I'm trying to install WinDbg from this page, just under the Debugging Tools for Windows 10 (WinDbg) section. However, when I download the executable and run it, it tells me that
You must uninstall the Windows Software Development Kit - Windows 10.0.10586.15 before you can install the latest version of the kit.
I'm guessing this probably has to do with the fact that I already have VS 2015 (and the Windows 10 SDK) installed. However, when I go to the Developer Command Prompt and type in
> where windbg
it tells me that it can't find WinDbg. How, then, do I install it without doing anything drastic (like reinstalling Visual Studio)?
I just ran into this same problem (with a slightly newer version of the SDK) when setting up a VM with Windows 10 and Visual Studio 2015. Following the general rule (or at least, what used to be the general rule), I installed Visual Studio first before attempting to install the SDK.
Even though I picked all the options in the Visual Studio install, and I appear to have gotten large portions of the SDK, I didn't get the debugging tools or the application verifier, which I wanted. The "Debuggers" folder was empty. Yet when I tried to download and install the standalone Windows 10 SDK, I got the error message you quote, that I needed to uninstall the SDK before I can install the latest version.
Microsoft's site is absolutely no help. It gives no clues about the appropriate way to install the software. Harry Johnston's comment got me going in the right direction.
After installing Visual Studio 2015, you already have the Windows 10 SDK. You do not need to download it separately. To get the additional tools on Windows 10:
Open Settings → System → "Apps and features".
Scroll down to "Windows Software Development Kit".
(I had two versions of it installed. The top one was newer. I'd recommend that you proceed with the newer version for the following steps.)
Select it, and click "Modify". Then, because it's Windows 10 and everything is harder than it needs to be, click "Modify" again.
The installer will launch. Select the "Change" option, and click "Next".
Place a check next to the additional features/tools you want, click "Change" to start the process.
After waiting some time, it will have downloaded and installed the additional portions of the SDK. You should now be good to go!
(This does seem like a bug in my case. The two versions of the SDK (the one I have installed and the one whose installer I downloaded) are identical (both are for version 10.0.10586.212), so running the standalone installer should just launch the same setup tool that you are able to launch from Settings, enabling me to Change/Remove Features. Oh well, at least this works.)
I am installing an old version of VB6. I had installed a previous version of the software, but uninstalled it. Now I get an error saying 'setup has detected that the service pack version of this system installed is newer that the update you are applying to it'. I searched in the registry for the appropriate keys to modify, however I have not found same. Any help would be appreciated.
Which versions do you have installed of VB6 and of the servicepack?
I suggest you uninstall all VB6 related items, reboot, and then install VB6 again.
After that download servicepack 6 from SP6 from the microsoft site and install that.
If you are still having problems you might try to uninstall all versions of visual studio and install in order of release, so first install VB6 and then install VB.net
I did a reinstall on my machines several times (xp, w7-32b, x7-64b) and never had any problems, but I always installed VB6 first, then its SP6, and then Visual Studio (2005) with its servicepacks, and then checked the windows update to make sure I didn't miss anything.
I'm trying to install Visual Studio 2005 on a Windows 7 box but am repeatedly getting the same error. When I run the installer it starts to run then pops up with a message saying:
"A problem has been encountered while loading the setup components. Canceling setup."
Various suggestions has said that maybe the install is corrupted so I downloaded a fresh copy of the ISO from MSDN today, same issue. Another suggestion is that installing from the ISO may be the issue so I extracted the contents of the ISO to a folder on my HDD, same issue. I have also tried running the files as administrator and in XP compatability mode, same issue.
Searching for this issue the most common responses I've found have been about installing SP1, however I cannot get the base product to install and therefore cannot apply SP1.
Does anyone have any further suggestions as to what I can do to fix this issue and get VS2005 installed? If anyone wants any log files of any variety I am happy to supply so long as you tell me where to look as I'm not sure.
