I installed parallels plesk panel 9.5 for windows, on windows server 2003 x64, now I can not uninstall, I get this error:
The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed.
Windows is not running in safe mode, and i try to install windows installer, but i cant.
And not that way I can do to uninstall. can help me with this problem?
I just finished uninstalling Plesk Panel 11 using the Windows "Uninstall a program" feature. It seemed to work as it displayed a DOS window and informed me of each module it was uinstalling but it did not remove anything from IIS. Also the entire Parallels directory structure was still fully intact after the uninstall "successfully" completed.
I had to manually remove websites and application pools from IIS and manually delete the entire directory and file structure in windows explorer. However, in order to do this I had to first stop all the MailEnable Services as well as end the Process for METray.exe.
In other words, removing Plesk Panel completely was a mostly manual process.
Parallels plesk 9.5 and 10.1-10.3 does not support uninstall as for unix/linux as for windows OSes.
If i'm not mistaken plesk supports uninstall for windows starting from 10.4 or it's 11 version. Need to reread release notes.
As options for uninstall might be following:
Try to upgrate to plesk 11 and them uninstall plesk (accually I do not so sure in this option and will be good to check it before trying on real server);
redeploy server if it doesn't important for you;
stop panel at the services and do not care about it. Also you can remove panel from filesystem and from iis manually.
Related
I have downloaded the IIS Powershell snapin IISPowershellSnapin.26IISPowershellSnapin.exe
Unfortunately installing on a windows 2012 Remote desktop doesn't succeed.
The error is:
Microsoft Webinstaller couldn't find the product you tried to install.
Either the link you clicked is incorrect or you may be overwriting
your feed with different feed.
I have downloaded it from the site:
http://www.iis.net/downloads/microsoft/powershell
The manual gives the following Prerequisites:
The IIS PowerShell Snap-in requires the following prerequisites:
•Windows Server 2008, Windows Server 2008 R2, Windows Vista Service
Pack 1, or Windows 7 •Microsoft PowerShell 1.0 or 2.0
So nothing is said about Windows Server 2012.
Is there another executable for Windows Server 2012 or is there another problem.
http://www.iis.net/learn/manage/powershell/installing-the-iis-powershell-snap-in
I have allready checked whether the IIS Management Console is installed and it is installed.
Maybe this executable needs internet connection to install?
On our RDP we have no internet connection so this could be the cause as well.
Simply don't. PSSnapIns are obsolete; everything runs on modules now. The IIS Snap-In has been superseded by the WebAdministration module, which provides a superset of functionality.
Install the module on a >2008R2 server with the following PS:
Add-WindowsFeature Web-Scripting-Tools
This will not cause a service interruption. If it needs a reboot, it will tell you so. You might need to restart your PowerShell console, although this is unnecessary in my experience. After installation, run the cmdlet:
Import-Module WebAdministration
I am trying to install Visual Studio 2015 to my Windows 7. I seem to get stuck in this screen while installing it. It has been like 3 hours now and still stuck. Tried installing that update manually but had no luck since it just kept loading as well (Searching for updates).
Any ideas?
The same thing happened to me. Here is what I did in order to get it successfully installed. I downloaded KB2999226 update from Microsofts website here: https://www.microsoft.com/en-us/download/details.aspx?id=49093
After installing this package, I started the installation process again. That worked for me.
I would like to give you a background on Universal CRT this would help you in understanding as to why the system should be updated before installing vc_redist.x64.exe.
A large portion of the C-runtime moved into the OS in Windows 10 (ucrtbase.dll) and is serviced just like any other OS DLL (e.g. kernel32.dll). It is no longer serviced by Visual Studio directly. MSU packages are the file type for Windows Updates.
In order to get the Windows 10 Universal CRT to earlier OSes, Windows Update packages were created to bring this OS component downlevel. KB2999226 brings the Windows 10 RTM Universal CRT to downlevel platforms (Windows Vista through Windows 8.1). KB3118401 brings Windows 10 November Update to the Universal CRT to downlevel platforms.
Windows XP (latest SP) is an exception here. Windows Servicing does not provide downlevel packages for that OS, so Visual Studio (Visual C++) provides a mechanism to install the UCRT into System32 via the VCRedist and MSMs.
1.The Windows Universal Runtime is included in the VC Redist exe package as it has dependency on the Windows Universal Runtime (KB2999226).
