When I create a new project in vs2010, it shows that
"server tfsserver1\Test1 doesn't offer team foundation server".
I'm confusing that my tfs server is tfsserver1, and vs2010 can connect to tfsserver1 too. What's tfsserver1\Test1? I reinstalled vs2010, but the problem still exists. Any ideas how I can solve this?
In Visual Studio 2010, go to the Team menu, and click on Connect To Team Foundation Server.
In the dialog that pops up, click the Servers.. button to see which servers you're connected to, and add and remove them as required.
I guess just becuase my vs2010 been destroyed by something reason,when I reinstall it, everything is ok.
Related
Using Visual Studio 2015 I was previously working on a project which is in an old Visual Source Safe repository.
I needed to connect to a project in Visual Studio Online (Team Foundation Server) and so in Tools -> Options -> Source Control -> Plug In Selection I choose Team Foundation Server and successfully connected to the Visual Studio Online repository pulled down the code, worked on it and checked it in.
The problem comes when I need to access the project in VSS again. I tried to reverse the process. Setting the Plug In Selection back to Visual Source Safe. However even when I don't have a solution open the 'Team Explorer' is still connected to Visual Studio online and I can't connect back to VSS. When I open my VSS based project it is STILL connected to Visual Studio Online as well.
I don't have the option of moving the older project out of VSS just now (not my choice, I'm hoping it's going to change soon but not a choice I can make), and need to carry on working on it. I basically need to disconnect VS from VSO and can't, and can't connect to anything else instead.
Has anyone come across this problem and a solution to it? I've searched but only find answers about disconnecting a project from it's current source control, I don't want to do that, I want each project to remain with it's source control, but I need to be able to choose which source control VS is connected to.
Well I've found AN answer eventually, through trial and error... it's a bit of a faff.
First thing is I forgot that VSS doesn't use the Team Explorer. When I opened the VSS based project the project HAD actually connected to VSS, but the Team Explorer wasn't reflecting that. So I could carry on working on my VSS based project and just ignore Team Explorer.
However I still wanted to disconnect, because it had only been a one-off requirement to connect to that Visual Studio Online project.
What I did was...
1. Log out of my Microsoft account from Visual Studio.
2. Close and re-open Visual Studio.
3. Click close on the prompt to log in to my Microsoft account.
4. THEN the option to delete the connection was available in Team Explorer. Pretty sure it hadn't been there before.
5. Log back in to my Microsoft account.
Unfortunately I had also reset my Microsoft Account password in the trial and error, which I now think was unnecessary. I was just trying to force VS to stop connecting to that repository.
As Team Explorer is not use with VSS you may want to use "Team | Disconnect from TFS" to disconnect. Then switch your control...
Note: As VSS as been completely unsupported for many years you are incurring a significant business risk by staying with it. Have you raised this risk with your executive team? Do they know that their organisational asset is at risk?
I just started working in Visual Studio 2012 in a project group. We are using team foundation server to share our code. I have a couple of problems here I was hoping someone could help me solve them.
I have succesfully connected to our TFS-server and checked out the project, but for some reason when I check my solution explorer it says "0 solutions". I dont know if this is a problem but I feel like it has something to do with my other problems.
I can't, for some reason, press the play button to start debug, also in the menu the debug option is greyed out, 5 obv doesent work either. And in the "project" tab I dont have the option to set my project as startup project wich would make it so that I can debug it.
Check your Source Control Explorer. There you can navigate the code in TFS. Make sure there are files checked in to this location. If not, you will first have to add your project to TFS.
If there are files in TFS, map the files to a location on your harddrive. Then open the solution file by double clicking it in your Solution Explorer.
The MSDN has a nice walktrough: Set Up Team Foundation Server for Version Control
It turns out the local path has to be in the visual studidio\projects folder... re-mapped it and works as intended. No need to answer this anymore, thanks for your suggestions though :)
I have a project on vs 2010. I have tried to add project on windows server 2003 which has tfs 2010 installed. Later on I have switched to windows server 2008 and then installed tfs 2010 again. But I have changed server name.
Now, when I try to add project to tfs, I receive and error says that;
Team Foundation services are not available from server http://old server name:8080/tfs/. Technical information (for administrator): The remote name could not be resolved: 'old server name'
I have tried to add different projects but I havent received any errors. I am thinking problem is like, visual studio installed on my client computer has registered project with old server name and still tries the same server but team explorer can not find the server.
what shall I do?
PS: I am not tring to get my codes on old server. I did not use tfs, just wanted to learn it.
If you get the message when you open Visual Studio then you need to go to Team Explorer and click the "Connect to Team Project" button, then click on the "servers" button and remove the old server. If you need to you can also add the new server here.
If it's when you're opening the solution then you need to remove the Source Control bindings
open the solution and then go to "File", "Source Control", "Change Source Control" this will open up a screen where you can Unbind the Projects and Solutions from the old server.
I have a problem that is described here: TFS: cannot set up new build
I use Visual Studio 2008. Unfortunately, the solution provided there, didn't help.
