When I import libPTP in OMNeT++, I need to install Boost++ Libraries. I installed the Boost++ Libraries according to the Install Guide, but it didn't work. The following error occurred:
Errors occurred during the build.
Errors running builder 'OMNeT++ Makefile Builder' on project 'libPTP'.
Path must include project and resource name: /boost
Do I need to set the path of Assembly, GNU C and GNU C++ to C:\boost of the Includes tab when I do the step ‘Add the path where you have installed Boost (e.g. C:\boost)`?
Looking forward to your reply. Thank you.
Best Regards,
Fei
I am using TWR-K20D72M and I opened a Sample program which is given in the MQX 4.0.1 Demo examples. When I choose Build tool option as Freescale
the program compiles OK but When I choose Build tool option as GCC It gives me error.The Error is below
error
Description
mingw32-make: *** No rule to make target `C:/Freescale/Freescale_MQX_4_0/lib/twrk20d72m.cw10gcc/debug/bsp/intflash.ld', needed by `explicit-dependencies'.
I read somewhere that The GCC can only work with MQX 4.0.1 and above so I am using MQX 4.0.1 .
Can some suggest me the reason for this error.How I can I remove this error.......
Thanks
You are missing the linker script file for your project intflash.ld.
Normally this file is located on
{mqx_install_dir}\mqx\source\bsp\{your_bsp_name}\gcc_cw
and is copied to
{mqx_install_dir}\lib\{your_bsp_name}.cw10gcc\debug\bsp
and
{mqx_install_dir}\lib\{your_bsp_name}.cw10gcc\release\bsp
after the build process by the scripts for your bsp, located on
{mqx_install_dir}\mqx\build\bat.
Take a look inside your bsp script and verify that intflash.ld is being copied correctly.
My guess is that you compiled your MQX application before compiling the BSP and PSP. With the release of CodeWarrior 4.6, the solution has gotten a bit easier through the use of .wsd files.
If you look at the FSL_MQX_getting_started.pdf, section 2.4 describes how to find a .wsd file which needs to be dragged into your CodeWarrior Project Explorer. Once this is done new projects will be added to your workspace. Compile the bsp_... and psp_... and any other libs that you require (usb, ethernet etc) which will generate binaries and the intflash.ld file in the correct location.
http://cache.freescale.com/files/soft_dev_tools/doc/support_info/FSL_MQX_Getting_Started.pdf
I'm trying to compile the "GTK# Hello World" example at http://mono-project.com/Mono_Basics in Windows 7 (64bits). I'm getting this error:
error CS8027: Couldn't run pkg-config: ApplicationName='pkg-config', CommandLine
='--libs gtk-sharp-2.0', CurrentDirectory=''
I have successfully compiled and run the "Console Hello World" example.
I have installed Mono-2.10.8.
Thanks in advance for your help
I tried to compile a GTK# example in a Windows 7 with Mono 2.10.8 and the options you used with the compiler, so i have the same error then i tried to reference each assembly by hand so it works fine.
Here is the full command, i tested in a Mono 2-10.8 comman prompt.
gmcs ButtonApp.cs -r:C:/PROGRA~2/MONO-2~1.8/lib/mono/gtk-sharp-2.0/pango-sharp.dll,C:/PROGRA~2/MONO-2~1.8/lib/mono/gtk-sharp-2.0/atk-sharp.dll,C:/PROGRA~2/MONO-2~1.8/lib/mono/gtk-sharp-2.0/gdk-sharp.dll,C:/PROGRA~2/MONO-2~1.8/lib/mono/gtk-sharp-2.0/gtk-sharp.dll
I hope this can helps
You were trying to use pkg-config which you do not have. pkg-config with --libs turns specified packages (like gtk-sharp-2.0 in your case) into references to libraries. If you don't want to install pkg-config, you have two options:
manually reference needed libraries with compiler options;
create a project with these libraries referenced.
I recommend the second option, as compiling by specifying all sources and references directly could be good for hello-world examples, but not for the something bigger. You would make your own script to compile the project, so why not use something designed just for that - like xbuild or make. MonoDevelop should contain empty Gtk# project template.
