I have a small problem. In bash scripting i need to run an xterm who do some things like this.
xterm -e "(time ./program.exe 127.0.0.1) 2> out.txt"
How can i say the pid of this process?
I need to wait who it finisced for write the output and merge with another fine.
Thank so much to all!!
Basically you start the process in the background by adding & to the end of your command, get the last started pid with $! and wait on the process to complete with wait. So, something like:
xterm -e "(time ./program.exe 127.0.0.1) 2> out.txt" &
pid=$!
wait $pid
should work.
Related
I'm writing a wrapper script to use in inittab.
This script starts a daemon and waits for it to terminate.
Here's what I have currently:
#!/bin/bash
/usr/local/bin/mydaemon --lots_of_params_here
while kill -0 `echo $!` 2> /dev/null; do sleep 1; done;
The problem is with the second line; it just returns immediately. If I instead do:
while kill -0 `pgrep mydaemon` 2> /dev/null; do sleep 1; done;
It all works fine, but this isn't a good solution for me as I have other scripts with the prefix mydaemon.
What am I doing wrong?
EDIT:
The problem seems to be related to the daemon fork(). So, I always get the parent pid in $!. I'm looking for ways to solve this problem. Maybe I should use pid files and have mydaemon write its pid there.
You can do the following way to get through your issue.
#!/bin/bash
/usr/local/bin/mydaemon --lots_of_params_here &
wait $!
wait command will wait till the process completes and comes out.
If you are looking for to wait after some other commands then you can store the PID in any other variable and use that.
#!/bin/bash
/usr/local/bin/mydaemon --lots_of_params_here &
mypid=$!
### Some other commands
wait $mypid
I am running the following script
#! /bin/bash
HOSTLIST="192.168.0.5 192.168.22.1"
DELAY=3
stty echo
exec 4>&1
for HOST in $HOSTLIST ; do
telnet $HOST 135 | grep Connected & pid=$!
echo "Checking $HOST"
sleep $DELAY
kill -9 $pid &> /dev/null
done
However, when it finishes, the Telnet connections are still being attempted in the background which spams annoying "telnet: unable to connect" errors randomly for the next few moments. I tried adding killing the process to stop this but it still does it. Am I doing something wrong for killing the process?
Also I have to use telnet, can't use netcat or nmap.
The pid you are trying to kill is the pid of the grep since $! is the pid of the most recently executed background command. If you hadn't thrown away stderr when trying to kill it might have provided some clue...
BTW, kill -9 is a serious code smell. Any well behaved process can be killed by at least one of the -INT, -HUP, -TERM or -QUIT signals. You should never need to kill -KILL. It's bad because it doesn't give the process opportunity to clean up its mess.
I have created a shell script that runs multiple processes in the background, and at the end listens for the user's keyboard, when enter is pressed, it kills the previously created processes.
Something like :
#!/bin/sh
process_1 &
process_2 &
process_3 &
read -p "PRESS [ENTER] TO TERMINATE PROCESSES." PRESSKEY
kill -2 `jobs -p`
Notice that I run the processes in the background (the later &), I thought that when I do something like :
kill -2 `jobs -p`
All the jobs running in the background would be killed, but it actually tells me that my command is invalid, so I assume that jobs -p doesn't return anything.
Any idea on how to kill process_1 process_2 and process_3 ?? Thanks in advance.
You can store the PIDs in a space separated list and kill that:
process_1 & pids="${pids-} $!"
process_2 & pids="${pids-} $!"
process_3 & pids="${pids-} $!"
read -p "PRESS [ENTER] TO TERMINATE PROCESSES." PRESSKEY
kill -2 $pids # Without quotes to make the PIDs separate arguments
(The ${pids-} syntax is to avoid errors when using set -o nounset.)
Try this:
kill $(ps|grep 'process_1'|awk '{print $1}')
Explanation:
ps returns a list of running process. We grep for only the one we want to kill and the use awk to get only the PID of the process.
I want to start a couple of jobs on different machines using ssh. If the user then interrupts the main script I want to shut down all the jobs gracefully.
Here is a short example of what I'm trying to do:
#!/bin/bash
trap "aborted" SIGINT SIGTERM
aborted() {
kill -SIGTERM $bash2_pid
exit
}
ssh -t remote_machine /foo/bar.sh &
bash2_pid=$!
wait
However the bar.sh process is still running the remote machine. If I do the same commands in a terminal window it shuts down the process on the remote host.
Is there an easy way to make this happen when I run the bash script? Or do I need to make it log on to the remote machine, find the right process and kill it that way?
edit:
Seems like I have to go with option B, killing the remotescript through another ssh connection
So no I want to know how do I get the remotepid?
I've tried a something along the lines of :
remote_pid=$(ssh remote_machine '{ /foo/bar.sh & } ; echo $!')
This doesn't work since it blocks.
How do I wait for a variable to print and then "release" a subprocess?
It would definitely be preferable to keep your cleanup managed by the ssh that starts the process rather than moving in for the kill with a second ssh session later on.
