would use sed instead.
sed '1d' INPUT_FILE_NAME
This will send the contents of the file to standard output with the first line deleted.
Then you can redirect the standard output to another file to capture the results.
sed '1d' INPUT_FILE_NAME > OUTPUT_FILE_NAME
That should do it.
If you have to use grep and just don't want to display the line with first on it, then try this:
grep -v first INPUT_FILE_NAME
By passing the -v switch, you are telling grep to show you everything but the expression that you are passing. In effect show me everything but the line(s) with first in them.
However, the downside is that a file with multiple first's in it will not show those other lines either and may not be the behavior that you are expecting.
To shunt the results into a new file, try this:
grep -v first INPUT_FILE_NAME > OUTPUT_FILE_NAME
Hope this helps.
I don't really understand what do you want to match. I would not use grep, but one of the following:
tail -2 file # to get last two lines
head -n +2 file # to get all but first line
sed -e '2,3p;d' file # to get lines from second to third
(not sure how standard it is, it works in GNU tools for sure)
So you just don't want the line containing "first"? -v inverts the grep results.
$ echo -e "first\nsecond\nthird\n" | grep -v first
second
third
Line? Or lines?
Try
grep -E -e '(second|third)' filename
Edit: grep is line oriented. you're going to have to use either Perl, sed or awk to perform the pattern match across lines.
BTW -E tell grep that the regexp is extended RE.
grep -A1 "second" | grep -B1 "third" works nicely, and if you have multiple matches it will even get rid of the original -- match delimiter
grep -E '(second|third)' /path/to/file
egrep -w 'second|third' /path/to/file
you could use
$ grep -1 third filename
this will print a string with match and one string before and after. Since "third" is in the last string you get last two strings.
I like notnoop's answer, but building on AndrewY's answer (which is better for those without pcregrep, but way too complicated), you can just do:
RESULT=`grep -A1 -s -m1 '^\s*second\s*$' file | grep -s -B1 -m1 '^\s*third\s*$'`
grep -v '^first' filename
Where the -v flag inverts the match.