I need to install OpenCV on Win32. I do not have it installed currently. I downloaded OpenCV-2.0.0a-win32.exe and ran it. What the heck do I do now? There are no .lib's and whatnot.
I found some instructions for building the release using cmake at http://opencv.willowgarage.com/wiki/InstallGuide . I downloaded the latest and greatest cmake, and tried to follow the instructions, but I was guessing. No joy.
I specified VC++9 when I did the "configure," but cmake built a VC++ 6 dsw file. No vcproj. I converted the dsw into a vc++9 vcproj anyway, just to see if it would work. Nope. It compiled lots of files, but many failed because it could not find omp.h. Sure enough, it's not there, anywhere. The build log said, 'A tool returned an error code from "Performing Custom Build Step".'
I am lost.
Ideally, I would like to find a full installation with all the files pre-built for Win32 vc++ 2008. Failing that, I need instructions that even I can follow. Short sentences and small words, but lots of them.
Please help!
UPDATE: I tried to build just CXCORE. It complained, "cannot open file 'VCOMPD.lib'" There's that OMP again.
For version 2.0, you must build the project from source.
Here's what you will need:
The OpenCV installer.
CMake. Here's the CMake installer.
Instructions for using CMake to install OpenCV-2.0.01-win32. Those instructions need an extra step if you are using a vc++ Express edition. In that case you must un-check ENABLE_OPENMP when running the CMake GUI.
Instructions for setting up an application project. (Thanks to mloskot for this find.)
If you've installed OpenCV-2.0.0a-win32.exe then it will install pre-built DLLs and libs. Then you just have to follow the instructions in this tutorial.
I recommend that you wipe the folder you previously installed OpenCV2.0 in and reinstall it.
Update:
Well sorry it didn't work out. I suggest the following then: check out the latest version from the SVN repository, https://code.ros.org/svn/opencv/trunk/opencv with any SVN client - I use TortoiseSVN.
Then run CMake (I see you've already installed it) on the source folder and then compile the Solution file. This should work - it does for me.
I apologize for my old answer - I had started off with OpenCV a few months ago in the same way and assumed that downloading the Gold version would still work - apparently not.
OMP
The OMP issue may arise from the checked Enable OpenMP in the CMake config. Try unchecking that .. might solve your initial problem.
I followed Jive Dadson's procedure to get OpenCV2.0 to work on Visual Studio 2010 Express (disabled OMP).
All went good until compilation of the generated stuff in Debug and Release. In both cases got this error: "LINK : fatal error LNK1181: cannot open input file '../../lib/Release/cv200.lib'"
in debug the only difference is that the library is cv200d.lib.
EDIT: I solved by downloading the latest svn snapshot for OpenCV2.0. One additional thing on Vista/7: it may be good to execute CMake as administrator.
Download OpenCV installer for Windows
Read OpenCV-2.0.0a-win32.Readme.Please.txt
Follow OpenCV with Visual C++ 6.0, 2005 Express, and 2008 Express in order to create project using OpenCV
I'm using libcurl in a Win32 C++ application.
I have the curllib.vcproj project added to my solution and set my other projects to depend on it.
How do I build it with SSL support enabled?
Well, since this post failed badly, I had to dig into the matter myself.
Also check out the other answers and comments for additional info regarding other versions etc.
EDIT: Since I posted this Q there seems to be ready-built binaries made available from the curl homepage. Check out James' answer.
So here goes:
-
Preprocessor
The following two symbols need to be fed to the preprocessor to enable SSL for libcurl:
USE_SSLEAY
USE_OPENSSL
(libcurl uses OpenSSL for SSL support)
Alternatively the symbols can be added directly to a file called setup.h in libcurl, but I'm not too happy about modifying code in 3rd party distributions unless I really have to.
Rebuilding the libcurl library, I now got some errors about OpenSSL include files not being found. Naturally, since I haven't set up the OpenSSL distribution properly yet.
Compiling OpenSSL binaries
I downloaded the OpenSSL 0.9.8 source distribution and unpacked it.
