Related
Problem:
When I hit "Commit..." under the Source Control menu in Xcode, the window comes up blank and I get a colorful pinwheel that doesn't stop spinning, so I have to force quit Xcode.
Details:
It's not a problem with Xcode in general because I can still commit other projects.
The version editor still works (I can still see previous commits I've made).
I've let the pinwheel run for over an hour, and still nothing happens.
I was able to commit this project up until a couple months ago. Since then, I added a few files to it, edited it a bit, updated Xcode if I remember right, and updated macOS.
Some of the files I added came from other projects.
I've tried removing some of the files I added and then committing, but that didn't work so I added them back.
I've tried cleaning the project, restarting Xcode, and restarting my mac.
I don't know much about source control, but I don't have anything fancy set up with a team or anything, it's just a local repository.
I've tried suggestions to delete various things inside the .xcodeproj file, to no avail.
I have Xcode 9.4.1
Any ideas?
If you have added big files (larger than 100mb) then sometimes Xcode has trouble with them. Try unstaging your commits and then committing them again. Finally try reverting back to the most recent version of your project and working from there.
I had the same problem. Sometimes selecting "Fetch and refresh status" works. The next time you go to commit the files will show up.
I found that rebooting my computer fixed the problem.
I've been having this problem for a couple weeks now. All of a sudden this happened to my project and I havent been able to fix it. Its a basic tab-bar app and i've barely even started heavy coding on it. Running xcode 4.6.2 (tried on 4.6 and 4.6.1 also).
The actual error says:
"Cannot run on the selected destination
The selected destination does not support the architecture for which the selected software is built. Switch to a destination that supports that architecture in order to run the selected software."
Thanks in advance.
Well here's my new fix: I had (for some reason) changed the highlighted line below:
I had changed the ${EXECUTABLE_NAME} to something else. Changing it back did not fix the issue immediately: I had to first click the + to add a new row then delete the new row.
My app runs fine now
OLD FIX:
OK, so yes, it's true, there are other questions like this one. They helped me figure out a different (and stranger) solution.
I right-clicked on my .xcodeproj file and chose "Show Package Contents"
I then opened "project.pbxproj"
I copied all the text from it to another file, deleted all the text from it and saved
This "crashed" my XCode Project that I had accidentally left open in XCode.
I closed my project, then pasted the original contents of "project.pbxproj" back into "project.pbxproj"
I saved "project.pbxproj" and closed it
After opening my XCode Project again, I was able to run it on my device!
To me, it doesn't make sense why this worked because I didn't modify an files... But it did, so hurrah!
PS
Back up your project beforehand, just in case.
EDIT: Well mine has stopped working again and I can't use the above method to fix it...
Cannot run on the selected destination
The selected destination does not support the architecture for which the selected software is built. Switch to a destination that supports that architecture in order to run the selected software.
I am using the Facebook-iOS-SDK from GitHub: https://github.com/facebook/facebook-ios-sdk
tested latest commit (2a030e795aed343e7614e149a5ebdfa78b223a72) and sdk-version-3.0.8 tag, both having the same problem. Tested the Hackbook, Scrumptious, FriendPickerSample on both iDevices and iSimulator.
It was working before (on older version of XCode), so it could be the xcode upgrade, but my other projects work fine. I've tried multiple solutions on this site which works for others but not on mine, does anyone encounter this before with Facebook-SDK specifically? Thanks in advance!
EDIT: I have found the issue, if you install the FacebookSDK and you add the resources folder to get the facebook image buttons there is a Info.plist file. XCodes goes weird with this info.plist file. I have deleted it, made a clean and now it works perfect :)
OLD:
The same behavior here. On another projects it runs perfectly but in this one I have always the same problem. After some XCode restarts sometimes it runs ok, sometimes I "click" on run and then nothings happens, sometimes it runs...
The best option is to move the project to other path. Adding and removing the libsql3.0 from lib dependencies sometimes works too.
