Installed/running Ontotext GraphDB v10.1.0 (free desktop windows). All working fine, create repositories, run SPARQL, etc.
The server and UI are both loading/running/reporting repositories in the C:\Users<Username>\AppData\Roaming\Graph\data\repositories folder.
However, when running the ImportRdf.cmd utility, its "attaching to"/creating the repository in C:\Users<Username>\AppData\Local\Graph\data\repositories folder instead!?
Tried adding the correct path into C:\Users<user>\AppData\Local\GraphDB Desktop\app\GraphDB Desktop.cfg but makes no difference.
Anyone experienced this/got any fixes?
The data /repository/ directory can be set through the system or config property graphdb.home.data. The default value is the data subdirectory relative to the GraphDB home directory. For example, one way to configure it: Go in bin folder of graphdb distribution and start graphdb with the following command:
./graphdb -Dgraphdb.home="full path to where you want your repo directory".
I've tried everything I could find on this topic, yet I'm not able to install Maven.
I'm at the following point:
I have java installed
I unzipped the files from the apache website
I have set up environment variables and added requirement parameters to the path (had to use the escape character in the path, because of the space in Program Files folder name: C:\Program^ Files\apache-maven-3.6.3)
what could be the problem?
cmd
From the attached image all requirements are OK. Try one of those two solutions:
Close the CMD window and reopen it (if you didn't this already).
Restart your computer in in order to apply the environment variables you've just added.
I'm implementing an instance of Parse Server, I want know where the Parse Server Allocated the files ?
According to File Adapter, the default file storage is GridFS in mongodb.
Depends on the operating system and type of installation you used.
If installed on a linux/unix using the global install npm install -g parse-server mongodb-runner then your parse-server files will normally be under usr/lib/node_modules/parse-server. ( may differ from linux versions )
be careful when editing these files for hot hacks or modifications. If you later choose to upgrade parse-server they will be overwritten.
Your cloud file directly is normally created by you. So this could be home/parse/cloud/main.js. This can be in any location of your choice. To set a new location you will set that in the index file or json (depending on your startup process ).
cloud: '/home/myApp/cloud/main.js', // Absolute path to your Cloud Code
If you installed not using the global install, then obviously you would need to cd to where you cloned the project.
Windows would be similar. Clone (or download the zip) parse-server from the repo. Open a console window and “cd” to the folder where you have cloned/extracted the example server, eq:
cd "C:\parse-server"
Here is where the files will sit on the parse-server. Hopes this helps!
I have installed the Jabbered 15.07 on my MAC OS. After installation, I want to config it by editing the /Applications/ejabberd-15.07/conf/ejabberd.yml. I am not sure whether it is the file I should change, I searched the Internet and found that sb said the configuration is in the folder /etc but I did not found it there. In order to prove that it is the file I want to find, I open the admin interface and add a record in the "ACL" screen. And after that I checked the ejabberd.yml, but it remained unchanged. So is it the configuration file of ejabberd, if it is not which file it should be and how to configure it?
The location of the config file depend on how you installed ejabberd.
Apparently, you used binary installer, not make install, so config file is as your expected:
/Applications/ejabberd-15.07/conf/ejabberd.yml
Admin interface does not change the config file but write in mnesia database. You could configure ejabberd so that database override config file, but this is not a good practice. To make change permanent, you need to edit ejabberd.yml file.
Note: You should use latest ejabberd published version if you are starting today (15.11).
I've been looking all over for decent instructions on how to get hgweb working on IIS but I haven't found much of worth.
There's this "step by step" on the Mercurial wiki, but it's not very good.
There's also this and this, but again, I can't find good steps to lead up to where those get started.
I just had to install a fresh Mercurial instance yesterday, here's updated instructions for 1.7:
Install Mercurial (these instructions were tested with 1.7)
Install Python (for Mercurial 1.7, you must use the x86 version of Python 2.6.6)
You will need to download the hgweb.cgi file from the Mercurial source. You can download the source by running: hg clone https://www.mercurial-scm.org/repo/hg/
Create a folder that will be your web application folder. You will need to copy three things into this folder:
The hgweb.cgi file
The contents of the Library.zip from your "C:\Program Files\Mercurial" folder
The Templates folder from your "C:\Program Files\Mercurial"
You will need to make sure you have Python set up in IIS.
