I have a problem that is described here: TFS: cannot set up new build
I use Visual Studio 2008. Unfortunately, the solution provided there, didn't help.
I tried to remove and add again my TFS server - no help. Also, it's not a problem with security policies or lack of proper right, because I can initiate a new build, with the same user through Visual Studio 2005, also installed on my computer.
In addition my colleagues have no problems at all.
If someone else have experienced similar problem - I will appreciate any help !
If your getting the red cross it is likely that it is a permissions problem. From the 'Team Explorer' window within VS2008, right-click on your project node and select the 'Team Project Settings->Group Membership' menu option. From there trace down the group that your user belongs to.
Next, again right-click on your project node in the 'Team Explorer' window, this time selecting the 'Team Project Settings->Security' option. Within this dialog, find the security settings for your user group. Ensure that the 'Allow' checkbox is set for the 'Start a build' property. Confirm any changes and exit.
I have found that it is best to restart IIS on the TFS server to ensure that the chances are picked up.
Good luck !
Here is what I did. I don't know why the problem is fixed, but it's ok ... for now.
I installed the Microsoft Team Foundation Server 2008 Power Tools and exclusively installed the integration of the tools with Visual Studio. Then I did the following instructions again:
I decided to add my user (just me, not from some domain group) in to the permission menu options ... Then, from security option menu I checked the 'start a build' option at my user and restarted the Visual Studio.
After restarting the Source control menu is a little bit different from what it was before, but at least I can start builds now. Hope It's forever :)
Is the server running TFS 2005 or 2008?
Have you tried running the diagnostics in the BPA Tool?
EDIT:
Team Build had many breaking changes between 2005 and 2008. VS 2008 cannot create new build definitions on a 2005 server. Details: http://blogs.msdn.com/buckh/archive/2007/07/27/team-build-compatibility-between-2005-and-2008.aspx
Related
I am trying to check for my build definition under team explorer build option. I am not getting any options. It is blank.
Any idea how I can get my Build definitions.
I am working in VS 2013
If you are using the same user account on another system in VS2013, this issue seems only related to your local VS 2013.
Try to close the VS, clear both TFS and VS cache, then reopen it.
Every time I try to build my solution in VS2013, nothing builds, no errors - But in the status bar it says: "This item does not support previewing"
I googled around a bit but have come up empty.
But if I right click on each project and select build it works fine.
Any ideas?
Perhaps this message is totally unrelated... Post hoc ergo propter hoc
Steps to reproduce on my machine:
Right Click any project in solution: select build
Status bar displays Build successful
Right click solution select build
Status bar displays : "This item does not support previewing"
Perhaps it isnt related, but it sure does appear to be.
I was able to fix this... Somehow nothing was selected to build in the solution configuration. I right clicked on the solution, went to properties and then selected COnfiguration Properties and clicked the Build box for all the projects...
I have no idea how they became unchecked, only thing I can think of is a co-worker was trolling me.....
I've had this problem (i.e. debug not starting, and no error message) with Visual Studio 2015 in the following two cases:
after loading a solution that had previously been built with Visual Studio 2010
and also after using the "save as" function in Visual Studio 2015 to update a solution that had been started with Visual Studio 2010 (using Save as updates the solution file and sets the active Visual Studio version to 14 - i.e. VS 2015).
In both cases, deleting the bin and obj directories under the startup project fixed the problem. It's also worth closing visual studio and making sure that there are no {yourprojectname}.vshost.exe processes still running - if there are then kill them before running visual studio again. On that note, if you have multiple versions of visual studio on your machine, you should also check that you don't have the same solution open in the other version of visual studio at the same time (I've done that one myself).
One of the comments here suggests disabling the "enable visual studio hosted process" option. Don't do that if you can at all avoid it: you'll lose lots of debugging functionality (particularly in the area of being able to edit code while your solution is running).
Hope that helps someone out there.
Solution for VS2015
"this item does not support previewing" vs2015 (Visual Studio 2015/2016)
Step 1. Go to Control Panel -> Programs and Features
Step 2. Uninstall all: Windows Software Development Kit - Windows 10.0.10586.15 (maybe you have diff ver)
Step 3. Download new latest Windows Software Development Kit
https://go.microsoft.com/fwlink/p/?LinkId=619296
Install & Create new project, Done!
Dclick on MainPage.xaml and you will see Loading designer...
1: Add below lines in App.conf
<specFlow>
<unitTestProvider name="MSTest"></unitTestProvider>
</specFlow>
2: add a reference to Microsoft.VisualStudio.QualityTestTools.UnitTestFramework.dll
right click on your project and select: Add Reference
3: add using Microsoft.VisualStudio.TestTools.UnitTesting; in Step Defination
4: goto feature file and run it. This is what solve my problem on vs2013
I faced same issue with .aspx file. I just right click on the .aspx file and select open with (HTML Editor). You can choose any form the list.
