Long story short, I made an app, and now that it is done, I thought of a better name.
When I change the product name, it asks if I want to let it automatically change the name everywhere else. Unfortunately, after doing so, I deploy the app, but it still shows the old name on my device. I have tried many things to fix it, but no luck.
Any ideas?
Did you try deleting the app from the device and cleaning the targets on the project before deploying to the device again.
Related
I'm creating a cordova app for Windows.
Now when I build this normally (with my own identity of which I have no clue where he gets it from) everything works fine and my app launches with success.
Although when I then associate my app with the Store, and have my actual app name + package name etc filled in for me, I get a blank screen when trying to run my app.
The head and body tags stay empty and no error is thrown in my JavaScript console.
Any idea of why this happens? The problem definitely is that I associate my app with the Store and then something happens which makes my app crash or fail to start.
But why does it do this? And how can I resolve it?
(currently building with VS2017)
edit
Alright, so I figured out that because the package name changed, I had to edit that as well in the manifest. Now My main root component is loaded, but it isn't setting the app root to any page, just a blank screen. (with a menu that can open on swipe).
Alright, so my Microsoft assigned package name was different than my own. This caused the app to look for my own package name instead of the Microsoft one I associated with.
The solution was quite simple, just set your widget-id in your config.xml to the Microsoft assigned package name and rebuild your solution.
(I was using Ionic framework so re-execute ionic build windows --release --prod --arch="arm")
I have created the document picker extension(Both File provide and document picker , with the default implementations) and when i try to open the extension using the DocumentPickerViewController, its immediately closing the DocumentPickerViewController by showing the below issue
plugin com.apple.UIKit.fileprovider.default invalidated.
I have setup the basic app groups and iCloud entitlement as well, Which are all fine. Even from the documentViewController the default iCloud is working perfectly fine.
Actually i am testing the extension using the same container application.
If somebody can provide some insight about this behavior, it would be a great help !!
Thanks,
Vishnu
I got the issue, actually the value of NSExtensionFileProviderDocumentGroup key was put incorrectly put on the info.plist of the file provider extension by XCode by the time of adding the App group.
Then I compared the files with the NBox sample from Apple and finally figured it out.
So sometimes beware of XCode automatic actions, make a cross check so to save to time.
I have been developing an OSX app with Delphi XE3 and running into various problems. The latest one is with the sanboxed version built for the Apple Appstore.
The user has to select an arbitrary folder and the app needs to get access to it. Since there is a problem with the OpenDialog, I had to turn to drag-drop functionality instead.
The user drags a folder to the app, the sandbox gives the app temporary access to it and all works properly.
To preserve the access to this folder when the app is restarted I have to use the so-called "security-scoped bookmarks"
I am having two issues with them:
1) How to add the "com.apple.security.files.bookmarks.app-scope" entitlement to an XE3 firemonkey app? It is not available in the Project Options->Entitlements. If I add it manually in the ".entitlements" file it gets overwritten when the app is built.
So is there a way to add a custom entitlement that is not in the list in the project options?
2) To create the bookmark I should use the NSURL.bookmarkDataWithOptions method. I think it should be used like this, but I am not sure of the exact syntax:
var
URL: NSURL;
Err: NSError;
Data: NSData;
...
URL := TNSURL.Create;
Data := URL.bookmarkDataWithOptions(NSURLBookmarkCreationWithSecurityScope, nil, #Err);
...
Maybe there should be a call to Wrap(...) instead of Create.
I have not yet experimented with it, because it is pointless without the answer to issue 1).
It seems no one has written anything about these problems for Delphi, but I hope someone here has experience with that.
Thanks in advance.
Edit:
For problem 1) I tried to add edit manually the ".entitlements" file in the OSX32 folder and set it to read-only to prevent it from being overwritten. It was too easy to be true of course, because the linker complained that the file can not be modified...
OK, I finally found the way to manually add entitlements that are not available in the Project Options > Entitlements.
Instead of selecting the "App Store" build in the Project Manager you have to select a Normal release build and deploy the application as usual.
The application gets deployed in the PAServer scratch-dir as APP package. Inside this package there is an "Entitlements.plist" file, which is in XML format and can be edited with a text editor. It is quite obvious how to add new entitlements once you open the file.
After it is edited, the app has to be code-signed manually and a package has to be prepared. It is slightly more complicated than using the Delphi IDE, but there are instructions about it on the Embarcadero and Apple websites and it actually went without problems.
Still haven't tried the bookmarkDataWithOptions functions.
An alternative could be to deactivate the checkbox for the entitlements-file in the deployment page.