Enable CGI via the following: Control Panel -> Turn Windows Features On or Off -> Roles -> Web Server (IIS) -> Add Role Services -> Check CGI
Create a new Web Site in IIS and make sure the physical path is the folder you created above
In the Handler Mappings for the new website, select "Add Script Map". Enter *.cgi for the request path, c:\Python26\python.exe -u "%s" for the Executable, and Python for the Name.
You will also need to create a file named "hgweb.config" with contents similar to below. The path within the file needs to be the location on your drive where you want to store the Mercurial repositories:
[collections]
c:\Mercurial\repos = c:\Mercurial\repos
Edit the hgweb.cgi file and change the line where it sets the path to your hgweb.config to something like the following (wherever the hgweb.config file is):
config = "C:\Mercurial\hgweb.config"
Now, open a browser and navigate to http://localhost/mercurial/hgweb.cgi (or whatever is the appropriate URL path you set up in IIS) and you should see the Mercurial Repositories page.
Also, check out Jeremy Skinners blog post . It's a little outdated, but has some extra nice steps like setting up URL re-writing for cleaner URL's.
It seems since Mercurial 1.5.2 was released, these tutorials don't work exactly right. For one thing, hgwebdir.cgi has been removed, and is now replaced with hgweb.cgi.
The instructions that worked best for me is at eworldui.net:
http://www.eworldui.net/blog/post/2010/04/08/Setting-up-Mercurial-server-in-IIS7-using-a-ISAPI-module.aspx
Those instructions are meant for IIS 7 or greater. If you're setting this up on IIS 6, I wrote up similar instructions geared toward Win2k3 and IIS 6.0:
http://partialclass.blogspot.com/2010/05/setting-up-mercurial-server-on-win2k3.html
UPDATE: Shortly after getting this working I learned that BitBucket changed their pricing scheme to offer free, unlimited, private hosting: https://bitbucket.org/. I would've opted for that in a heartbeat when I was originally working on this project.
Below are what I did after doing a fair amount of research for geting hgwebdir.cgi setup on IIS6 . It is based on the following sites:
http://python.markrowsoft.com/iiswse.asp
http://www.jeremyskinner.co.uk/mercurial-on-iis7/
You'll need to install the following on the server:
Mercurial (I used version 1.5)
Python 2.6. The version of Python depends on the version of Mercurial installed.
Mercurial 1.5 uses Python 2.6. Install x86 even if you are running x64.
The steps for me were:
Create a directory for the website. I used c:\inetpub\wwwroot\hg.
In IIS, right click on the folder for hg, select properties, select the Home Directory tab.
Click on the Create application button. Set the execute permissions to "scripts".
Still in the Home Directory tab, click on the Configuration button. In the "Application Configuration" popup, click the Add button to add an application extension. The Executable is c:\Python26\python.exe -u "%s" "%s". The extension is .cgi. Set the "verbs" to "limit to: GET,HEAD,POST". Check both Script engine and Verify that file exists.
In the Directory Security tab, click on the Edit button in the Authentication and access control section. Uncheck all authentication methods, and check the "Basic authenication" method. Set the Default domain if you like to your Active Directory domain.
In IIS, click on the Web Service Extensions folder on the left panel. Click on "Add a new Web service extension" link. Extension name should be Python, the required file is c:\Python26\python.exe -u "%s" "%s". Make sure the new extension is "Allowed".
Now is a good time to test that Python is working. Create a file in your new Hg folder called test.cgi. Paste the following python code:
print 'Status: 200 OK'
print 'Content-type: text/html'
print
print '<html><head>'
print ''
print '<h1>It works!</h1>'
print ''
print ''
Open the browser to your site, for instance, http://localhost/hg/test.cgi
You should see "It works!" in the browser.
Next let's get the hgwebdir working.
Delete test.cgi
clone the hg repo to a new directory: https://www.mercurial-scm.org/repo/hg/
copy hgwebdir.cgi to your web directory: c:\inetpub\wwwroot\hg\ from the cloned hg repo
Edit the file and change
application = hgwebdir('hgweb.config')
wsgicgi.launch(application)
to
application = hgwebdir('c:\inetpub\wwwroot\hg\hgweb.config')
wsgicgi.launch(application)
Unzip the Library.zip file in the Mercurial directory, c:\Program Files\Mercurial\, to your web directory, c:\inetpub\wwwroot\hg\
Copy the templates directory from c:\Program Files\Mercurial\templates\ to c:\inetpub\wwwroot\hg\templates\
Create a file called hgweb.config in your web directory.