Sadly, it seems like this is a bug on XCode, it will build and run fine for once every couple of restarts and with the entire project directory moved to other path. This is very sad because apple always make good products for consumer but all their developer software are crappy compared to big M's
I ran into this problem. It seemed to start right after XCode hung and I had to force quit. This was a day before the 4.6 update. I hoped that that update might fix the problem. And I did get one successful build before I started getting that message (actually in 4.6 there are two different but similar messages that seem to alternate.
I solve the problem by letting XCode update the project settings. I first noticed this possibility when I made a duplicate copy of my project and open that, but it is clear that this option is also available in the original. Here is what I did
In the Issues Navigator just under my project "MyProject project" I had a message MyProject.xcode
Validate Project Settings
Update to recommended settings.
I click on that and I was presented with a dialog box with 4 checkboxes some explanatory text and the option to perform changes. I just let Xcode make those changes and everything has been fine since.
Remove info.plist from Facebook Resources folder. Changed the location of XCode project and Reset the iPhone simulator...now it is working :) Buggy XCode !!
I've built a small app using storyboards and it ran great. Just before final testing I decided to try it out to see if it runs on iOS 4.3. I clicked on the gray 5.0 in the project settings and selected 4.3.
The app failed to build with the following error message:
Storyboards are unavailable on iOS 4.3 and prior
Both the iPhone and iPad storyboards tell me that.
The issue that when I switched back to iOS5 target, I still keep getting these errors from both storyboards, and the product won't build!
I checked: iOS Deployment target in projects settings is 5.0
Target app deployment target is 5.0
Build settings uses iOS 5.0 SDK
What else do I need to do to restore my project to a buildable state? Is this a brand new bug or am I forgetting something?
Update: I kept getting this error even after doing a clean.
I changed the debugger in Schemes to "LLDB" and did an additional clean, the project now builds and compiles
I also got this problem and finally I solved this by following procedure:
Open XXXXXX.storyboard
Open Identity and Type tab in your right view of Xcode.
Set the value of Development in Document Versioning to "Xcode 4.2" (my default value is "Default Version (Xcode 4.1)".
Change the value of Deployment from Project SDK Version (iOS 5.0) to iOS 5.0, then back to Project SDK Version (iOS 5.0)
Rebuild the project and the error should be resolved.
The solution that worked for me was just to delete the ~/Library/Developer/Xcode/DerivedData directory for my project.
I'm just going to add this one as another possible answer here, as the first solutions worked for me several times (as I mentioned in my previous comment) until today when I couldn't get my project to compile for love nor money with the same error.
With the debugger changed and Xcode set to 4.2 and restarting several times I could not compile. However I discovered another way to get around this issue.
Select the storyboard in the left column and 'Show in Finder' and drag the storyboard to the desktop. Xcode will now change its colour to red and be unable to compile.
Clean the project, drag the storyboard back from the desktop to the directory in finder.
Then, it builds and the error goes away again.
I don't know what triggered the error originally as I'm developing under iOS5 and building for 4.3, but it seems to come up from time to time and.
This seems to be a bug in the latest XCode that I've also run into too, did try the OP's solution of changing debugger and that had no effect.
It cropped up for me since I tried storyboard with 4.3 and then tried to change back.
My solution was to close XCode, open it again and clean. Then I compiled and it worked fine.
Hope this helps others.
While other solutions helped me, they didn't work 100% of the time. I don't know enough about XCode to know how reliable this solution is, but at least it worked for me so you can try it in your project.
In the left hand side of Xcode, open the project navigator. Click the top item, which is your project. In the panel immediately to the right, you'll see a choice to choose between your project and its targets. Click the project, and then in the panel to the right, under the "Info" tab, set "Command-line builds use" to Debug (in my two projects where I was having the error, both were set to Release).
A picture is probably easiest:
Another idea: Open another project with storyboards in Xcode and try to run that. If it succeeds, you can come back to the current project and it should build. I think this clearly indicates a bug in Xcode.
After trying all the answers in here (removing the Storyboard reference, quitting Xcode, cleaning, changing debugger, etc.), none worked (with Xcode 4.5).