But attention: Evry time you change between Build/Release or App Store/Normal, delphi activates the checkbox. That means you have to deactivate it again in the deplayment-page, to avoid the transfer of this file to the mac PC.
By the way: Do you have tryed meanwhile the StartAccessingSecurityScopedResource function?
In the MacApi.Foundation unit the function is not declared in the NSURL interface.
Do you have found a way to use this function?
I have one app, I copied the whole folder and proceeded to edit it out, turning it into a new app.
Now, during testing, if I debug the first app (let's call it parent app), and then proceed to debug the second app (child app), the parent app is no longer there. It has been replaced by the child app and vice versa.
Digging deeper into this, I proceed to change out some of the Properties. I changed the Assembly Information to fit it properly, changed the GUID and all.
The only piece of data that stays the same is the Assembly name. The Assembly name is the same for both of the apps because changing it is a bit trickier since I get an debugger error if I do that.
My question is what makes an app unique and how could I achieve to have both the apps installed at the same time ?
Apparently, an app is considered unique based on the
ProductID="{XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}" line found in the WPManifest.xml.
This line can't be found in the Properties, and can only be found in the mentioned xml.
I am creating a newsstand application. the application is ready, now i am trying to upload the app in apple store using Application Loader. While uploading the zip file its showing the error message as
Unable to process application info.plist validation at this time due to a general error (1095)
I googled this in the net, but did not find the solution still.
This is clearly an Apple server issue, not an Xcode/iOS/OSX issue. Just wait patiently and Apple's servers will catch up to the traffic, or solve whatever issues they're having at their end.
If you're anxious, feel free to just sit there and restart Xcode until it works - but it's not restarting Xcode, only the time you waste that's solving the issue.
While you're waiting, run your apps in Instruments and solve some performance issues ;)
I just had this error. I waited an hour and tried again with the exact same build and it was all good. Vote for it being Apple's temporary glitch.
I had the same problem. I closed Xcode, restart my computer and it worked.
One possible problem to this is corrupted png files. The png files should not be interlaced
I found a solution to the problem.
If you're using Xcode 4+, you don't have to use Application Loader anymore. Instead you should archive your project in Xcode (Product->Archive). It will then open the organizer, where 3 buttons are displayed. Hit the submit button.
If you've created an entry for your app with Itunes Connect, you should be able to choose that from the list, and then select your distribution profile. Then hit the next button, and you should get a message, that tells you, that your app has been submitted.
At least that worked for me.
Use Application Loader.
I'm getting this a lot today.
Application Loader worked.
XCode > Project > Archive
XCode > Organizer > Distribute > Enterprise/add Hoc > Save As
Saves as YOURAPP.ipa.
Make sure Save for Enterprise Deploy remains UNCHECKED.
Download latest Application Loader.
tap 'Deliver Your App'
make sure new version in itunes connect in WAITING FOR UPLOAD state
Click on Activity... button
TIP: open Console.app to see XCode Validation errors
Click on ALL MESSAGE on list of logs on right.
Then in search enter 'XCode' or 'Application Loader'
to monitor any errors with your upload.
Note:
I did all this and still got email about missing 120x120 icons.
Forgot to update them in Build Target > General Tab
List of new icon requirements for iOS7
http://www.icenium.com/resources/forums/icenium-general-discussion/missing-recommended-icon-file
Another reason why this can happen is the duplicate product name. Despite your app names, executable names, display names or bundle IDs are different, if the product name exists in your current apps this error is gonna occur.
"The server returned an invalid response. This may indicate that a network proxy is interfering with communication, or that Apple servers are having issues. Please try your request again later.""
Reset The internet connection.
Reopen the xcode.
Set the profile again.
Clean build.
And Archive the build.
Works perfect for me (With in 5 minutes no need to wait).
Thanks
It's just the time, because you can't control Apple's Server's traffic problem, We all merely become the victim of that..So cut the long story short...
By restarting XCODE may work but everyone as in my case, i tried by restarting XCODE, SYSTEM, ROUTER and anything and everything possible, only error name had changed from "The network connection was lost" to "The request timed out" and vice Versa..!
Just think at what time less people would be accessing the sever...
PS: Only perseverance can help you in this way..keep redialing..And WAIT and WATCH:P
I solved ... :)
Please remove all your icons and splash image also remove icon Files and icons File( IOS 5 ) from info.plist and then add all your icons to app bundle ...
After this update info.plist iconFiles field add desired name of icons....
And last but not least remove Provisioning profile from developer portal and recreate it ...
Clean your build and Archive it and using Application Loader submit it to AppStore ...
it work for me and i think it may help you...
Not every time not it is Apple server issue,sometime we did some bad linking according to me :)