I have a tricky question about how to keep the latest log data as my server reposted it two times
This is the result after I grep from my folder :(i have tons of data, just to keep it simpler)
...
20150630-201427.csv:20150630,CFIIASU,233,96.21786,0.44644,
20150630-201427.csv:20150630,CFIIASU_AU,65,90.71109,0.28569
20150630-201427.csv:20150630,CFIIASU_CN,68,102.19569,0.10692
20150630-201427.csv:20150630,CFIIASU_ID,37,98.02484,0.27775
20150630-201427.csv:20150630,CFIIASU_KR,39,98.42257,0.83055
20150630-201427.csv:20150630,CFIIASU_TH,24,99.94482,0.20743
20150701-151654.csv:20150630,CFIIASU,233,96.21450,0.44294
20150701-151654.csv:20150630,CFIIASU_AU,65,90.71109,0.28569
20150701-151654.csv:20150630,CFIIASU_CN,68,102.16538,0.07723
20150701-151654.csv:20150630,CFIIASU_ID,37,98.02484,0.27775
20150701-151654.csv:20150630,CFIIASU_KR,39,98.42257,0.83055
20150701-151654.csv:20150630,CFIIASU_TH,24,99.94482,0.20743
...
The data actually came from many csv files, I only pick two csv files to make the example, and here are some explainations of this:
the example came from two files 20150630-201427.csv and 20150701-151654.csv, and it has 4 columns which correspond to date, datanme, data_column1, data_column2, data_column3.
these line have the same data date 20150630 and the same dataname CFIIASU,CFIIASU_AU...etc, but the numbers in the fourth and fifth column (which are data_column2 and data_column3) are different.
How could i keep the data of 20150701-151654.csv based on the file's name and data date and apply it on my whole data set?
To make it more clearly. I'd like to keep the lines of "the latest csv" and since the latest csv is corresponding to the file's name, which in this example is 2015070. but when it comes to my whole data set i need to handle with so many 20xxxxxx.csv that i can't check it one by one.
for the example, i made this should end up like this:
20150701-151654.csv:20150630,CFIIASU,233,96.21450,0.44294
20150701-151654.csv:20150630,CFIIASU_AU,65,90.71109,0.28569
20150701-151654.csv:20150630,CFIIASU_CN,68,102.16538,0.07723
20150701-151654.csv:20150630,CFIIASU_ID,37,98.02484,0.27775
20150701-151654.csv:20150630,CFIIASU_KR,39,98.42257,0.83055
20150701-151654.csv:20150630,CFIIASU_TH,24,99.94482,0.20743
Thanks in advance.
Your question isn't clear but it sounds like this might be what you're trying to do (print all lines from the last csv mentioned in the input file):
$ tac file | awk -F':' 'NR>1 && $1!=prev{exit} {print; prev=$1}' | tac
20150701-151654.csv:20150630,CFIIASU,233,96.21450,0.44294
20150701-151654.csv:20150630,CFIIASU_AU,65,90.71109,0.28569
20150701-151654.csv:20150630,CFIIASU_CN,68,102.16538,0.07723
20150701-151654.csv:20150630,CFIIASU_ID,37,98.02484,0.27775
20150701-151654.csv:20150630,CFIIASU_KR,39,98.42257,0.83055
20150701-151654.csv:20150630,CFIIASU_TH,24,99.94482,0.20743
or maybe this (print the last line seen for every 20150630,CFIIASU etc. pair in the input file):
$ tac file | awk -F'[:,]' '!seen[$2,$3]++' | tac
20150701-151654.csv:20150630,CFIIASU,233,96.21450,0.44294
20150701-151654.csv:20150630,CFIIASU_AU,65,90.71109,0.28569
20150701-151654.csv:20150630,CFIIASU_CN,68,102.16538,0.07723
20150701-151654.csv:20150630,CFIIASU_ID,37,98.02484,0.27775
20150701-151654.csv:20150630,CFIIASU_KR,39,98.42257,0.83055
20150701-151654.csv:20150630,CFIIASU_TH,24,99.94482,0.20743
I have the following Linux command which I am using to extract data from one very large log file.
sed -n "/<trade>/,/<\/trade>/p" Large.log > output.xml
However, the output is generated in a single file output.xml. My intention is to create a new file every time the "/<trade>/,/<\/trade>/p" is matched. Every new file will be named after the <id> tag which is inside the <trade> </trade> tags.