I have come across the same issue for me, I have opened a project in VS 2010 and then when I open the same in VS 2015 then his error has occurred.
Solution:
By Closing the VS2010 project solution fixed the issue.
I just started working in Visual Studio 2012 in a project group. We are using team foundation server to share our code. I have a couple of problems here I was hoping someone could help me solve them.
I have succesfully connected to our TFS-server and checked out the project, but for some reason when I check my solution explorer it says "0 solutions". I dont know if this is a problem but I feel like it has something to do with my other problems.
I can't, for some reason, press the play button to start debug, also in the menu the debug option is greyed out, 5 obv doesent work either. And in the "project" tab I dont have the option to set my project as startup project wich would make it so that I can debug it.
Check your Source Control Explorer. There you can navigate the code in TFS. Make sure there are files checked in to this location. If not, you will first have to add your project to TFS.
If there are files in TFS, map the files to a location on your harddrive. Then open the solution file by double clicking it in your Solution Explorer.
The MSDN has a nice walktrough: Set Up Team Foundation Server for Version Control
It turns out the local path has to be in the visual studidio\projects folder... re-mapped it and works as intended. No need to answer this anymore, thanks for your suggestions though :)
My issue is that I cannot add SourceSafe Database for source control within Visual Studio 2010.
Our team was initially using VSS for source control in Visual Studio 2010. During an evaluation of TFS, I switched my source control to TFS. It will be a few weeks before a decision is made on TFS, so I needed to switch my source control back to VSS. However I'm now unable to add a SourceSafe Database in Visual Studio.
Steps to Reproduce in Visual Studio 2010:
1) Access the 'Open SourceSafe Database' form via Tools->Options->Source Control->Plug-in Settings-->Advanced
or via File->Source Control
2) The list of available database is blank so I choose 'Browse'.
3) I browse to the srcsafe.ini file for my VSS database and select it.
4) I'm promted to confirm the Database Name - Click OK.
5) The database does not appear in the 'Open SourceSafe' Database form. The list of available databases is still blank.
Note that I can add the database fine outside of Visual Studio using VSS directly. However the databases I add via VSS do not appear in the Visual Studio forms.
I'm suspicious that this is related to "down-grading" from TFS to VSS which may not have been heavily tested at MS.
Any assistance is appreciated.
I installed VS2010, then i install VSS, then i have the same problem, cant connect to my VSS it by default opens (TFS)
the suggestion here, to reinstall, dont sound good, did a bit more searching and found this:-
http://social.msdn.microsoft.com/Forums/en/vssourcecontrol/thread/6c927805-bca6-445b-b406-0a0da8fa21d3
and found the easy solution that 'CletusLoomis' is looking for:
simply:-
hanks for your post.
Could you please try the following steps?
Open VS2010, then choose the menu: Tools->Options, then click "Souce Control"
click drop-down box under text"Current souce control plug-in", use "None", rather than "Microsoft Visual Source Safe"
thats it, problem solved!
:)
hope this helps someone else who found this page via google.
To do that you must run Visual Studio 2010 as Administrator. Just click on Icon using right button, Go to Properties, Compatibility, at the botton of screen you should mark Run this program as administrator.
That's all.
Must exist some file that the permission should be granted to all users, but instead of searching for the file, I preffer this solution.
Regards,
Luiz Ricci
My Visual Studio 2010 had very similar symptoms: having selected Visual SourceSafe 2005 in the Options I had the only menu option: Launch Microsoft SourceSafe
While following the steps provided by 'visual' (as of Nov 30 '10 at 8:00) I have found the following registry key, which needs to be switched to 0 to enable the SourceSafe menu options to be displayed in Visual Studio 2010. Once the registry key value has been changed to zero Visual Studio needs to be restarted and .. voila! Now I have an additional menu option Open from source control...
The registry key is as follows (for 32bit OS it would need to be slightly modified): HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\SourceSafe\Namespace Extension\DisableOpenFromSourceControl
Now, why it was disabled by default is beyond me.
Your installation of VS might be corrupted. I would recommend uninstalling VSS, VS, and TFS and then reinstalling VS and VSS. Unfortunately, this could take 4+ hours, but it should fix your issue.
I don't believe that my VS installation was corrupted. I do believe there is a bug in VS 2010 which does not allow me to use VSS for source control after having used TFS. Fortunately for me, our team decided to go forward with TFS for our project's source control. I never had to solve the problem. I believe that reinstalling Visual Studio alone would have been enough to solve the issue.
I had the same problem with Windows 7, Visual Studio 2010 and VSS. I noticed several things:
VSS as standalone program does always work on my system.
VSS works perfectly in my projects, if the UAC Level is the lowest, but not with the default UAC Level.