When ssh is attached to your terminal; it behaves quite well. However, detach it from your terminal and it becomes (as you've noticed) a pain to signal or manage remote processes. You can shut down the link, but not the remote processes.
That leaves you with one option: Use the link as a way for the remote process to get notified that it needs to shut down. The cleanest way to do this is by using blocking I/O. Make the remote read input from ssh and when you want the process to shut down; send it some data so that the remote's reading operation unblocks and it can proceed with the cleanup:
command & read; kill $!
This is what we would want to run on the remote. We invoke our command that we want to run remotely; we read a line of text (blocks until we receive one) and when we're done, signal the command to terminate.
To send the signal from our local script to the remote, all we need to do now is send it a line of text. Unfortunately, Bash does not give you a lot of good options, here. At least, not if you want to be compatible with bash < 4.0.
With bash 4 we can use co-processes:
coproc ssh user#host 'command & read; kill $!'
trap 'echo >&"${COPROC[1]}"' EXIT
...
Now, when the local script exits (don't trap on INT, TERM, etc. Just EXIT) it sends a new line to the file in the second element of the COPROC array. That file is a pipe which is connected to ssh's stdin, effectively routing our line to ssh. The remote command reads the line, ends the read and kills the command.
Before bash 4 things get a bit harder since we don't have co-processes. In that case, we need to do the piping ourselves:
mkfifo /tmp/mysshcommand
ssh user#host 'command & read; kill $!' < /tmp/mysshcommand &
trap 'echo > /tmp/mysshcommand; rm /tmp/mysshcommand' EXIT
This should work in pretty much any bash version.
Try this:
ssh -tt host command </dev/null &
When you kill the local ssh process, the remote pty will close and SIGHUP will be sent to the remote process.
Referencing the answer by lhunath and https://unix.stackexchange.com/questions/71205/background-process-pipe-input I came up with this script
run.sh:
#/bin/bash
log="log"
eval "$#" \&
PID=$!
echo "running" "$#" "in PID $PID"> $log
{ (cat <&3 3<&- >/dev/null; kill $PID; echo "killed" >> $log) & } 3<&0
trap "echo EXIT >> $log" EXIT
wait $PID
The difference being that this version kills the process when the connection is closed, but also returns the exit code of the command when it runs to completion.
$ ssh localhost ./run.sh true; echo $?; cat log
0
running true in PID 19247
EXIT
$ ssh localhost ./run.sh false; echo $?; cat log
1
running false in PID 19298
EXIT
$ ssh localhost ./run.sh sleep 99; echo $?; cat log
^C130
running sleep 99 in PID 20499
killed
EXIT
$ ssh localhost ./run.sh sleep 2; echo $?; cat log
0
running sleep 2 in PID 20556
EXIT
For a one-liner:
ssh localhost "sleep 99 & PID=\$!; { (cat <&3 3<&- >/dev/null; kill \$PID) & } 3<&0; wait \$PID"
For convenience:
HUP_KILL="& PID=\$!; { (cat <&3 3<&- >/dev/null; kill \$PID) & } 3<&0; wait \$PID"
ssh localhost "sleep 99 $HUP_KILL"
Note: kill 0 may be preferred to kill $PID depending on the behavior needed with regard to spawned child processes. You can also kill -HUP or kill -INT if you desire.
Update:
A secondary job control channel is better than reading from stdin.
ssh -n -R9002:localhost:8001 -L8001:localhost:9001 localhost ./test.sh sleep 2
Set job control mode and monitor the job control channel:
set -m
trap "kill %1 %2 %3" EXIT
(sleep infinity | netcat -l 127.0.0.1 9001) &
(netcat -d 127.0.0.1 9002; kill -INT $$) &
"$#" &
wait %3
Finally, here's another approach and a reference to a bug filed on openssh:
https://bugzilla.mindrot.org/show_bug.cgi?id=396#c14
This is the best way I have found to do this. You want something on the server side that attempts to read stdin and then kills the process group when that fails, but you also want a stdin on the client side that blocks until the server side process is done and will not leave lingering processes like <(sleep infinity) might.
ssh localhost "sleep 99 < <(cat; kill -INT 0)" <&1
It doesn't actually seem to redirect stdout anywhere but it does function as a blocking input and avoids capturing keystrokes.
The solution for bash 3.2:
mkfifo /tmp/mysshcommand
ssh user#host 'command & read; kill $!' < /tmp/mysshcommand &
trap 'echo > /tmp/mysshcommand; rm /tmp/mysshcommand' EXIT
doesn't work. The ssh command is not on the ps list on the "client" machine. Only after I echo something into the pipe will it appear in the process list of the client machine. The process that appears on the "server" machine would just be the command itself, not the read/kill part.
Writing again into the pipe does not terminate the process.
So summarizing, I need to write into the pipe for the command to start up, and if I write again, it does not kill the remote command, as expected.