Something likes this...
sed -n "/<trade>/,/<\/trade>/p" Large.log > "/<id>/,/<\/id>/p".xml
However, that, of course, does not work and I am not sure how to apply a regex as a naming rule.
P.S At this point, I am also not sure if I should use sed or maybe I should try achieving this with awk
I have been working on this little script at work to free up my own time and am currently stuck on part of it. The script is supposed to pull some content from a JSON, modify the content, and then re-upload it. The modification part is the portion that doesn't work.
An example of what the content looks like after being extracted from the JSON is:
<p>App1_v1.0_20160911_release.apk</p<p>App2_v2.0_20160915_beta.apk</p><p>App3_v3.0_20150909_VendorRelease.apk</p>
The modification function is supposed to update the list with the newer app filenames in the same location. I've tried using both SED and AWK to get this to work but I haven't gotten anywhere fast.
Here are examples of both commands and the parameters for the substitution I am trying to run on the example file:
old_name=App1_.*_release.apk
new_name=App1_v1.0_20160920_1152_release.apk
sed "s/$old_name/$new_name/" body > upload
awk -v oldname="$old_name" -v newname="$new_name" '{sub(oldname, newname)}1' body > upload
What ends up happening is the substitution will change the correct part of the list, but then nuke everything between that point and the end of the list.
Thank you for any and all help.
PS: If I didn't explain something correctly or you feel some information is missing, please comment and let me know so I can better explain the problem.
There are SO many possible values of oldname, newname, and your input data that could cause either of the commands you wrote to fail - don't use that "replace a regexp with a backreference-enabled-string" approach in any command, use string operations instead (which means you can't use sed since sed doesn't support strings)
This modifies your sample input as you say you want:
$ awk -v new='App1_v1.0_20160920_1152_release.apk' 'BEGIN{RS="</p>\n?"; FS=OFS="<p>"} NR==1{$2=new} {printf "%s%s", $0, RT}' file
<p>App1_v1.0_20160920_1152_release.apk<p>App2_v2.0_20160915_beta.apk</p><p>App3_v3.0_20150909_VendorRelease.apk</p>
If that's not adequate then edit your question to better explain your requirements and provide more truly representative sample input/output.
The above uses GNU awk for multi-char RS and RT.
I am essentially trying to use sed to remove a few lines within a text document. To clean it up. But I'm not getting it right at all. Missing something and I have no idea what...
#!/bin/bash
items[0]='X-Received:'
items[1]='Path:'
items[2]='NNTP-Posting-Date:'
items[3]='Organization:'
items[4]='MIME-Version:'
items[5]='References:'
items[6]='In-Reply-To:'
items[7]='Message-ID:'
items[8]='Lines:'
items[9]='X-Trace:'
items[10]='X-Complaints-To:'
items[11]='X-DMCA-Complaints-To:'
items[12]='X-Abuse-and-DMCA-Info:'
items[13]='X-Postfilter:'
items[14]='Bytes:'
items[15]='X-Original-Bytes:'
items[16]='Content-Type:'
items[17]='Content-Transfer-Encoding:'
items[18]='Xref:'
for f in "${items[#]}"; do
sed '/${f}/d' "$1"
done
What I am thinking, incorrectly it seems, is that I can setup a for loop to check each item in the array that I want removed from the text file. But it's simply not working. Any idea. Sure this is basic and simple and yet I can't figure it out.