The only way I got it to rebuild (and it was a total guess) was to open the Storyboard file in a text editor and delete the following line:
<deployment version="1280" identifier="iOS"/>
It should be near the top of the file, in the <dependencies> section. After that, the project was built successfully and Xcode even re-added that line to the file, but, it still builds...
Go figure...! Hopefully it can help someone!
At last, an elegant workaround that seems to do the trick for me! (I sure hope it works for everyone else. This one's stubborn.)
Once your settings are back safely in iOS 5-land, try Cmd-Option-Shift K (aka "Clean Build Folder..." from the menu - hold down Option to see it), then build.
the solution is simple,
right click your storyboard file, and show in finder
then select the folder where the file is (this would probably be in the en.lproj folder)
right click on the MainStoryboard.storyboard file causing the problem and open with text edit
find the line that reads or something like this:
<development version="4300" defaultVersion="4200" identifier="xcode"/>
and change it to something like this:
<development defaultVersion="4300" identifier="xcode"/>
save the file and build. Et voila...
Ok, I tried everything above and problem still occurred. So I just remove storyboards (as reference not move to trash). then build successfully; after that I added them again; Build, And finally worked.
I was having the same problem. I tried all the above answers and all combinations and nothing worked. Then later after doing some research, I analysed that the simple fact that the error that was throwing at me was straight forward.
Just go to the Build settings and instead of selecting the xcode project file, select the product file and change the Deployment target to 5.0 or 5.1. The error should go off.! I did this in Xcode 4.3 in Lion OSX. It worked fine for me!!
I also had this problem, and nothing helped. Even opening another project and trying to build failed.
What I did, and what for me, was going to project -> info and under "Deployment Target" change iOS Deployment Target to whatever, build and than change back to whatever it was and build again.
Here is yet another random, voodoo, flail that seemed to workaround the bug just now. (after other techniques here had not helped) I renamed the storyboard file (and the entry for it in the info.plist file). Haven't tried the "drag to/from desktop" ritual yet.
Tonight, I have lost like 45 minutes to this issue. grrrrr. Ok I feel better now.
After trying all the suggestions above, without success, I got my code to compile doing the following.
Edit -> Refactor -> Convert to Objective-C ARC
rm -rf $HOME/Library/Application Support/Developer/Shared/Xcode
rm -rf $HOME/Library/Preferences/com.apple.dt.Xcode.*
rm -rf $HOME/Library/Saved\ Application\ State/com.apple.dt.Xcode.savedState
rm -rf $HOME/Library/Developer/Xcode
seems to help with Xcode 4.3.2
Had similar issue. XCode would build and run other projects fine but couldn't get rid of the error on project I had changed, not even backups from server. Tried all the above solutions but nada. Here is what worked.
Uninstall XCode.
Delete user/library/developer/XCode folder.
Reinstall XCode (maybe you should start this before searching for the folder, download took me 20 minutes).
Start up, clean and build.
Worked for me. Saved me some time. Sometimes when the scalpel doesn't work it's time for the hatchet. Now I get to pick a new font to code in (this will clear your preferences)!
The only solution that has worked for me is to create another project without Storyboarding enabled, build it, then switch back to the storyboard project, clean and build.
Here is yet another random, voodoo, disconnect your iPhone if it is connected.
I simple changed deployment target to 4.0 and Development to 4.3 from MainStroyboard.
I clean the project; and restarted the mac, :) i know it sounds funny but restarting xcode didn't helped. maybe there is a cache in memory...
Then i built the project ; it was ok!
I am running a "old" Xcode 3 project in Xcode 4 and code sense is not working for my own classes. I have tried following:
Clean/rebuild
Remove Derived Data
Installing 4.3 documentation
Restart
Without any luck.
Sometimes the code sense works but mostly I just get "No Completions".
Try this:
Open Organizer then Project Tab.
Clear the "Derived Data". Xcode should re-index your project then and code sense should work. At least worked for me.
