I've 'successfully' installed Umbraco v5 via Webmatrix - running the site - ie hitting http://localhost/install returns the following error:
Server Error in '/' Application.
Could not find a part of the path 'C:...\Umbraco CMS 5\bin\'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:...\Umbraco CMS 5\bin\'.
Any ideas? I've installed 4.x with no problems, but 5 is causing headaches...
EDIT: should add, I'm on Win7 at work, have installed successfully at home on Vista, using WebMatrix. Starting to get frustrating, since it's a top piece of gear and I'm keen to get moving with it...
Every problem I have ever had w/regards to getting Umbraco running after install was always caused by permissions not being set correctly. Try granting 'EVERYONE' full read/write/modify access to the install directory and see if it helps.
Related
i am stuck with a problem regarding Crystal Report 13. I am working on Visual Studio 2013 developing Web Application.
Previously i've developed reports and those were working fine but after some time on web page crystal report viewer stop rendering. I tried to resolve the issue by suggestions on different forums where i need to add reference of Crystal Report 13 files in my Web.Config. After all changes the problem was not resolved. Than people suggested me to re-install redistribution package of crystal report 13, i've done the same thing now there is a new problem which is quite different. Whenever i am trying to open page it shows following error:
Server Error in '/Abcd' Application.
The document has not been opened.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The document has not been opened.
I've tried many forums and different suggestions but all seems useless, i've check the appropriate rights even try after giving full rights but still at same position.
I've found the alternative solution, before i was using 13.0.21 redistribution package which was using registry dlls version 13.0.2000.0, i was facing two problems using that particular version.
1. Unable to edit rpt file, whenever i tried to open it an error appear on screen that The operations is failed or unable to complete operation (something like that i don't know exactly what the error is but the summary is this)
2. When i try to open Crystal report viewer during execution, i've come up with error which i posted earlier.
What i have done for the resolution, that i've download Crystal report developer version 13.0.21 and install it with "Run as Administrator" because i creates some entries in your registry of windows, keep in your mind to close VS during installation. After successful installation both problems are solved but u need to change the dlls version in your code from 13.0.2000.0 to 13.0.3500.0
I'm having an issue with a Joomla site, It was recently upgraded to Joomla 3.0 but now the home page hows the error "undefined method Joomla\Registry\Registry::getValue()", the only issue is it does not tell me which files are throwing this error.
I have run a file search in cPanel and a grep at command line to find any files with "getValue" in them but all responses are 0. I've even checked the database, just in case a previous developer put it in there but I have nothing.
I've searched the web, checked error logs, disabled plugins and pretty much bashed my skull against the wall for the last week to no avail.
Can anyone help?
I working on the updated site here: http://dev.hershmanlegal.com/
In the backend of your Joomla site, try going to System > Global Configuration > Server, change the error reporting to Maximum and see if you get more details about the source of the problem.
If still no joy, check your server error logs.
Good luck!
When I tried to use an Ajax control toolkit, I get a grey out error and searching around they said installing VS10 Service pack could help to solve the problem. So I did install it and now I got a serious problem:
I can no longer load the website that I can load normally before, it shows this error:
Server Error. 500 - Internal server error.
I tried many ways and finally found this one looks quite close to what happened to me:
http://support.microsoft.com/kb/842329
And I tried what it suggested:
go to C:\Windows\system32\mcfc42.dll-> properties\security\Edit\Add
Added:
Iwam_computername or computername\Iwam_computername
Also added:
Everyone
Allow Full control to all.
Restart server. But still the same problem. Please help me to fix this problem, unfortunately my server did not install backup option before I install VS SP1 so I could not recover to the previous point. Any solution ? If I cannot access it, no way I can code and test my website...
I found the solution for this. At first, to narrow down the problem I load the website at server side (not at client side) then I see this error lines in my web.config file, I think when I click at property at project in VS and choose .net 4.0 then back to 3.5 it add some duplicate to my web.config file. I just add all the first lines related to .net 3.5 and keep the xml format correct then it works fine now! Many thanks !!