Windows 10 is the only OS that ships the UCRT in-box. All prior OSes obtain the UCRT via Windows Update only. This applies to all Vista->8.1 and associated Server SKUs.
For Windows 7, 8, and 8.1 the Windows Universal Runtime must be installed via KB2999226. However it has a prerequisite update KB2919355 which contains updates that facilitate installing the KB2999226 package.
Why does KB2999226 not always install when the runtime is installed from the redistributable? What could prevent KB2999226 from installing as part of the runtime?
The UCRT MSU included in the VCRedist is installed by making a call into the Windows Update service and the KB can fail to install based upon Windows Update service activity/state:
1) If the machine has not updated to the required servicing baseline, the UCRT MSU will be viewed as being “Not Applicable”.
Ensure KB2919355 is installed. Also, there were known issues with KB2919355 so before this the following hotfix should be installed.
KB2939087
KB2975061
2) If the Windows Update service is installing other updates when the VCRedist installs, you can either see long delays or errors indicating the machine is busy.
a. This one can be resolved by waiting and trying again later (which may be why installing via Windows Update UI at a later time succeeds).
3) If the Windows Update service is in a non-ready state, you can see errors reflecting that.
a. We recently investigated a failure with an error code indicating the WUSA service was shutting down.
To identify if the prerequisite KB2919355 is installed there are 2 options:
Registry key:
64bit hive
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages\Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
CurrentState = 112
32bit hive
HKLM\SOFTWARE[WOW6432Node]Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages\Package_for_KB2919355~31bf3856ad364e35~x86~~6.3.1.14
CurrentState = 112
Or check the file version of:
C:\Windows\SysWOW64\wuaueng.dll
C:\Windows\System32\wuaueng.dll
7.9.9600.17031 or later
I was stuck with the same problem. I found this page with all the possible versions of the KB2999226 also know as Update for Universal C Runtime in Windows.
https://support.microsoft.com/en-au/kb/2999226
I download the x64 version and it work perfectly in my Windows 7 Ultimate.
Today i also face this type of problem during visual studio 2015 Community installation. As i have 64bit OS. I used https://www.microsoft.com/en-us/download/details.aspx?id=49093 link to update KB2999226 mannualy.
Try It. Good luck.
Same thing happened to me and I got it working doing this:
Do not cancel the installation (using the cancel button), instead force showdown your computer so the process is killed and you get a reboot.
After the reboot, just start the install process again.
This worked for me.
Just kill wusa.exe and install KB2999226 manually. Installation will continue without any problems.
I faced this problem after installing clean Windows 7 Ultimate 64 bit OS,
When I search about KB2999226 install fails during Visual Studio I also saw that I couldn't install any other updates.
By the way, I found a solution. When formatting some PCs with ( maybe ) partly corrupted bootable media, first Update for windows not completely installed.
As a solution;
1- Disable update for windows from Control Panel.
2- Restart your pc.
3- Install KB3102810 windows update. ( First update for Windows )
Microsoft TR links;
( 64 bit ) https://www.microsoft.com/tr-TR/download/details.aspx?id=49540
( 32 bit ) https://www.microsoft.com/tr-TR/download/details.aspx?id=49542
4- Restart your pc via finished setup.
5- Try getting updates, or manually setup KB2999226.
I could install this way.
Have a nice days.
I managed to solve the problem by the following steps :
1. Disable windows updates(but check the option "let users install updates manually")
2. Reboot the PC
3. Manually install kb2999226 update from VS install folder (packages/Patch/x64/Windows6.1-KB299926-x64.msu)
4. Start the VS install
5. After install is finished turn back automatic updates
I have the same problem today, stuck on the kb2999226 for over an hour. First, i thought it is because i am using a VM on my local machine. But decided to cancel the installation, then install kb2999226 first, then install the vs2015 community again, it works out much better, the installation move forward and progressing.
thx.
Another workaround is to turn off Internet connection, reboot and restart VS installation. Without Internet connectivity VS installer won't try to update Windows first and will continue without delay.
I am writing my first Powershell script to automate the installation of Windows Software Development Kit (SDK) for Windows 8. I plan to install it on a Hyper-V VM running on Windows Server 2012. I have the .exe file (sdksetup.exe) necessary for the install. I've looked into answer files, but it seems they require a disc. I need to be able to press "Next" a few times, uncheck some preset boxes, and agree to a EULA, all automatically. I am fine with the default location of installation as well. It seems so simple, yet I haven't found any really good resources on the web yet. Thanks in advance.
