I have Windows 7, and need to migrate to Windows 10 because I must install Visual Studio (which doesn't work on Win7 anymore). As I read, Windows 10 online update does not delete any of my files or programs.
What would happen to my Android Studio, will it work same as before, after update is preformed?
UPDATE: Windows 10 could not detect my second monitor, everything else is doing fine for now. I found this helpful for second monitor solution. Just updating nvidia and reboot did the job.
I didn't have to reinstall the software when I upgraded from windows 7 to windows 10. It worked just fine for me.
According to the site below, if you’re running Windows 7, you can preserve Windows settings, personal files, and most apps during the upgrade to Windows 10.
http://www.intowindows.com/you-can-upgrade-to-windows-10-preview-without-losing-installed-programs/
i am using windows 8 64 bit, while installation autocad software, in the begin of installation
the error 1606 occured , what to do to install the autocad in windows 8 64 bit, why this problem is taking place
Thanks
I am using Acad 2010 on a Win8.1 x64. What i did is i turned off windows defender then i used a 32 bit setup file using 64bit files...i took the 32bit setup file pasted it in the 64bit files after removing the Acad 64bit setup. Worked for me.
AutoCAD versions prior than 2014 are not compatible with Win8, see here for autodesk products compatibility list
Since you're aware of that, I've installed acad 2012 on win 8 and I haven't got any issue once installed.
Your issue strongly looks like the one described here: http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=8164400&linkID=9240617
I hope this helps.
I have a slight problem... I need to connect the Windows Phone 6 emulator to internet. That requires Virtual PC 2007. However, VPC 2007 is not supported for Windows 7. When I try to run the setup program Windows tells me the program is blocked due to compatibility issues. Running the setup file in Compatibility Mode didn't help either.
What to do ? o_O
I've used the method described on this blog dozens of times. It has workaround instructions for 32 and 64 bit Windows 7.
I have a setup created using Vb6. I am unable to install it under Windows 7. Windows 7 is not registering OCX controls included in the setup.
Same setup works fine under Windows XP and all other previous Microsoft operating systems.
Windows 7 OS is 64 bit.
Also, I have tried all compatibility mode which is available under Windows 7 without much luck.
Unfortunately I don't have source code with me. Otherwise I could have ported entire source to Dot Net.
VS6 popped off a series of errors before bombing out completely during install on Windows 7. I specifically need to get VB6 functioning on Windows 7. Anyone having any luck?
Folks on the VB6 newsgroup report they have managed to get it working on Windows 7.
There's this step-by-step guide on how to install the IDE on Windows 7 (including 64 bit).
If that doesn't work (scrapes barrel) try this old tip about persuading the install not to install the Java VM? Link is now broken so here is the tip:
Before trying to install VB6. Create a new file, name it msjava.dll and place it in your windows directory. The file can be zero length. You can then happily install without the prompt to install an old version of Microsoft's flavour of Java. Once you have installed VB6, delete the msjava.dll otherwise windows update will prompt you to update it.
Or (scrapes hole in barrel) these tips from an article about getting the IDE working on Vista?
Footnote: if developing with ADO, be aware of this.
The only way I've found that works is Windows XP mode (i.e. a virtual machine). Works fine there, but otherwise, not at all.
I found ALL the answers in a thread at vbmonster.com. As mentioned above, you CAN install Visual Studio 6 with Service Pack 6 under Windows 7 by following Derek's detailed instructions at fortypoundhead.com.
I had a problem because I needed to install Service Pack 5. I use a third party program that does not work with Service Pack 6. A really smart programmer (GuideX) came up with a great hack to get around the MDAC 2.5 error.
Win 7 64 bit service pack 5 & 6. Turn compatability off and it seems to work.
Recently I had to debug an ancient application written in Visual C++ 6.0 on Windows 8.1. Tried different solutions all of them failed, only this one worked.
This guys made a special installer that allows installing VC++6, VB6, and SP6 on Windows Vista/7/8/8.1/10 without any errors whatsoever.
Hope it would be helpful to someone.
I installed VB6 on Windows 7 Pro without having to use compatibility settings or run as administrator.
Doesn't really help you, but does show that it can work.
Several people in my office have installed Visual Studio 6 (without VC++) on Windows 7, both 32-bit and 64-bit with no problems. The one thing we have in common: we've all turned UAC down to it's lowest setting. Nothing else special required.