In the root of the source distribution there's a file called INSTALL.W32 which describes how to compile the OpenSSL binaries. The build chain requires perl, so I installed the latest version of ActivePerl.
I had some trouble with the build, which might not be applicable to all systems, but I'll go through it here in case somebody experiences the same.
According to INSTALL.W32:
Run the following commandline tasks with current directory set to the source distribution root:
1> perl Configure VC-WIN32 --prefix=c:/some/openssl/dir
(Where "c:/some/openssl/dir" should be replaced by the dir where OpenSSL should be installed. Don't use spaces in this path. The compilation further ahead will fail in that case)
2> ms\do_ms
For me this step was unsuccessful at first, since I lacked the environment variables OSVERSION and TARGETCPU. I set these to 5.1.2600 and x86 respectively. You may get complaint about OSVERSION being "insane", but look closer, this error is for WinCE and doesn't affect the Win32 setup. To get hold of your OS version, run the 'ver' command from a command prompt or run winver.exe.
3> nmake -f ms\nt.mak (for static library)
or
3> nmake -f ms\ntdll.mak (for DLL)
The source now compiles. Took approx 5 minutes on my laptop.
When compilation is completed, the libs or binaries have been placed in:
distroot/out32 - for static library build
or
distroot/out32dll - for DLL build
Building and linking
Now, back to visual studio and point out the libs and include path for headers. The include files are located in distroot/inc32/openssl.
Remember to add libeay32.lib and ssleay32.lib as linker input.
Rebuild the libcurl project.
Error!
Well at least for me with this version of OpenSSL.
it complained about a struct typedef in one of the OpenSSL headers. I couldn't find any info on this. After an hour of googling I broke my own principle and commented out the typedef from the OpenSSL header, and luckily libcurl wasn't using that symbol so it built fine.
Update: As pointed out by Jason, this issue seems to have dissapeared as of version 1.0.0a.
Now, for confirming that SSL support is enabled for libcurl, run the following code:
curl_version_info_data * vinfo = curl_version_info( CURLVERSION_NOW );
if( vinfo->features & CURL_VERSION_SSL )
// SSL support enabled
else
// No SSL
Simple as that.
Maybe this isn't the answer anyone is looking for, but I simply just downloaded the precompiled DLLs from this link found at http://curl.haxx.se/download.html
I ran the test that sharkin provided, and if( vinfo->features & CURL_VERSION_SSL ) proved to be true.
Following Robert Oschler's advice, here is my comment on the question as answer :
You can build recent libcurl (2012) with native SSL support for windows using the preprocessor symbols: USE_WINDOWS_SSPI and USE_SCHANNEL instead of the OpenSSL ones.
When compiling OpenSSL 1.0.0 on Windows with Visual Studio 2010, it eventually threw a 0x2 error:
NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual Studio 10.0
\VC\BIN\cl.EXE"' : return code '0x2'
Stop.
It seems that this error will be thrown because of a flag in the perl Configure file, namely -WX.
As the MSDN documentation states:
Treats all compiler warnings as errors. For a new project, it may be best to use /WX in all compilations; resolving all warnings will ensure the fewest possible hard-to-find code defects.
After removing the -WX occurrences in the Configure file and re-entering the commands stated here it built fine and passed all tests.
In my case follow the curl README file was enough.
My configuration is the following:
Visual Studio 2015 (VC14)
Static library
Win64
curl version 7.57.0
OpenSSL 1.0.2
Compilation of libCurl
Download libcurl source there: https://curl.haxx.se/download.html
Uncompress the file and go to the folder curl-7.57.0\projects
Open the README file and follow the instructions, this lead me to do the following:
Downloaded OpenSSL
Extract it and rename it to openssl, put it aside the curl folder, this is important as you'll open the VS project that expect to find openssl there.
Install Perl
Execute the utility build-openssl.bat to perform the compilation of openSSL. With my settings this became the following:
.\build-openssl.bat vc14 x64 release ..\..\openssl\
just runs .\build-openssl.bat -help to know more about the parameters.