As for why I am using VS2005 and not a newer product, it is required for the ongoing support and maintenance of some older applications we manage. These cannot be easily migrated to a newer version of Visual Studio without some considerable investment of time and that would probably be longer than the time it will take to develop newer, replacement applications (which is currently in progress). Until the new applications are available though we need to maintain an environment to use.
Did you try running setup.exe in compatibility mode with Windows XP? Some discussion here on how to do this.
Another alternative since you alluded to having an MSDN subscription. Download Windows XP and install it into a VM. (If HyperV isn't already in installed with your Win7, you can add it from Control Panel->Programs&Features->Turn Windows Features on/off). Then install VS2005 from there.
I had a msi installer which has custom action install and uninstall runs perfectly on windows xp and 7. That project was on vs 2005. Then I update that to vs 2010. Now it works fine in windows 7
but when I try to install it on windows xp sp3, it is not working.
I'm getting "There is a problem with this windows installer package..." error. It seems my custom action install don't get start from the msi.
what could have gone wrong?
It's likely a dependency problem. It's hard to say without knowing what language your CA is written in (C++?) but check that you have the right dependencies either linked to your CA or installed on the target machine. Depends is your friend.
Error was I'm missing mfc100.dll in Win XP. When I installed Visual C++ redistributable package 2010 for Windows form it works fine.
VS6 popped off a series of errors before bombing out completely during install on Windows 7. I specifically need to get VB6 functioning on Windows 7. Anyone having any luck?
Folks on the VB6 newsgroup report they have managed to get it working on Windows 7.
There's this step-by-step guide on how to install the IDE on Windows 7 (including 64 bit).
If that doesn't work (scrapes barrel) try this old tip about persuading the install not to install the Java VM? Link is now broken so here is the tip:
Before trying to install VB6. Create a new file, name it msjava.dll and place it in your windows directory. The file can be zero length. You can then happily install without the prompt to install an old version of Microsoft's flavour of Java. Once you have installed VB6, delete the msjava.dll otherwise windows update will prompt you to update it.
Or (scrapes hole in barrel) these tips from an article about getting the IDE working on Vista?
Footnote: if developing with ADO, be aware of this.
The only way I've found that works is Windows XP mode (i.e. a virtual machine). Works fine there, but otherwise, not at all.
I found ALL the answers in a thread at vbmonster.com. As mentioned above, you CAN install Visual Studio 6 with Service Pack 6 under Windows 7 by following Derek's detailed instructions at fortypoundhead.com.
I had a problem because I needed to install Service Pack 5. I use a third party program that does not work with Service Pack 6. A really smart programmer (GuideX) came up with a great hack to get around the MDAC 2.5 error.
Win 7 64 bit service pack 5 & 6. Turn compatability off and it seems to work.
Recently I had to debug an ancient application written in Visual C++ 6.0 on Windows 8.1. Tried different solutions all of them failed, only this one worked.
This guys made a special installer that allows installing VC++6, VB6, and SP6 on Windows Vista/7/8/8.1/10 without any errors whatsoever.
Hope it would be helpful to someone.
I installed VB6 on Windows 7 Pro without having to use compatibility settings or run as administrator.
Doesn't really help you, but does show that it can work.
Several people in my office have installed Visual Studio 6 (without VC++) on Windows 7, both 32-bit and 64-bit with no problems. The one thing we have in common: we've all turned UAC down to it's lowest setting. Nothing else special required.
I am using vb6 on windows 7 32 bit system for a long time.
you will need to install your vb6 with compatibility of xp2.
Create a 0-byte file in the C:\Windows directory called msjava.dll.
Don't just install via the Autorun executable; instead browse the Visual Studio 6 CD (or folder), right-click Setup.exe and select Run As Administrator.
On any Program Compatibility Assistant warnings, click Run Program.
Step through the setup screens until you're able to choose Custom Setup, then click next.
On the setup options, install the following items and nothing else:
Microsoft Visual Basic 6.0
ActiveX
Data Access
Graphics
Click continue and the process will start, and (hopefully) eventually complete.