You may want to consider mounting the remote file system and run the script from the master box. For instance, if your kernel is compiled with fuse (can check with the following):
/sbin/lsmod | grep -i fuse
You can then mount the remote file system with the following command:
sshfs user#remote_system: mount_point
Now just run your script on the file located in mount_point.
How can you suppress the Terminated message that comes up after you kill a
process in a bash script?
I tried set +bm, but that doesn't work.
I know another solution involves calling exec 2> /dev/null, but is that
reliable? How do I reset it back so that I can continue to see stderr?
In order to silence the message, you must be redirecting stderr at the time the message is generated. Because the kill command sends a signal and doesn't wait for the target process to respond, redirecting stderr of the kill command does you no good. The bash builtin wait was made specifically for this purpose.
Here is very simple example that kills the most recent background command. (Learn more about $! here.)
kill $!
wait $! 2>/dev/null
Because both kill and wait accept multiple pids, you can also do batch kills. Here is an example that kills all background processes (of the current process/script of course).
kill $(jobs -rp)
wait $(jobs -rp) 2>/dev/null
I was led here from bash: silently kill background function process.
The short answer is that you can't. Bash always prints the status of foreground jobs. The monitoring flag only applies for background jobs, and only for interactive shells, not scripts.
see notify_of_job_status() in jobs.c.
As you say, you can redirect so standard error is pointing to /dev/null but then you miss any other error messages. You can make it temporary by doing the redirection in a subshell which runs the script. This leaves the original environment alone.
(script 2> /dev/null)
which will lose all error messages, but just from that script, not from anything else run in that shell.
You can save and restore standard error, by redirecting a new filedescriptor to point there:
exec 3>&2 # 3 is now a copy of 2
exec 2> /dev/null # 2 now points to /dev/null
script # run script with redirected stderr
exec 2>&3 # restore stderr to saved
exec 3>&- # close saved version
But I wouldn't recommend this -- the only upside from the first one is that it saves a sub-shell invocation, while being more complicated and, possibly even altering the behavior of the script, if the script alters file descriptors.
EDIT:
For more appropriate answer check answer given by Mark Edgar
Solution: use SIGINT (works only in non-interactive shells)
Demo:
cat > silent.sh <<"EOF"
sleep 100 &
kill -INT $!
sleep 1
EOF
sh silent.sh
http://thread.gmane.org/gmane.comp.shells.bash.bugs/15798
Maybe detach the process from the current shell process by calling disown?
The Terminated is logged by the default signal handler of bash 3.x and 4.x. Just trap the TERM signal at the very first of child process:
#!/bin/sh
## assume script name is test.sh
foo() {
trap 'exit 0' TERM ## here is the key
while true; do sleep 1; done
}
echo before child
ps aux | grep 'test\.s[h]\|slee[p]'
foo &
pid=$!
sleep 1 # wait trap is done
echo before kill
ps aux | grep 'test\.s[h]\|slee[p]'
kill $pid ## no need to redirect stdin/stderr
sleep 1 # wait kill is done
echo after kill
ps aux | grep 'test\.s[h]\|slee[p]'
Is this what we are all looking for?
Not wanted:
$ sleep 3 &
[1] 234
<pressing enter a few times....>
$
$
[1]+ Done sleep 3
$
Wanted:
$ (set +m; sleep 3 &)
<again, pressing enter several times....>
$
$
$
$
$
As you can see, no job end message. Works for me in bash scripts as well, also for killed background processes.
'set +m' disables job control (see 'help set') for the current shell. So if you enter your command in a subshell (as done here in brackets) you will not influence the job control settings of the current shell. Only disadvantage is that you need to get the pid of your background process back to the current shell if you want to check whether it has terminated, or evaluate the return code.
This also works for killall (for those who prefer it):
killall -s SIGINT (yourprogram)
suppresses the message... I was running mpg123 in background mode.
It could only silently be killed by sending a ctrl-c (SIGINT) instead of a SIGTERM (default).
disown did exactly the right thing for me -- the exec 3>&2 is risky for a lot of reasons -- set +bm didn't seem to work inside a script, only at the command prompt
Had success with adding 'jobs 2>&1 >/dev/null' to the script, not certain if it will help anyone else's script, but here is a sample.
while true; do echo $RANDOM; done | while read line
do
echo Random is $line the last jobid is $(jobs -lp)
jobs 2>&1 >/dev/null
sleep 3
done
Another way to disable job notifications is to place your command to be backgrounded in a sh -c 'cmd &' construct.
#!/bin/bash
# ...
pid="`sh -c 'sleep 30 & echo ${!}' | head -1`"
kill "$pid"
# ...
# or put several cmds in sh -c '...' construct
sh -c '
sleep 30 &
pid="${!}"
sleep 5
kill "${pid}"
'
I found that putting the kill command in a function and then backgrounding the function suppresses the termination output
function killCmd() {
kill $1
}
killCmd $somePID &
Simple:
{ kill $! } 2>/dev/null
Advantage? can use any signal
ex:
{ kill -9 $PID } 2>/dev/null