VS6 popped off a series of errors before bombing out completely during install on Windows 7. I specifically need to get VB6 functioning on Windows 7. Anyone having any luck?
Folks on the VB6 newsgroup report they have managed to get it working on Windows 7.
There's this step-by-step guide on how to install the IDE on Windows 7 (including 64 bit).
If that doesn't work (scrapes barrel) try this old tip about persuading the install not to install the Java VM? Link is now broken so here is the tip:
Before trying to install VB6. Create a new file, name it msjava.dll and place it in your windows directory. The file can be zero length. You can then happily install without the prompt to install an old version of Microsoft's flavour of Java. Once you have installed VB6, delete the msjava.dll otherwise windows update will prompt you to update it.
Or (scrapes hole in barrel) these tips from an article about getting the IDE working on Vista?
Footnote: if developing with ADO, be aware of this.
The only way I've found that works is Windows XP mode (i.e. a virtual machine). Works fine there, but otherwise, not at all.
I found ALL the answers in a thread at vbmonster.com. As mentioned above, you CAN install Visual Studio 6 with Service Pack 6 under Windows 7 by following Derek's detailed instructions at fortypoundhead.com.
I had a problem because I needed to install Service Pack 5. I use a third party program that does not work with Service Pack 6. A really smart programmer (GuideX) came up with a great hack to get around the MDAC 2.5 error.
Win 7 64 bit service pack 5 & 6. Turn compatability off and it seems to work.
Recently I had to debug an ancient application written in Visual C++ 6.0 on Windows 8.1. Tried different solutions all of them failed, only this one worked.
This guys made a special installer that allows installing VC++6, VB6, and SP6 on Windows Vista/7/8/8.1/10 without any errors whatsoever.
Hope it would be helpful to someone.
I installed VB6 on Windows 7 Pro without having to use compatibility settings or run as administrator.
Doesn't really help you, but does show that it can work.
Several people in my office have installed Visual Studio 6 (without VC++) on Windows 7, both 32-bit and 64-bit with no problems. The one thing we have in common: we've all turned UAC down to it's lowest setting. Nothing else special required.
I am using vb6 on windows 7 32 bit system for a long time.
you will need to install your vb6 with compatibility of xp2.
Create a 0-byte file in the C:\Windows directory called msjava.dll.
Don't just install via the Autorun executable; instead browse the Visual Studio 6 CD (or folder), right-click Setup.exe and select Run As Administrator.
On any Program Compatibility Assistant warnings, click Run Program.
Step through the setup screens until you're able to choose Custom Setup, then click next.
On the setup options, install the following items and nothing else:
Microsoft Visual Basic 6.0
ActiveX
Data Access
Graphics
Click continue and the process will start, and (hopefully) eventually complete.
Skip the installations of the MSDN CD, BackOffice, VSS and SNA Server, and clear the checkbox for "Register Now". Setup should be complete.
Download the VB6 Service Pack 6 from http://www.microsoft.com/downloads/en/confirmation.aspx?FamilyID=A8494EDB-2E89-4676-A16A-5C5477CB9713&displaylang=en and install.
Change the compatibility settings for Visual Basic (to get it to run a little more smoothly under Windows 7) by browsing to C:\Program Files\Microsoft Visual Studio\VB98, right-clicking the VB6.exe file, and selecting properties.
On the Compatibility tab, check the following:
Run this program in compatibility mode for Windows XP (Service Pack 3)
Disable Visual Themes
Disable Desktop Composition
Disable display scaling on high DPI settings
When you start up the IDE, you may get a notification saying that the color scheme has been changed to Windows 7 Basic, but it will be changed back to Aero once you exit. Everything should be working fine at this point!
Note: when you first run your new install vb6 run it with admin rights and with xp2 compatibility so that your exe can run on any system.
The word "supported" is used loosely in this thread, potentially leading the unwary reader to the conclusion that Microsoft supports the VB6 IDE (that is, the integrated development environment) on operating systems beyond Windows XP. This fact clearly is stated in the table that appears on the page at this link:
https://blogs.msdn.microsoft.com/nikosan/2012/04/20/support-statement-for-visual-basic-6-0-on-windows-8-updated/
Note that executables developed using VB6 are in fact compatible with Windows OS's from Windows XP through Windows 10--32/64-bit versions:
https://blogs.windows.com/buildingapps/2015/06/22/getting-ready-for-windows-10-sdks-compatibility-bridges/
Anyone using non-standard methods to coax the IDE into working on OS's that Microsoft does not support is exposing themselves/their organizations/their employers to risk and is not suitable for risk-averse organizations.