Now is a good time to test it out. Go to the following URL in the browser, http://localhost/hg/hgwebdir.cgi
Edit hgweb.config, and paste the following:
[collections]
\\server\share$\Hg\ = \\server\share$\Hg\
[web]
allow_push = *
push_ssl = false
These are all my preferences, for instance we have our repos in subdirectories at \\server\share$\Hg. The web app will run under the permissions of the logged in user via the browser, so they'll need read/write permissions to the share.
The last step is to allow for long connections which can happen when you first clone a repo. Run the following command to increase the timeout to 50 minutes:
cd \inetpub\AdminScripts\
cscript adsutil.vbs GET /W3SVC/CGITimeout
cscript adsutil.vbs SET /W3SVC/CGITimeout 3000
Use mercurial to clone the mercurial repository:
hg clone https://www.mercurial-scm.org/repo/hg/
you will find hgwebdir.cgi at the top level. It should install
like any other cgi script.
I've been fighting with this setup for mercurial 1.7.2 for the past week or so, I had to do things slightly differently than the above articles do in order to get it working.
Posting here because google kept bringing me back here....
Full instructions posted here
I followed a combination of these instructions and these (in the source)
The main differences are that I had to do the "pure python" install of mercurial otherwise it would complain about missing dlls, and I found it was important to use the "python installers" for pywin and isapi-wsgi. (maybe this is obvious to experienced python developers, but I'm a python newbie so it was news to me)
Hope this helps somebody and I'm not just making stuff up (I might be, like i said, python newbie)
The hg red book contains some much better general instructions than I've seen in other places. They are not IIS specific, but they are quite good:
http://hgbook.red-bean.com/read/collaborating-with-other-people.html#sec:collab:cgi
I was running into a "...can not load module..." type error and after some reading, the key for me was to ignore the Library.zip file in the Mercurial folder, and instead use the one from C:\Program Files (x86)\TortoiseHg folder.
That tip I found as #6 in this guide:
http://www.endswithsaurus.com/2010/05/setting-up-and-configuring-mercurial-in.html
Hope this helps someone...
I know this is an old question, but I really struggled getting Hg installed on Server 2019 and IIS 10.
Here is what I did to get it working:
Install Python 2.7 which in my case was python-2.7.18.amd64.msi. I will assume it's installed in C:\Python27. Make sure python is added to your path and that pip is installed.
Install Mercurial as a module using pip at the command line:
pip install mercurial
Under Default Web Site add a new application called hg and point it to the directory you want to use to use.
Configure Python as CGI handler in IIS 10.0 for this new website (or the entire web server if you wish). You can do this manually or create/add the follwing to your web.config file:
<system.webServer>
<handlers accessPolicy="Read, Script">
<add name="Python 2.7" path="*.cgi" verb="*" modules="CgiModule" scriptProcessor="C:\Python27\python.exe -u "%s"" resourceType="File" />
</handlers>
</system.webServer>
In the 'hg' application folder create a hgweb.cgi that looks similar to the following:
#!/usr/bin/env python3
#
# An example hgweb CGI script, edit as necessary
# See also https://mercurial-scm.org/wiki/PublishingRepositories
# Path to repo or hgweb config to serve (see 'hg help hgweb')
config = "hgweb.config"
# Uncomment and adjust if Mercurial is not installed system-wide
# (consult "installed modules" path from 'hg debuginstall'):
# import sys; sys.path.insert(0, "/path/to/python/lib")
# Uncomment to send python tracebacks to the browser if an error occurs:
#import cgitb; cgitb.enable()
from mercurial import demandimport
demandimport.enable()
from mercurial.hgweb import hgweb, wsgicgi
application = hgweb(config)
wsgicgi.launch(application)
In the 'hg' application folder create the hgweb.config file and point it at your repos like the following:
[collections]
C:\Web\www\hg\repos\ = C:\Web\www\hg\repos\
Navigate to http://localhost/hg/hgweb.cgi and enjoy!
You can try HgLab. This isn't exactly hgwebdir; rather it is a purely managed Mercurial implementation with push and pull server and repository browser.