I just installed Dundas dashboard 4.0.2 and it installed successfully. However when I try to open the program, the webpage shows me error:
Server Error in '/' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0009: Metadata file 'c:\Windows\Microsoft.NET\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll' could not be opened -- 'An attempt was made to load a program with an incorrect format. '
Source Error:
{No relevant source lines]
Source File: Line: 0
Looks identical to the error message in the following link:
http://www.telerik.com/community/forums/silverlight/vs-extensions/silverlight-demo-error.aspx
Based on that, it would seem like some prerequisite was not installed. Please post if the solution proposed there resolves your issue.
Hi i had the same problem not to long ago. I resolved it by uninstalling the latest release of Microsoft Silverlight and installing version 4 of it. Solved my problem instantly. There does seem to be an issue regarding the new version of Silverligh and Windows.
I would recommend re-installing the .NET 4.0 framework on the server.
After doing this, check IIS and make sure the application pool which is running Dundas Dashboard is set up to use ASP.NET 4.0 (not 2.0).
This one has been driving me nuts for a few days now and I've tried Google but no luck (judging from my good luck with finding answers on google, this is a rarity for me not to find an answer).
To cut a long story short, I did have the capability to compile my mxml files via the browser on my local machine. I've had to do a reinstall but now I'm having problems trying to compile.
My current setup is:
WAMP 2.0i
- Apache 2.2.8
- PHP 5.2.8
- MySQL 5.1.36
FlashDevelop 3.0.0 RC1
Win XP
I've tried compiling in Firefox 3.5, IE8 & Chrome but all receive the same error:
Compilation results
Errors, warnings or exceptions were found while compiling null.Visit the online Flex documentation or API reference for further information.
An error occured on the server. Server error is: 'Error occurred in server thread; nested exception is: java.lang.NoSuchMethodError: flex.license.License.(Ljava/util/Map;Ljava/lang/String;Lflex/license/Logger;)V'
I've followed the instructions from adobe:
http://labs.adobe.com/wiki/index.php/Flex_Module_for_Apache_and_IIS
but no luck. I can compile without an issue via CMD but I prefer to use the browser as I find that much faster. Has anyone run into this issue and solved it?
Cheers!
DNT
Edit:
I forgot to mentioned I've tried using the Flex 2 & 3 SDK to no avail.
I believe I can safely say I've answered my own question.
Rather than using a program to clear out the registry (eg ccleaner), run the uninstall on the "flex module for Apache & IIS" then do a reboot.
Once you get back into windows, 'stop all services' in wamp and check that your httpd.conf file has removed the entry:
#BEGIN FLEX INSTALLER EDITS - REMOVE ONLY ON UNINSTALL
LoadModule flex_module "D:/your/path/to/modules/mod_flex.dll"
AddHandler flex .mxml
#END FLEX INSTALLER EDITS - REMOVE ONLY ON UNINSTALL
Now go wild and run the 'flex module for apache & IIS' installer, answer the questions and when you get to the end, do the reboot and it should work.
What a PITA!
I FINALLY found the answer!
Got a new pc for work so I had to reinstall everything and I've found the solution that worked flawlessly.
Use this link to download the Adobe Flex SDK which is over 100MB; ignore the Open Source Flex SDK download links. At the time of writing, I downloaded version 3.4.0.9271:
http://opensource.adobe.com/wiki/display/flexsdk/Download+Flex+3
Make sure you follow the Installation Instructions up until the To install the Flex module heading.
http://labs.adobe.com/wiki/index.php/Flex_Module_for_Apache_and_IIS#Installation
Then go to this page and under the main heading Flex 3 Compiler Modules then under the sub heading 3.0.0.477, download the file FlexModule_apache.exe and follow the installation instructions and you should be home free!
http://opensource.adobe.com/wiki/display/flexsdk/Downloads