After that you can see OpenSSL has been compiled as you got a new folder here: openssl\build\Win64
Open the Visual Studio project curl-7.57.0\projects\Windows\VC14\curl-all.sln
Be sure to set the visual studio project to the build configuration you need (LIB Release - LIB OpenSSL in my case)
Build all
The library is located at curl-7.57.0\build\Win64\VC14\LIB Release - LIB OpenSSL\libcurl.lib
Remarks
Don't forget to define the CURL_STATICLIB preprocessor in your own project
With static library, you will have to links with the dependencies of libcurl, see this answer
You might not want to depend on LDAP, in that case you can disable it by setting the preprocessor CURL_DISABLE_LDAP before you compile libcurl.
If you build with Visual Studio IDE and get 58 odd warnings as the likes of
"inconsistent dll linkage curl_global_init / curl_msnprintf /..."
you should add CURL_STATICLIB to the preproccessor definitions.
so the entire definition line should look like:
USE_SSLEAY;USE_OPENSSL;CURL_STATICLIB.
With this all the warning will disappear.
Some would ignore the warnings and go on using the libs, but then will get corresponding *error*s as the likes of curl_global_init / curl_msnprintf. It can be very annoying.
Hope it can help somebody.
\ fatal error C1083: Cannot open include
file: 'stdlib.h': No such file or directory
NMAKE: fatal error U1077::return code
That error can be solved by executing vcvarsall.bat in Visual Studio.
How to build libcurl C/C++ with OpenSSL (SSL support) on Windows
Install libcurl
Install OpenSSl
Build libcurl with OpenSSL
Installing libcurl
Go to the download page of libcurl and donwnload the ZIP file under Source Archives. In my case it is called curl-7.58.0.zip
Extract the archive and open projects/Windows/VC15/curl_all.sln with Visual Studio.
Installing OpenSSL
Download the windows binary of OpenSSL. In my case, I downloaded the windows installer file Win32 OpenSSL v1.1.0g from the Shining Light Productions distribution.
The installation folder for me is C:\OpenSSL-Win32.
Building libcurl with OpenSSL
In the curl_all.sln Visual Studio solution file, change the build configuration to DLL Debug - DLL OpenSSL.
In the Solution Explorer, right click the project curl and go to Properties.
Under Linker -> General modify Additional Library Directories and add the path to your OpenSSL directory + \lib. In my case, this is C:\OpenSSL-Win32\lib.
Apply and close the properties window.
Right click the project libcurl and do the same as the previous step, add OpenSSL directory + \lib to Additional Library Directories under Linker -> General.
Under C/C++ -> General, add C:\OpenSSL-Win32\include to the Additional Include Directories.
Finally go to Linker -> Input and modify Additional Dependencies. Replace all the lib files to the following:
ws2_32.lib
wldap32.lib
openssl.lib
libssl.lib
libcrypto.lib
Apply and close the properties window.
With the DLL Debug - DLL OpenSSL build configuration still selected, go to Build -> Build Solution.
Copy the two dll files libcrypto-1_1.dll and libssl-1_1.dll from the OpenSSL bin directory (C:\OpenSSL-Win32\bin) to the just created build directory curl-7.58.0\build\Win32\VC15\DLL Debug - DLL OpenSSL.
Validating Build
Inside the build directory, run curld.exe. If it runs with no errors (missing dll, etc.) then your build was successful.
i did "do_nt.bat" for windows 7 rc7100
don't forget "nmake -f ms\nt.mak install" to copy the headers correctly
thanks this did help a lot
Couple of notes in response to and/or in addition to the above..
First, if you don't want to mess with ActivePerl, Strawberry Perl is terrific and worked perfectly for this.
Second, in lieu of using do_ms.bat, I would recommend preferring do_masm if possible since, according to INSTALL.W32,
This is worth doing because it will
result in faster code: for example it
will typically result in a 2 times
speedup in the RSA routines.
Also, build 0.9.8l (L) of OpenSSL was a nightmare so I eventually gave up and reverted to 0.9.8k which built and linked (statically) with libcurl 1.9 without issue.