Having said that, I think the purest solution is to install Windows XP onto a virtual machine and run that VM in a modern host OS, such as Windows 10. That works just fine, and you can install directly from the VB6 Setup disc without making any pre-install/post-install customizations.
I had a Vista x64 box with a working copy of the VB6 IDE (which was supported). I upgraded the OS to Windows 7 x64 and the VB6 IDE still works fine. You could try that. I know, a huge PITA and kludgy but still, it worked for me.
I run Windows 7 Ultimate 32-bit, installed Windows Virtual PC - XP Mode, and that solved my problem isince I can run MSDEV 6.0 in the XP Window.
Not esay to install XP Mode though, the MS site is buggy.
The VB6 programming language is supported on the Windows 10 Technical Preview.
Visual Vasic 6 applications run and the VB6 IDE installs and works too.
I have the VB6 IDE running OK on Win-XP-16, Win-7-32, Win-7-64, Win-8.1-32, Win-8.1-64, win-10-32 and win-10-64 by using the instructions above which basically say, turn off UAC, run the installer AS ADMIN, and then set the VB6.exe file to run in XP-SP3 Compatibility mode.
I have had some issues with it and have had to do a bit more googling to solve these but I don't remember any more what those issues or solutions were.
I've even got the VB3 IDE running on the 32-bit versions of XP, Win-7, Win 8.1 and Win-10 - without even installing them - just copied the C:\VB folder from another computer and copied the *.LIC license files and *.VBX etc files as well.
I have successfully installed vb6 on win 7 32 bit by installing xp first then installing new win 7, (not upgrade), and do not format. then it will install vb6 without a problem
It's depending on your build version of Windows 7.
If your Win7's version is lower or is not updated, it has MANY PROBLEMS with compatibility.
But mine is newer Win7 version and has NO COMPATIBILITY TROUBLE.
I am currently using VB6 , VS6 and they still work fine!
If Properties->Compatibility->Windows XP doesn't help, fix it with UPDATING your Win7.
'The installer was interrupted before [project name] could be installed. You need to restart the installer to try again.'
I just moved to Win7, and I cannot get the .msi files to install from my Web Setup Projects that are built on that machine. The same projects build and work fine on my other Windows XP, IIS6, VS 2008 SP1 machine. I'm not sure if this is a IIS7 or Win7 issue, but I've done the following:
I have all the IIS/ASP.net compatibility settings checked.
I am an administrator, and I have UAC turned off.
I get the following error when I even try install the .msi file on the Win7 machine and on our existing development server (windows 2003 with IIS6).
I've restarted the windows installer service, and I've added logging for the installer but there is nothing that is showing me what the problem is. Any help would be MUCH appreciated.
I'm running Visual Studio 2005 and had the same problem as you described when moving to Windows 7.
After trying my Web Setup Project .msi file on another computer also running Windows 7 I found that it worked.
When I looked in the "Windows Features" dialog on the working computer I noticed that the IIS had IIS 6 compatibility features turned on. I enabled the same feature on my computer and after that I could install my setup project.
Open up "Control Panel > Programs > Turn Windows features on or off" in Windows 7 and in the "Windows Features" dialog go to "Internet Information Services > Web Management Tools > IIS 6 Management Compatibility" and check the feature "IIS Metabase and IIS 6 configuration compatibility".
Run the installer with full verbose logging:
msiexec /i /lv installLog.txt
Then search the installLog.txt file for "Return Value 3"
This will indicate the exact problem.
Additionally this may help:
http://blog.dragonsoft.us/2009/01/02/visual-studio-2008-and-iis-7/
I solved this by running 'regsvr32.exe actxprxy.dll'
It resolved the following:
Not able to create valid .msi web project in VS 2008.
Start Page in VS2008 was not displaying rss feed in the main window.
IE was not opening up shorted url links to a new tab (in twitter for example).
I suspect this was because of redirects, but I'm not sure. I'm guessing this was a bug in the install process, so I hope this helps others.