I know this is late, but for reference: http://sealedabstract.com/code/when-xcode-4s-code-completion-autocomplete-breaks/
Close the project, leaving XCode still running.
Open XCode’s Organizer window, go to the Projects Tab, select the correct project, and hit the Delete button next to “Derived Data”.
Quit XCode.
Navigate to your project’s .xcodeproject file in Finder. Right-click, choose “Show Package Contents.”
Leave the project.pbxproj file, but delete the project.xcworkspace file, any .pbxuser files, and the entire userdata folder.
Open the project in XCode. You will see XCode riding high on the CPU usage for around 10-60 seconds, depending on the size of your project. The activity window will say “Indexing”
When your CPU spike returns to earth, code completion will be working again.
There's a lot of deleting going on there so please be careful, but this definitely worked for me.
I've been doing this, and it's worked multiple times for me (after trying all of the above previously).
Edit: Now I just hit space, backspace (the mac version) and rebuild... works nice. Then, remember to scroll (sometimes the colors don't show up until you scroll somewhere)
Find your prefix file: "ProjectName_prefix.pch".
Comment out some line. (basically change it)
Build your project, doesn't matter if it fails or not.
Uncomment it.
Build again.
I'm betting only step 2 (modify the prefix) is what does it, but these essentially get you back to running. Suddenly everything magically recolors itself and completes functions.
Good luck if that doesn't fix it, perhaps try doing this to your dependency pch files (three20 or FB api's)
Clearing the "Derived Data" only works temporarily for me. I have to do it and then restart Xcode like 3-4 times each day to get code sense working again.
I found out the real cause is in the Target's Build Settings. I moved everything from Header Search Paths to User Header Search Paths and it is fixed. In my case, the framework I'm working with is RestKit.
BTW, I came up with this because I was adding another project (QuickDialog) into my project and I was curious that it is using User Header Search Paths, but not Header Search Paths. Here is the difference between them.
You can able to fix that issue by change build settings like this, PreCompile Prefix Headers :NO
FYI, if one file doesn't have code sense but the rest of your project does, check that its added to a target. Once I did that I got code sense back in that file.
It's been ages but the answer is just to move the code into a new folder and the code sense should be working now.
This happened when I added a new Objective-C Class and the code sense doesn't work only on the newly added .m and .h files (on XCode 4 latest update during this post).
Close all xcode windows
Delete all your projects from xcode>window>organizer and restart your project. It will now sense and index your project properly.
I wrote about it in detail here.
Basically my fix was that with localization. I upgraded from xcode 3.2.5 to xcode 4 and then screwed around with built in interface builder and turned on localization for a XIB file accidently which placed my source files in en.lproj directory. After moving them back to Classes folder it worked perfectly.
Again, for the sake of helping others with this issue which, in my case, happened upon upgrading to Xcode 4.3.
Of course I tried the solutions offered in this post, and none of them worked. But the suggestion to move the location of the project in Finder brought back some Code Sense, but the suggestions didn't make any sense.
I ended up deleting my project and re-cloned it from the git repository.That brougt back Code Sense for me...
I open a second project in the background whenever my Xcode's code sensing stops working (it usually works the first time i open the project but after a while code sense no longer works). So what i do is to open a second project in Xcode. Xcode will start indexing the second project and magically the code sense for my main project is back.
Running Xcode 4.3.1 on Lion
Hope this helps someone.
From this comment here I was able to debug the problem on my end, it seemed to be a bad -w flag that the clang preprocessor wasn't recognizing properly. Basically, running
defaults write com.apple.dt.Xcode IDEIndexingClangInvocationLogLevel 3
in Terminal increases the verbosity of the indexer, and should help you track down issues. Open Console.app and look for messages from Xcode, the search string IDEIndexingClangInvocation helped me find them.
For me it happened simply because the file had no target membership. If the first few answers did not work for you, go to your .m file (presumably it's this file that you're having trouble with), open the Utilities view (Edit -> Utilities -> Show File Inspector) and under "Target Membership" check the target to which you want this file to belong.