If I open a project file with VSS source control, Visual Studio tries to read the registry. It fails to read/write the keys in the registry with access denied. Therefore I changed the permissions in the registry of the SourceSafe keys to full access for all users. Now, VSS works perfectly on my system with default UAC security level.
I faced the same problem.
I am using Visual Studio 2010 and my projects added to Visual SourceSafe 6.0
The VSS database list was not prompted on my machine as well.
After a number of attempts for over 3 hours. Finally got a solution.
I run the VS2010 using Run As Administrator option. The VSS database list was visble.
I think the issue might be due to Access Rights of Registry in Windows 7.
What a nightmare this has been. Ultimately, you can set in domain or local policy.
Local Security Policy\Security Settings\Local Policies\Security Options\User Account Control: Run all administrators in Admin Approval Mode - Disabled
This means anyone in the administrator group does not have to have approval (The Dreaded Run as Administrator)to be an administrator. Can be set locally as above or domain wide. Solved a lot of problems for us.
Options -> Source Control -> Make sure the "Current Source Control Plugin" is correctly set.
Mine was set to Microsoft Visual Source Safe (Internet), and should have been Microsoft Visual Source Safe.
First, make sure you can view the database by visual source safe explorer.
Then, trying to proceed with these step...
Open Visual studio as Administrator.
Log in visual source safe by the database path. (it still disappears the database in "Available database" list.)
Our TFS server has some temporary connectivity issues right now, and as such VS has gone unresponsive, leaving 50+ developers unable to work!
Is it possible to switch TFS into an offline mode in the event of such an issue?
See this reference for information on how to bind/unbind your solution or project from source control. NOTE: this doesn't apply if you are using GIT and may not apply to versions later than VS2008.
Quoting from the reference:
To disconnect a solution or project
from source control
In Visual Studio, open Solution
Explorer and select the item(s) to
disconnect.
On the File menu, click Source
Control, then Change Source Control.
In the Change Source Control dialog
box, click Disconnect.
Click OK.
The 'Go Offline' extension adds a button to the Source Control menu.
https://visualstudiogallery.msdn.microsoft.com/6e54271c-2c4e-4911-a1b4-a65a588ae138
plundberg: The "disconnect" button is only available for the TFS provider starting in VS 2008. Even then, I'm not sure if it's officially supported. The recommended way to use the Go Offline feature is to [re]open the solution.
Martin Pritchard: if you get stuck mid-operation, you can force VS to timeout by pulling the network plug (literally) or running ipconfig /release.
Once you're marked offline, here's a step by step guide to working in that mode: http://teamfoundation.blogspot.com/2007/12/offline-and-back-again-in-vs2008.html
More detailed info on tweaking the behind-the-scenes behavior:
http://blogs.msdn.com/benryan/archive/2007/12/12/when-and-how-does-my-solution-go-offline.aspx
http://blogs.msdn.com/benryan/archive/2007/12/12/how-to-make-tfs-offline-strictly-solution-based.aspx
There are couple of little visual studio extensions for this purpose:
For VS2010 & TFS 2010, try this
For VS2012 & TFS 2010, use this
In case of TFS 2012, looks like there is no need for 'Go offline' extensions. I read something about a new feature called local workspace for the similar purpose.
Alternatively I had good success with Git-TF. All the goodness of git and when you are ready, you can push it to TFS.
Depending on which tool windows you have open, VS may or may not try to hit the team server automatically when it starts up.
For best results try this:
Close all instances of visual studio
Open an empty visual studio (no project/solution)
See which windows are opened by default, if source control explorer or team explorer or any other windows that use team are opened (and activated) by default, close them or switch them to a background tab.
Close visual studio
You should notice now that you can start visual studio without it trying to hit the TFS server.
I know its just an aside to your problem, but I hope you find this helpful!
If you have a solution open, and TFS is down, you might have trouble going into offline mode. If you close and reopen your solution, a nice little dialog will appear asking you if you want to Go Offline.
Alternatively if you don't want to close/reopen the solution, (as suggested by Bernie) you can install the TFS Go-Offline plugin, then click:
TEAM -> Go Offline
Simply, change the root folder name for your solution in your local machine, it will disconnect automatically.
I just wanted to include a link to a resolution to an issue I was having with VS2008 and TFS08.
I accidently opened my solution without being connected to my network and was not able to get it "back the way it was" and had to rebind every time I openned.
I found the solution here;
http://www.fkollmann.de/v2/post/Visual-Studio-2008-refuses-to-bind-to-TFS-or-to-open-solution-source-controlled.aspx
Basically, you need to open the "Connect to Team Foundation Server" and then "Servers..." once there, Delete/Remove your server and re-add it. This fixed my issue.
If the code has already been checked out by the user that if offline and they have the latest version on their local hd, then they just need to browse to the solution location and open the solution by double clicking sln file. The solution will open in disconnected mode.