Skip the installations of the MSDN CD, BackOffice, VSS and SNA Server, and clear the checkbox for "Register Now". Setup should be complete.
Download the VB6 Service Pack 6 from http://www.microsoft.com/downloads/en/confirmation.aspx?FamilyID=A8494EDB-2E89-4676-A16A-5C5477CB9713&displaylang=en and install.
Change the compatibility settings for Visual Basic (to get it to run a little more smoothly under Windows 7) by browsing to C:\Program Files\Microsoft Visual Studio\VB98, right-clicking the VB6.exe file, and selecting properties.
On the Compatibility tab, check the following:
Run this program in compatibility mode for Windows XP (Service Pack 3)
Disable Visual Themes
Disable Desktop Composition
Disable display scaling on high DPI settings
When you start up the IDE, you may get a notification saying that the color scheme has been changed to Windows 7 Basic, but it will be changed back to Aero once you exit. Everything should be working fine at this point!
Note: when you first run your new install vb6 run it with admin rights and with xp2 compatibility so that your exe can run on any system.
The word "supported" is used loosely in this thread, potentially leading the unwary reader to the conclusion that Microsoft supports the VB6 IDE (that is, the integrated development environment) on operating systems beyond Windows XP. This fact clearly is stated in the table that appears on the page at this link:
https://blogs.msdn.microsoft.com/nikosan/2012/04/20/support-statement-for-visual-basic-6-0-on-windows-8-updated/
Note that executables developed using VB6 are in fact compatible with Windows OS's from Windows XP through Windows 10--32/64-bit versions:
https://blogs.windows.com/buildingapps/2015/06/22/getting-ready-for-windows-10-sdks-compatibility-bridges/
Anyone using non-standard methods to coax the IDE into working on OS's that Microsoft does not support is exposing themselves/their organizations/their employers to risk and is not suitable for risk-averse organizations.
Having said that, I think the purest solution is to install Windows XP onto a virtual machine and run that VM in a modern host OS, such as Windows 10. That works just fine, and you can install directly from the VB6 Setup disc without making any pre-install/post-install customizations.
I had a Vista x64 box with a working copy of the VB6 IDE (which was supported). I upgraded the OS to Windows 7 x64 and the VB6 IDE still works fine. You could try that. I know, a huge PITA and kludgy but still, it worked for me.
I run Windows 7 Ultimate 32-bit, installed Windows Virtual PC - XP Mode, and that solved my problem isince I can run MSDEV 6.0 in the XP Window.
Not esay to install XP Mode though, the MS site is buggy.
The VB6 programming language is supported on the Windows 10 Technical Preview.
Visual Vasic 6 applications run and the VB6 IDE installs and works too.
I have the VB6 IDE running OK on Win-XP-16, Win-7-32, Win-7-64, Win-8.1-32, Win-8.1-64, win-10-32 and win-10-64 by using the instructions above which basically say, turn off UAC, run the installer AS ADMIN, and then set the VB6.exe file to run in XP-SP3 Compatibility mode.
I have had some issues with it and have had to do a bit more googling to solve these but I don't remember any more what those issues or solutions were.
I've even got the VB3 IDE running on the 32-bit versions of XP, Win-7, Win 8.1 and Win-10 - without even installing them - just copied the C:\VB folder from another computer and copied the *.LIC license files and *.VBX etc files as well.
I have successfully installed vb6 on win 7 32 bit by installing xp first then installing new win 7, (not upgrade), and do not format. then it will install vb6 without a problem
It's depending on your build version of Windows 7.
If your Win7's version is lower or is not updated, it has MANY PROBLEMS with compatibility.
But mine is newer Win7 version and has NO COMPATIBILITY TROUBLE.
I am currently using VB6 , VS6 and they still work fine!
If Properties->Compatibility->Windows XP doesn't help, fix it with UPDATING your Win7.