I tried to remove and add again my TFS server - no help. Also, it's not a problem with security policies or lack of proper right, because I can initiate a new build, with the same user through Visual Studio 2005, also installed on my computer.
In addition my colleagues have no problems at all.
If someone else have experienced similar problem - I will appreciate any help !
If your getting the red cross it is likely that it is a permissions problem. From the 'Team Explorer' window within VS2008, right-click on your project node and select the 'Team Project Settings->Group Membership' menu option. From there trace down the group that your user belongs to.
Next, again right-click on your project node in the 'Team Explorer' window, this time selecting the 'Team Project Settings->Security' option. Within this dialog, find the security settings for your user group. Ensure that the 'Allow' checkbox is set for the 'Start a build' property. Confirm any changes and exit.
I have found that it is best to restart IIS on the TFS server to ensure that the chances are picked up.
Good luck !
Here is what I did. I don't know why the problem is fixed, but it's ok ... for now.
I installed the Microsoft Team Foundation Server 2008 Power Tools and exclusively installed the integration of the tools with Visual Studio. Then I did the following instructions again:
I decided to add my user (just me, not from some domain group) in to the permission menu options ... Then, from security option menu I checked the 'start a build' option at my user and restarted the Visual Studio.
After restarting the Source control menu is a little bit different from what it was before, but at least I can start builds now. Hope It's forever :)
Is the server running TFS 2005 or 2008?
Have you tried running the diagnostics in the BPA Tool?
EDIT:
Team Build had many breaking changes between 2005 and 2008. VS 2008 cannot create new build definitions on a 2005 server. Details: http://blogs.msdn.com/buckh/archive/2007/07/27/team-build-compatibility-between-2005-and-2008.aspx
Our TFS server has some temporary connectivity issues right now, and as such VS has gone unresponsive, leaving 50+ developers unable to work!
Is it possible to switch TFS into an offline mode in the event of such an issue?
See this reference for information on how to bind/unbind your solution or project from source control. NOTE: this doesn't apply if you are using GIT and may not apply to versions later than VS2008.
Quoting from the reference:
To disconnect a solution or project
from source control
In Visual Studio, open Solution
Explorer and select the item(s) to
disconnect.
On the File menu, click Source
Control, then Change Source Control.
In the Change Source Control dialog
box, click Disconnect.
Click OK.
The 'Go Offline' extension adds a button to the Source Control menu.
https://visualstudiogallery.msdn.microsoft.com/6e54271c-2c4e-4911-a1b4-a65a588ae138
plundberg: The "disconnect" button is only available for the TFS provider starting in VS 2008. Even then, I'm not sure if it's officially supported. The recommended way to use the Go Offline feature is to [re]open the solution.
Martin Pritchard: if you get stuck mid-operation, you can force VS to timeout by pulling the network plug (literally) or running ipconfig /release.
Once you're marked offline, here's a step by step guide to working in that mode: http://teamfoundation.blogspot.com/2007/12/offline-and-back-again-in-vs2008.html
More detailed info on tweaking the behind-the-scenes behavior:
http://blogs.msdn.com/benryan/archive/2007/12/12/when-and-how-does-my-solution-go-offline.aspx
http://blogs.msdn.com/benryan/archive/2007/12/12/how-to-make-tfs-offline-strictly-solution-based.aspx
There are couple of little visual studio extensions for this purpose:
For VS2010 & TFS 2010, try this
For VS2012 & TFS 2010, use this
In case of TFS 2012, looks like there is no need for 'Go offline' extensions. I read something about a new feature called local workspace for the similar purpose.
Alternatively I had good success with Git-TF. All the goodness of git and when you are ready, you can push it to TFS.
Depending on which tool windows you have open, VS may or may not try to hit the team server automatically when it starts up.
For best results try this:
Close all instances of visual studio
Open an empty visual studio (no project/solution)
See which windows are opened by default, if source control explorer or team explorer or any other windows that use team are opened (and activated) by default, close them or switch them to a background tab.
Close visual studio
You should notice now that you can start visual studio without it trying to hit the TFS server.
I know its just an aside to your problem, but I hope you find this helpful!
If you have a solution open, and TFS is down, you might have trouble going into offline mode. If you close and reopen your solution, a nice little dialog will appear asking you if you want to Go Offline.
Alternatively if you don't want to close/reopen the solution, (as suggested by Bernie) you can install the TFS Go-Offline plugin, then click:
TEAM -> Go Offline
Simply, change the root folder name for your solution in your local machine, it will disconnect automatically.
I just wanted to include a link to a resolution to an issue I was having with VS2008 and TFS08.
I accidently opened my solution without being connected to my network and was not able to get it "back the way it was" and had to rebind every time I openned.
I found the solution here;
http://www.fkollmann.de/v2/post/Visual-Studio-2008-refuses-to-bind-to-TFS-or-to-open-solution-source-controlled.aspx
Basically, you need to open the "Connect to Team Foundation Server" and then "Servers..." once there, Delete/Remove your server and re-add it. This fixed my issue.
If the code has already been checked out by the user that if offline and they have the latest version on their local hd, then they just need to browse to the solution location and open the solution by double clicking sln file. The solution will open in disconnected mode.