I am using vb6 on windows 7 32 bit system for a long time.
you will need to install your vb6 with compatibility of xp2.
Create a 0-byte file in the C:\Windows directory called msjava.dll.
Don't just install via the Autorun executable; instead browse the Visual Studio 6 CD (or folder), right-click Setup.exe and select Run As Administrator.
On any Program Compatibility Assistant warnings, click Run Program.
Step through the setup screens until you're able to choose Custom Setup, then click next.
On the setup options, install the following items and nothing else:
Microsoft Visual Basic 6.0
ActiveX
Data Access
Graphics
Click continue and the process will start, and (hopefully) eventually complete.
Skip the installations of the MSDN CD, BackOffice, VSS and SNA Server, and clear the checkbox for "Register Now". Setup should be complete.
Download the VB6 Service Pack 6 from http://www.microsoft.com/downloads/en/confirmation.aspx?FamilyID=A8494EDB-2E89-4676-A16A-5C5477CB9713&displaylang=en and install.
Change the compatibility settings for Visual Basic (to get it to run a little more smoothly under Windows 7) by browsing to C:\Program Files\Microsoft Visual Studio\VB98, right-clicking the VB6.exe file, and selecting properties.
On the Compatibility tab, check the following:
Run this program in compatibility mode for Windows XP (Service Pack 3)
Disable Visual Themes
Disable Desktop Composition
Disable display scaling on high DPI settings
When you start up the IDE, you may get a notification saying that the color scheme has been changed to Windows 7 Basic, but it will be changed back to Aero once you exit. Everything should be working fine at this point!
Note: when you first run your new install vb6 run it with admin rights and with xp2 compatibility so that your exe can run on any system.
The word "supported" is used loosely in this thread, potentially leading the unwary reader to the conclusion that Microsoft supports the VB6 IDE (that is, the integrated development environment) on operating systems beyond Windows XP. This fact clearly is stated in the table that appears on the page at this link:
https://blogs.msdn.microsoft.com/nikosan/2012/04/20/support-statement-for-visual-basic-6-0-on-windows-8-updated/
Note that executables developed using VB6 are in fact compatible with Windows OS's from Windows XP through Windows 10--32/64-bit versions:
https://blogs.windows.com/buildingapps/2015/06/22/getting-ready-for-windows-10-sdks-compatibility-bridges/
Anyone using non-standard methods to coax the IDE into working on OS's that Microsoft does not support is exposing themselves/their organizations/their employers to risk and is not suitable for risk-averse organizations.
Having said that, I think the purest solution is to install Windows XP onto a virtual machine and run that VM in a modern host OS, such as Windows 10. That works just fine, and you can install directly from the VB6 Setup disc without making any pre-install/post-install customizations.
I had a Vista x64 box with a working copy of the VB6 IDE (which was supported). I upgraded the OS to Windows 7 x64 and the VB6 IDE still works fine. You could try that. I know, a huge PITA and kludgy but still, it worked for me.
I run Windows 7 Ultimate 32-bit, installed Windows Virtual PC - XP Mode, and that solved my problem isince I can run MSDEV 6.0 in the XP Window.
Not esay to install XP Mode though, the MS site is buggy.
The VB6 programming language is supported on the Windows 10 Technical Preview.
Visual Vasic 6 applications run and the VB6 IDE installs and works too.
I have the VB6 IDE running OK on Win-XP-16, Win-7-32, Win-7-64, Win-8.1-32, Win-8.1-64, win-10-32 and win-10-64 by using the instructions above which basically say, turn off UAC, run the installer AS ADMIN, and then set the VB6.exe file to run in XP-SP3 Compatibility mode.
I have had some issues with it and have had to do a bit more googling to solve these but I don't remember any more what those issues or solutions were.
I've even got the VB3 IDE running on the 32-bit versions of XP, Win-7, Win 8.1 and Win-10 - without even installing them - just copied the C:\VB folder from another computer and copied the *.LIC license files and *.VBX etc files as well.
I have successfully installed vb6 on win 7 32 bit by installing xp first then installing new win 7, (not upgrade), and do not format. then it will install vb6 without a problem
It's depending on your build version of Windows 7.
If your Win7's version is lower or is not updated, it has MANY PROBLEMS with compatibility.
But mine is newer Win7 version and has NO COMPATIBILITY TROUBLE.
I am currently using VB6 , VS6 and they still work fine!
If Properties->Compatibility->Windows XP doesn't help, fix it with UPDATING your Win7.