Thanks,
Marek
Much better to create a single sed script, rather than generate 19 small scripts in sequence.
Fortunately, generating a script by joining the array elements is moderately easy in Bash:
regex=$(printf '\|%s' "${items[#]}")
regex=${regex#'\|'}
sed "/^$regex/d" "$1"
(Notice also the addition of ^ to the final regex -- I assume you only want to match at beginning of line.)
Properly, you should not delete any lines from the message body, so the script should leave anything after the first empty line alone:
sed "1,/^\$/!b;/$regex/d" "$1"
Add -i if you want in-place editing of the target file.
Problem: I have two folders (one is Delta Folder-where the files get updated, and other is Original Folder-where the original files exist). Every time the file updates in Delta Folder I need merge the file from Original folder with updated file from Delta folder.
Note: Though the file names in Delta folder and Original folder are unique, but the content in the files may be different. For example:
$ cat Delta_Folder/1.properties
account.org.com.email=New-Email
account.value.range=True
$ cat Original_Folder/1.properties
account.org.com.email=Old-Email
account.value.range=False
range.list.type=String
currency.country=Sweden
Now, I need to merge Delta_Folder/1.properties with Original_Folder/1.properties so, my updated Original_Folder/1.properties will be:
account.org.com.email=New-Email
account.value.range=True
range.list.type=String
currency.country=Sweden
Solution i opted is:
find all *.properties files in Delta-Folder and save the list to a temp file(delta-files.txt).
find all *.properties files in Original-Folder and save the list to a temp file(original-files.txt)
then i need to get the list of files that are unique in both folders and put those in a loop.
then i need to loop each file to read each line from a property file(1.properties).
then i need to read each line(delta-line="account.org.com.email=New-Email") from a property file of delta-folder and split the line with a delimiter "=" into two string variables.
(delta-line-string1=account.org.com.email; delta-line-string2=New-Email;)
then i need to read each line(orig-line=account.org.com.email=Old-Email from a property file of orginal-folder and split the line with a delimiter "=" into two string variables.
(orig-line-string1=account.org.com.email; orig-line-string2=Old-Email;)
if delta-line-string1 == orig-line-string1 then update $orig-line with $delta-line
i.e:
if account.org.com.email == account.org.com.email then replace
account.org.com.email=Old-Email in original folder/1.properties with
account.org.com.email=New-Email
Once the loop finishes finding all lines in a file, then it goes to next file. The loop continues until it finishes all unique files in a folder.
For looping i used for loops, for splitting line i used awk and for replacing content i used sed.
Over all its working fine, its taking more time(4 mins) to finish each file, because its going into three loops for every line and splitting the line and finding the variable in other file and replace the line.
Wondering if there is any way where i can reduce the loops so that the script executes faster.
With paste and awk :
File 2:
$ cat /tmp/l2
account.org.com.email=Old-Email
account.value.range=False
currency.country=Sweden
range.list.type=String
File 1 :
$ cat /tmp/l1
account.org.com.email=New-Email
account.value.range=True
The command + output :
paste /tmp/l2 /tmp/l1 | awk '{print $NF}'
account.org.com.email=New-Email
account.value.range=True
currency.country=Sweden
range.list.type=String
Or with a single awk command if sorting is not important :
awk -F'=' '{arr[$1]=$2}END{for (x in arr) {print x"="arr[x]}}' /tmp/l2 /tmp/l1
I think your two main options are:
Completely reimplement this in a more featureful language, like perl.
While reading the delta file, build up a sed script. For each line of the delta file, you want a sed instruction similar to:
s/account.org.com.email=.*$/account.org.email=value_from_delta_file/g
That way you don't loop through the original files a bunch of extra times. Don't forget to escape & / and \ as mentioned in this answer.
Is using a database at all an option here?
Then you would only have to write code for extracting data from the Delta files (assuming that can't be replaced by a database connection).
It just seems like this is going to keep getting more complicated and slower as time goes on.